My computer's hard drive is replaced and the tech said that I have to disable my Adobe Photoshop CS2, before it don't change.  I did help in the program and said that the transfer moved not because the server is not available. What should I do?

Similar Questions

• "this computer's hard drive is smaller than the original hard drive shipped.

  Computer model: p7-1058uk Hi, I'm trying to reinstall my windows recovery kit 7 I bought from best2serve my OCZ Vertex 60 GB ssd Series 3. But I get this error message "this computer's hard drive is smaller than the original supplied hard disk. The recovery process cannot continue"I actually managed to install this recovery on the same front drive kit when I bought first. Any ideas as to why its not working now? I have formatted the ssd drive, deleted the partition and creates a new one with a program called gparted. I can't access my computer until I can reinstall this recovery again kit. Thank you

  Hello:

  I'm surprised that the same recovery disks set worked the first time.  Unfortunately, the error you are getting is the norm. I don't know any solution other than to get a bigger hard drive to the approximate size as the original.

  I have a solution for you if you want to use...

  If you can read the product key 25 character Windows 7 on the sticker COST Microsoft on your PC, you can download single files Windows 7 ISO to burn it to a DVD for the version of windows (Pro, home) that is installed on your PC, and which is listed on the sticker COST Microsoft on the PC.

  You must also select the language installation provided with your PC, or the product key will not work.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program.

  Use the 25-character product key to activate the installation. It's good for the 32-bit or 64-bit version of W7.

  Then go to the support page and drivers for your PC install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Rented a movie on iTuens Store. The computer exploded, when I logged in again, the film was gone. What should do?

  Rented a movie on iTuens Store. The computer exploded, when I logged in again, the film was gone. What should do?

  I can't find the rented movie more.

  Fact store > check for available in the menu downloads find it? If not, and if it is not already in the movies section of your library, then contact iTunes Support (they should give you a redownload): http://reportaproblem.apple.com

• Is there a 64-bit firefox? And in the server ftp mozila firefox what should I download? Here I have a folder name win64 in all versions it is 64-bit?

  I just copied the question there do not read because it's the same thing... Is there a 64-bit firefox? And in the server ftp mozila firefox what should I download? Here I have a folder name win64 in all versions it is 64-bit?

  There is no version of Firefox 64-bit yet for Windows but it was Firefox 64-bit for Mac OSX (dmg combined 32/64) and Linux since Firefox 4.0

  As said that there is Firefox Win64 on beta channel for a test as described above but this does not mean there will be for Firefox exit 39.0 Win64. He's been Win64 versions on channel Beta Firefox 37.0 b #.

• When I try and download windows 7 from the internet it tells that my connection is not stable what should I do?

  He tells me that my connection is not stable, but I can do everything he tells me on google chrome and internet explore. I also did what he told me and still can't download.

  Try to use an Internet Download Manager:

  Internet Download Manager - free software downloads and software...

• a window keeps coming up saying that my windows is not genuine what should I do?

  A window keeps popping up at random times saying that my wdws is not authentic.  I click on the option "more in line" and takes me on the microsoft site.  What should I do?

  For a list of frequently asked questions (FAQ), visit the following Web site:
  http://Windows.Microsoft.com/en-AU/Windows/help/genuine/FAQ

  Request a genuine Windows support
  http://Windows.Microsoft.com/en-AU/Windows/help/genuine/submit-request

  Microsoft Genuine Advantage Forums-
  http://social.Microsoft.com/forums/en-us/category/genuine

• Using Windows Vista, when openinga link in Windows Mail that I get "Application not found", what should I do?

  When you try to open an attachment or a link, I get a sign pop up "Application not found".  If I leave my web site providers (Comcast), I open the attachments and links very well.

  For attachments, save them to disk and then right click on them and go to properties and click the button change and indicate what program should open it.   For links, go to the control panel. Default programs | Associate a file type or Protocol with a program and a page down to the HTTP and HTTPS protocols, and set IE as default.

  See also paragraphs 3 and 15 here: www.oehelp.com/OETips.aspx#3

  and it can help to compact and repair the database (www.oehelp.com/WMUtil/), but which do not apply to your question.

  Steve

• I tried to open my e-mail account on the homepage of roadrunners and a message tells me that this page is not available this pad a few days ago

  I tried to open my e-mail account on the homepage of roadrunners and a message tells me that this page is not available what happened a few days ago from change

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".
  • http://KB.mozillazine.org/Error_loading_websites

• If my hard drive is replaced

  Does this mean I don't have the ability to record sounds on my computer without an external mic and also means that my video card has been compramised? Because when I save on my webcam that is not ringing and when I try to record only a sound he does more. I also used to be able to used windows movie maker and windows DVD Creator. I can no longer uses because it says something about the video card.

  If your hard drive is replaced, and the computer restored/retrieved from reputable, responsible (s) tech, it should work in all directions, as expected. However, if there are problems with the hardware or software in addition to or apart from the problem with HD, this problem or these problems will have to be diagnosed and fixed as well.

  Tom Ferguson

• Hard drive is full and I don't know why

  Hello

  The free space on my hard drive stop less and less even if I do not want to install anything on it. In fact I deleted the files and folders to try to increase the free space on the hard drive, but free space still less and less stops. I searched through the filesa and folders, etc, and there seems to be about 80 GB which is used by the hard drive that I can't find anywhere. I ran the software anti-virus and anti-spyware software that I also have a firewall running. However, the hard disc to stop continually complete with what I don't know. Any ideas?
  Darren

  Following your advice, I installed:

  WinDirStat - free
  http://WinDirStat.info/

  This allowed me to find all the files on my computer and better still highlighted the huge file that was causing the problem.

  The file at the root of the problem is a log file more 126 GB in size. He was hiding there in a folder on my hard drive that Explorer windows normal not to find / identify. The logfile at the origin of the problem was "pyagcore" and it seems if installed on your computer when you install the kiwee toolbar internet explore.

  I was able to delete the pyagcore file and then disabled and deleted the kiwee toolbar. Everything looks OK and I more 126 GB of hard disk space back.

  Cheers and thanks a lot for your kind cooperation.

• Replacing hard drive, made restoration of the factory, get the message error "installing windows could not configure windows to run on a hardware on this computer."

  OS = Windows 7

  Computer = Gateway FX6840
  Media = gateway recovery media
  Hard drive is set to AHCI in BIOS

  I started meeting with S.M.A.R.T. errors.

  I backed up my data.

  I replaced 1 TB Seagate original with a new 2 hard drive to Seagate Barracuda SATA STBD2000101. Computer is equipped also is from the factory... no additional or modified facilities.

  I tried to restore Windows 7 from the rescue of the disks created with the "Gateway Recovery Management"

  Windows copying files over, the machine restarts, it installs the devices, then it stops at the "installation program starts services" and a window opens with the message "windows Setup could not configure windows to run on a hardware on this computer.

  I can't apply the Article ID: 2466753 because the process of restoration of the plant seems not provide an option to load a driver .

  Any help would be appreciated... Gateway is only interested to collect money.  They have no interest in serving the poor suckers who buy their products (computer is 2 years old so it is out of warranty).

  Thanks for the reply.

  Fortunately, I solved the problem myself (after 19 hours of stress).
  The problem is that the recent hard disk has something different that no longer ages and makes pre-service pack 1 (SP1 solves the problem) versions of Windows 7 incompatible. My set of recovery disks have been created the day I bought the computer, which had no windows updates installed at the time.

  There is an "easy solution" on the Microsoft support site: http://support.microsoft.com/kb/2466753/en-us

  Unfortunately, their method works only if you have a Windows 7 installation disc, which does most of the people who buy computers pre-built manufacturers. Essentially, the solution is to install SP1 from a disc when don't give you the possibility to load drivers during installation, an option that the gateway recovery disks.

  So I thought that, theoretically, if I use my recovery discs to get a clean install on a hard drive that works, then use windows update to get updated (or at least to get SP1), and then make a set of NEW recovery disks (using windows backup: start > all programs > maintenance > Backup and Restore), I should be able to use these discs to install the new hard disk.

  It worked.

  So for someone else who has this same problem with new hard disks, I hope that the above is easy to understand. If not, ask someone else more savvy and show them this thread. Do not forget that at the end to create new recovery disks, it will ask you if you also want to create a 'system' repair disc. DO THIS! This is the disk that you need to start from when you are ready to install.

  Also: If your new hard drive is bigger than the one that you have created the new recovery disks, the partition on your new hard drive (once everything is installed) will be the same size as the one that you have created the records on. You will need to use a kind of editor of score for re - size. I recommend Gnome Partition Editor. http://www.gparted.org

  Burn gparted Live CD and him, resize your partition, and you're done (google for more in-depth instructions).

  Thank you, theloungelizardK, for the offer on the ISO, but I don't need. :)

  Eastan - ITF

• Installation of Vista on the new hard drive was interrupted, and now I can not start the computer

  So I decided that I need a bigger hard drive. I got a 500 GB hard drive, so I have it PLOPPED in my Acer Aspire 5517 with my vista boot drive, turned on and began to go through the process. Once he got to the phase 'installation complete' it seems to take a while, so I let it run all night. Once I got up, it was on a black screen with the mouse, I let stand a few more minutes but still nothing. I turned off and started it expects to find to return at the beginning of the installation, but instead he began to start from what is on the hard drive at this time. It got to the screen with the loading bar and the sign 'Microsoft Corporation'. The loading bar was very frigidity and stopped and started randomly. I let it do this while I went to school, but when I got home, it was always the same loading screen. I rebooted and tried to start in safe mode, but when I do it it stops at crcdisk.sys, and never forwarded charges. I tried to do the reset thing factory start it but that doesn't seem to work. My other puny hard drive still works, but the other does not. I searched the internet but have not seen any other problem like it. I want to just start completely clean of my new 500 GB. Please help!

  Hi James,

  1. What is the number of brand and model of the hard disk of 500 GB?

  2. How did the 500 GB hard drive connected to the computer? It is external or internal?

  To troubleshoot the unable to start the issue to cause corrupted driver, some files that can not be loaded during the startup process must be fixed or restored. So, let's check the disk by using the Windows Recovery Console.

  (a) put the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD ".

  (c) select a language, a time, a currency and a keyboard or another input method, and then click Next.

  (d) click on repair your computer.

  (e) (click on the operating system you want to repair), and then click Next.

  (f) in the System Recovery Options dialog box, click command prompt. Type chkdsk c:/f to try to correct the errors.

  (g) Note: answer them when chkdsk asks you if you want to check the disk next boot Vista

  (h) after the recording of the disc, and then run sfc/scannow to check the corruption of system files.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Check out TechNet help links and check if that helps:

  The computer starts stops at crcdisk.sys

  Help! Vista won't start... (crcdisk.sys)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Computer failure, hard drive readable: can not find the 5 Lightroom Catalog.

  Computer failure, hard drive readable: can not find the 5 Lightroom Catalog. Help appreciated.

  I used 5.3 LR on Win7, never pay attention in the name of the catalog used. My photo files were on the same physical hard disk D: partition.

  Now that I have a new computer Intel NUC, with Win7 installed on drive C: (SSD M.2), I plugged my old drive hard drive E: (old C :) and drive F (old d :))

  I have re-installed LR 5.3 and also upgraded to LR 6, , but the problem is that I can't find the catalog I was using with LR 5.3

  I searched for *.lrcat and see all previous catalogues lightroom starting with LR 2, 3, 4, 5, getting bigger and bigger, but not catalog 5 including the current date.

  The catalog would have another name or extension?

  I have the old C: drive. Is there a config file that would confirm where the catalogue is supposed to be?

  Help!

  HM, it is clear that it is not found on your old C: (so E :). )

  And there is no config file to tell where to find the catalog to Lightroom. It's just that the catalog is in the place you choose (most of the people chose to have the catalog to the location by default...).

• computer laptop 15r-005tx: memory (ram) and storage (hard drive or replace it with SSD) upgrade.

  friends pls I mean is possible to upgrade my laptop hp computer 005tx-15r laptop memory (ram)

  edd609 wrote:
  friends pls I mean is possible to upgrade my laptop hp computer 005tx-15r laptop memory (ram)

  Hello

  Below are the specifications of your computer:

  http://support.HP.com/au-en/document/c04337709

  1. for the RAM:

  housing for module customer accessible/upgradable memory 1 or 2 (depending on model)
  2 slots: DDR3L - 1600 MHz Dual Channel Support (Core processors)
  1 location: DDR3 1333 MHz Dual Channel Support (DDR3L-1600 demoted to the)(Bay Trail processors) DDR3-1333
  1 location: DDR3 1333 MHz Dual Channel Support (DDR3L-1600 demoted to the DDR3-1066)(Bay Trail processors)
  Supports dual-channel memory
  Supports up to 16 GB of RAM in the following configurations:
  ● 16384 MB total system memory (8192 × 2) or (4096 × 2) (No 32-bit OS or Windows 7 Home)
  ● total system 12288 MB memory (8192 × 4096 + 1 × 1) (not for 32-bit OS or Windows 7 Home)
  ● 8192 MB total system memory (8192 × 1.) or (4096 × (2) No 32-bit operating system)
  System memory total 6144 MB (4096 × 1 + 2 048 × 1) ● (not 32-bit operating system)
  ● System total of 4096 MB memory (4096 × 1.) or (2048 x 2)
  ● total 2048 MB system memory (2 048 × 1).

  (Your machine uses 1.7 GHz Intel Core i3-4010U with Intel HD Graphics 4400 so it has 2 slots). Please use the manual next (page 76) to the part number het to buy good RAM. The manual also shows you how add/replace RAM

  http://h10032.www1.HP.com/CTG/manual/c04409502.ppdf

  2 SSD:

  Yes, you can replace the current drive with a good brand, standard SSD for laptops and hardware wise, please use the #59 manual page to replace the HARD drive.

  The fast and easiest way is to buy with at least 512 GB SSDS, clone the SSD HARD drive and install in Bay HARD drive as shown on the #59 page.

  Kind regards.

• I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  Hello

  You will need to reverse the clean boot, as it is either incidental compared to
  the real cause of the problem. What, where you try to fix initially using the cleanboot?

  You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
  The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
  Right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions. You
  will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - enter a bracket )
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.