My computer tells me someone shares my ip address what do I do?
my computer tells me someone shares my ip address what do I do?
Check this previous answer:
Tags: Windows
Similar Questions
-
How to tell if someone uses remote adjustment to control the use of my computer?
How to tell if someone uses remote adjustment to control the use of my computer?
* original title - monitoring computer use *.
Hello
Why do you think that someone is watching your computer use? One would have to have
loaded tracking software (trojan) on your computer or have access to the source of the network
you use, such as cable, on your leg of it and have very sophisticated equipment.If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be harder to detect as
the cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGERun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
=======================================
For extreme cases:
This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
uses aggressive methods to detect these threats, there is a risk that it can select some
legitimate programs for removal. You should use this tool very carefully and only after
you have exhausted other options.
http://us.Norton.com/support/DIY/index.jsp================================
If you are in North America, you can call 866-727-2338 to get infections of virus and spyware. Seehttp://www.microsoft.com/protect/support/default.mspx for more details. For international information, check your subsidiary local Support site.
I hope this helps.
-
I bought PhotoShop Elements 11 several years ago, I have the serial number, trying to download to my new computer. Can someone tell me where I get the download file?
-
My printer no longer works the computer tells me an unknown error has occurred, can you help me understand?
Hello
· try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer
http://support.Microsoft.com/GP/printing_problems
Read the information above from Microsoft about fixing printer problems.
·
You can also track information to try to solve your problems of printer below
read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
and read this microsoft tutorial too
Introduction
This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.
How to use this tutorial
For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
-
My computer tells me I have insufficient disk space
Hello:
My computer tells me that I have a low disk space he came when I was with my registry cleaner. I did a hard drive defragmentation. My space
information are:
I have virtual memory - 2.00 GB
Available virtual MEMOR - 1.95 GB
Spacing - 2.46 GB pagefile
Total physical memory - 1 024 MB
Available physical memory - 475,51 MB
Does this mean I have to buy more memory? I don't know anything about this stuff and can someone help me? In addition, I would like to use
Fix it program on Microsoft, but he tells me that he is not available for my computer. Please help me someone. Thank you very much!
Hello:
My computer tells me that I have a low disk space he came when I was with my registry cleaner. I did a hard drive defragmentation. My space
information are:
I have virtual memory - 2.00 GB
Available virtual MEMOR - 1.95 GB
Spacing - 2.46 GB pagefile
Total physical memory - 1 024 MB
Available physical memory - 475,51 MB
Does this mean I have to buy more memory? I don't know anything about this stuff and can someone help me? In addition, I would like to use
Fix it program on Microsoft, but he tells me that he is not available for my computer. Please help me someone. Thank you very much!
First of all, please note that you are confusing memory with disk space. The term 'memory' is used to designate the place where the computer contains the program and data, that it is working with at the moment. It is normally a memory (RAM), but which can be extended with the page or swap hard disk file. The word 'memory' is never used to refer to the space on a drive (if it is a hard drive, floppy disk, CD, DVD or thumb drive). Space on a hard disk is normally called "storage" or simply "disk space".
Call for 'memory' disk space is not so wrong that just unconventional. In a sense, the disk space is, of course, memory, but the important thing to realize is that the word is never used in this way, and if you do, you do so at the risk of seriously confuse your audience.
So, since you get a "low disk space" message , please tell us what is your hard drive, how it it used and how much is free.
Second, do * not * run a registry cleaner! Registry cleaning programs are * all * snake oil. The registry cleaning is not necessary and dangerous. Let alone register and do not use any registry cleaner. Despite what many people think, and what software record cleaning providers are trying to you convince to have used the registry entries is not really make you hurt.
The risk of a serious problem caused by a registry cleaner by mistake delete an entry you need is much greater than any potential benefit it may have.
Read http://www.edbott.com/weblog/archives/000643.html
and http://aumha.net/viewtopic.php?t=28099
Let me stress that neither me nor anyone else who warns against the use of registry cleaners has never said that they always cause problems. If they have always caused problems, they would disappear from the market almost immediately. Many people have used a registry cleaner and never had a problem with it.
The problem with a registry cleaner is that it carries with it the essential * risk * to have a problem. And since there is no advantage to using a registry cleaner, running the risk is a very bad deal.
-
How to tell if someone uses my count at home when I'm not home?
Original title: who was on my computer.
Probably a stupid question, but I've never had to ask before. How to tell if someone uses my count at home when I'm not home?
You can examine (eventwvr.exe) Event Viewer system log. He recorded each logon.
-
My computer tells me that I need administrator rights, how can I get these
original title: problemsmy computer tells me I have no privilege of administrater how to fix this.thank you marilyn
First of all, to know if your computer have added additional users. If it has sign out and log in users. If your computer is the only user whenever you want to add or remove programs, simply right click there you will see a right to delete/modify administrator software.
-
Computer tells me to "activate printer" HP Photosmart D110
Original title: HP Photosmart D110
Have been using HP Photosmart D110 with no problems. Now cannot get computer and printer to talk. Diagnosis on the printer show it all that it is in working condition. Computer tells me to "turn on the printer,' when it's already... what to do next?
Hello
- What operating system do you use?
Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.
Method 1:
Follow the steps in troubleshooting section and check if that helps.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Method 2:
Follow the steps in troubleshooting from the link and check if that helps.
The message "turn Power Off then on" display of the error on the control panel of the product.
For further assistance contact the HP support.
-
Whenever I start my computer it will boot repair and that's what he tells me "c2 error checking settings = 0x7, ox110b, 0x0, oxb029a.»
All this began after Microsoft security essentials did an update in February.
Hello
Method 1
I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem still persists. To see how to the SFC Scan click on the link below and follow the steps in the Kb article.
http://support.Microsoft.com/kb/929833
Method 2:
I suggest you perform the disk check and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
hope this helps,
-
my computer tells me it cannot find confisxml in big fish game Manager and that he cannot find servers
Hello Shirley,
Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Big Fish Games and would be better suited to support community. Please visit them on their site to find a community that will provide the support you want.
JohnD
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
My computer tells me to close case on use. He needs more space to run the fix
Original title: pc running slow
my computer tells me to stop because most use when only watch ebay and tried to config presario reader yet, it won't because he needs more than space available to run the fix n Please help me
Please tell how you have in your system ram.
Just change some settings wouldn't be much help, in fact, it will take effect, which does nothing. !!!You have a lot of disorder of the system and the multiplicity of unnecessary services that run in the background which creates this delay! To resolve this, use a software utility as a mechanic system optimizer advanced system, spotmau powersuite, etc.. To get the best study on the software, then go to.Download the trial of the product (taken from the official website of the product) that you like seeing the results from the link given above! type the name of products on google and download the free trial version of this software. In these programs, you will find many tools, but you should try turbo boost or disable unnecessary services or any other found in the utility programs that benefits you.I use the professional mechanic system and disable unnecessary services tool use that eliminates unnecessary programs and free memoryBy reducing the startup program will boost your system startup... -
When I turn on my computer, on the start page of the sign, the computer tells me in one or two boxes that a duplicate name exists on the computer. Sometimes, when I'm working on the computer on the bottom right a yellow shield stands up and says that a duplicate name exists. When I click on it. He just disappears. I don't know how to solve this problem. my computer started running real slow at the start of this problem. I don't know not one of my kids did something, but they claim that they have not, please help me solve this problem
Although you probably solved this problem, the simple solution would be to rename you the computer.
-
my computer tells me that (this file does not have a program associated with to perform this action.create an association in the Panel options files) when I try to click on a link
Hi rayperkin,-You are trying to open this link from a Web site or is it an application?Follow the steps listed in the article given below to resolve this issue: -
If my disk defragmentation has been stopped and the computer tells me to check the log events for more details how can I do my accessible Defragmenter again?
Hello1. have you made changes on the computer recently?
Method 1.
Type these commands in the start menu, run a dialog box:
Here's how:
a. Click Start.
b. in the run box, type the following commands one by one and press to enter.regsvr32 dfrgsnap.dll
regsvr32 dfrgui.dll
Method 2.
I. to resolve this problem, follow these steps:a. Click Start, run, type % Windir%\Inf, and then click OK.
b. right-click the dfrg.inf file and then click on install.ORII. Alternatively, you can reinstall Disk Defragmenter using the following command:a. Click Start, run and type that the following command and press ENTER.Rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\dfrg.infI hope this helps. -
When I receive email that includes links my computer tells me that this operation is limited to contact my adminstrater. I am the owner of the computer
Usually, but not always, the error message indicates that there is problem by default.
Please check if your Internet Explorer, or your main browser, has all of its default...
Start > default programs > Set Your Default programs > column to the left, click Internet Explorer. He said "this program has all its defaults"?
If not, click on choose by default for this program > check on all the entries in the list > click SaveWhile you're still here, check if your e-mail program has all its faults also.
Maybe you are looking for
-
Why is there no applications that will automatically speak incoming iMessages or SMS?
For any activity that see a person check iMessage or SMS during the travel (car, bike, etc.) and the obvious fact that users don't care what laws are passed (they can and will text while driving) You would think there would be a wide variety of appli
-
Using the camera on my iMac, I recorded some videos short 'selfie' with their grandchildren and their transfer to DVD-R discs, using the function of burning of the computer. However, the discs could be played on DVD Player family. Do I need a differe
-
I have a macbook air 11 '' and my question is: is better turn it off when you don't use it or leave standby mode?
-
Satellite L300-1 year - HARD disk speed
Could you please tell me the speed of the HARD drive on this model, if it's a 5400 RPM as said of all the stores, or 4200 RPM, like Toshiba have a bad habit to use? I find it absolutely ridiculous that this information is not indicated on the page of
-
service.exe updating OR deleting of the registry
Hello everyone During my installation of LabVIEW PERIOD 2011 and Vision Run - Time 2011 SP1, I checked the box for "ask the installer for...» "(See attachment). Now I don't want to get updates and so i unchecked the search for regular update in the U