My concent is I use hp 650 with window 8, problem is system disable code (51124813)

Similar Questions

• The use of devices with Windows 8

  Hi all

  I saw many problems for people with questions about the use of Bluetooth with Windows 8 devices, especially after the upgrade.

  Take a look at this document, which covers:

  I hope that this document provides assistance.

  Good luck!

• my trusty Palm 750 (at & t) used to synchronize with Windows 7, 64-bit.

  original title: Palm Treo 750 GSM Smartphone

  Looks like my trusty Palm 750 (at & t) used to synchronize with Windows 7, 64-bit.

  It is understandable and disappointing.

  Is there any kind of emulator-type of a solution to synchronize?

  I ask because I don't have a data plan and need the cable to maintain contacts and calendar on the terminal entrances.

  Thank you

  Mike

  Hello
  
  I suggest you contact your hotline and check if it helps.
  
  http://palmsupport.org/Palm-support
   
   

• I use a PC with Windows 10 and Lightroom 6.1.1. When in the develop Module of Lightroom freezes when I try to edit the next picture after correcting the first.

  I use a PC with Windows 10 and Lightroom 6.1.1.  As soon as I want to move from a photo retouched to another in the develop Module, Lightroom freezes.  Can you help me?

  Hi Petra,

  > Try disabling the option of GPU in the Lightroom > edit > Preferences > Performance tab

  > Update your graphics card driver

  Hope this helps

  ~ Assani

• can I use 3.1 with Windows 10 Audition (which I believe is 64-bit)?

  I want to install hearing on a computer running Windows 10, it will be OK sork on a 64 bit system?

  You can get almost always old software to work with windows, but you may need to use compatibility mode to install it.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• using a pc with windows 7 pro, in the print LR 6 cc module I'm not able to find the button configuration page on the left side of the bottom of the screen, where is it?

  Running a pc with windows 7 pro, in LR 6 CC in the print module.  In the lower left corner of the screen, there is only a 'page setup' button and it heading me information of "printer setup".   Must have 2 buttons in the lower left corner of the screen... "the installation and configuration of printing the page program" cannot access information 'page layout'... need some help here.

  Tom Glendenning

  < < edited by moderator > >

  Under Windows, there is only one button.

  It's Mac OS which has 2 buttons.

  What exactly do you miss?

• Display screen with Windows 7 problem

  Original title: Monitor problem

  Before I explain my problem.

  First of all, let me tell you a little about myself.  I'm 73 and I am a Novice in computers and do not consider myself an expert...  I have a degree in electronics with over 40 years of experience. I've built several computers for family and friends for years.  The problem, which I'll explain you completely confused me.

  I have a 24 "I-Inc monitor that I bought in 2008.  It has a nice clear image that never changed.  Best deal I've ever done in the monitors.  This monitor is connected to my computer main clocked i5 of operating system: Windows 7 Ultimate Professional Media Center 6.01.7601 Service Pack 1 (64-bit) fully updated.  Monitor is driven by video card NVIDIA GeForce 210

  Then, all of a sudden a few weeks ago the screen on the monitor began to go dark and back, dark and backward, dark and back.  The last dark anywhere among the second up to 30 seconds and the flashing would go one to five minutes.  Then stop and everything is fine.  So maybe some time later, I went to a different Web site it would start again.  Now, let me say clearly, there is nothing wrong with this monitor or my PC, which brings me to my next story.

  After fighting this monster of darkness for a few days, I decided to move it to what I call my computer of the workshop.  This computer has i3 cpu with NVIDIA GeForce 210 also in perfect condition.  This computer is also a system dual boot, AND this IS A SAME KEY PART.

  It has Ubuntu 14.04.3 md64 (my PC is 64bt) AND 10 for Windows.  This monitor is also connected with a HDMI cable and when I plugged it in this workshop cpu, I first booted to Ubuntu.  Everything was great for about a minute then the monster of darkness began her dance for about two minutes then stopped and the screen image was perfect.  I flipped around for a while, then the monster of darkness happens again.

  OK, so I decided to stop and start Windows 10.  You may not believe this, but with 10 Windows, IT IS No. MONSTER of DARKNESS... PERIOD!  Still, it is still connected to my cp Studio win 10, and I'm interested in what I type and the image is perfect.

  My conclusions: nothing wrong with the monitor that is always connected to the cp workshop and work perfect.

  All is well with all of my equipment in each system.  I use my monitor backup on my main system and all is well.

  Issues related to the:

  Why this monitor would work to win 10 and not in Win 7, where he worked once for years?

  Hello

  Please provide detailed information on this issue. I apologize for the inconvenience caused to you.

  Sometimes we can deal with this issue because of the incompatibility between the display with your operating system drivers. It is important to update the computer and drivers also requires the update. I understand that you have tried to solve the problem and it fixed with Windows 10. This could be due to the compatibility of the display adapter.

  In the future, if you have questions related to Windows, please do not hesitate to write us and we will be happy to help you.

  _______________

  Thank you best regards &,.

  Isha Soni

• Printer HP deskjet 6940 with Windows 7 problem

  I have a HP Deskjet 6940 printer that doesn't work with my Windows 7. This can be corrected?

  Hello

  You will have to install the software of the printer that is compatible with Windows 7.

  Go here - http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=468003&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=468001 and choose the version of Windows 7 you have.

  Once you have done this, you should see the instructions and be able to get the software needed for your Deskjet 6940.

  Let me know how you go.

  Good luck and enjoy Windows 7
  Jon

  If this message was useful and allowed, please consider the vote and it offers as a response...

  My Blog - www.insidetheregistry.com

• Activation with Windows Ultimate problem

  I have a new job, but wanted to keep exclusively for development.  So I discovered that RDP with multiple monitors does not work with Windows 7 Pro, only Windows 7 Ultimate/Enterprise.  I have an active subscription to CARDS that gives me at least a Windows Ultimate license.  I have RDP'd in the new workstation to perform an upgrade of Windows.  I entered the license key of CARDS, but the process completes successfully.

  So, I switched gears and decided to upgrade the old machine to Windows 7 Ultimate using the same process, but connected directly (no RDP).  It works beautifully.

  * PROBLEM * now my new machine requires activation, and it won't work with Windows 7 Pro license. In my opinion, he thinks that he himself has upgraded to Windows 7 Ultimate.  How can I fix it. I'm happy to have the new machine to stay in Windows 7 Pro, because I can now remote in the old machine using all four of my monitors.  How long before my new Dell expensive workstation is reduced to be a boat anchor?

  TIA,

  Miles

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Home premium to proffesional with windows anytime problems

  Hi I just bought a new laptop about 3 hours ago

  The first thing ive tried to do is upgrade from windows 7 Home premium to professional using windows anytime. The process has failed and I had several attempts by running again by using the product key that sent me an email but the error message indicates that the key does not work with windows at any time and that I should try another can anyone suggest what I need to do?

  OK now I feel silly I shut down the computer and he started to install proffessional was on when he started upward. even after all the messages saying it had not worked. very strange but at least his work

• 100% Windows 8 using the drive and Windows Update problem

  I'm going to completely horrible with windows 8.  I use the computer for two reasons

  1.) to run a machine virtual linux which performs calculations for my work

  (2.) to run a very small application that connects to another computer and updates a display based on what is sent to it.  This application also shuts down the computer when the network computer told him to.

  The computer is not connected to the internet, so I chose not to do the windows updates (in Control Panel, never check, do not update, etc...), now that I have a set of drivers that work well.  Took me to update to the latest version of windows 8 (not 8.1), so that the service representative would talk to me, and the problem is more serious.

  I also disabled windows update service.

  Also, after startup, svchost.exe takes 100% of the use of the disc for anywhere from 1 minute to 3 hours.  It is usually about 5 minutes, but takes more time after an update.  I reinstalled windows many times, and the problem persists.  When no other applications running, 10 minutes after the start, opening of windows Explorer takes about a minute.  This computer has a disk decently fast (I tried to replace), a processor quad core and 16 GB of RAM.  When running normally, it is extremely fast.

  My problem is that when I'm at work, a team of 20 or so programmers and engineers may have to wait up to 3 hours for the use of the disc down before you start to work because Windows 8 is unable to work properly.  How can I get rid of this?

  I am considering really just to start the linux and rewrite of the application image bit will run in windows, but I don't want the headache of Active Directory on linux.

  http://social.technet.Microsoft.com/search/en-us?query=Windows%208%20%26%20linux%20virtual%20machine&AC=5

  Try this link for windows 8 & virtual machine. Also, if it's a pc intel based,.

  go to intel.com/support/software/drivers,locate the update utility intel that

  will scan the pc for auto drivers/software.

  Even with the new CD of the OS, you must always configure the hardware on the pc for

  the operating system, most of the cds do not understand that. No windows OS takes also, that

  long to make it ready for the tasks, no more than 10 minutes without

  Progress, stop the execution of its tasks, its in an "open loop"...

• Performance on a Satellite Pro A120-185 with Windows Vista problems

  Can someone help me with this.
  My laptop is a new Satellite Pro A120-185 with Windows Vista.

  I had my last configuration less portable, but you know what? He was faster!

  I'm supposed to have cetrino duo 2, 2 GHz and cach of 4 MB, FSB 667 MHz, RAM 1 GB, even though they are at 533 MHz, 100 GB 5400 RPM HARD drive / MIN.

  It is slow, not only starting, programs opening, plays something, the browser and even to copy from the CD to the hard drive sometimes give me time 4 days left!

  Clicking on something takes forever. What's wrong?
  Need less to say that with vista no and I mean none, of my devices are busy. Dongle Bluetooth, USB disk, printer, NAS, and and...

  Hey dude,

  Please don t forget that Vista has been installed on your laptop and the additional tools of Toshiba and the utilities that control many additional features!
  There is a huge difference between Vista and early Microsoft operating systems.

  The Vista eat computer resources and many devices old don t work or cannot be installed because the 3rd device manufacturers don t provide Vista drivers!

  In my opinion an upgrade to 2 GB ram would increases the performance of laptop.
  All programs and utilities could be loaded more quickly

• Satellite L40 - F14 with Windows XP - seeing WiFi is disabled

  Hello!

  I have satellite L40 - F14 with Windows XP Home SP2 - and everything works fine.
  But there is a little problem with indicator LED WiFi - WiFi works normally.
  connection with router and... This LED turns OFF. It is not big problem,
  but I like, if everything works well :)

  Now I have the latest version of the driver installed (from 29.11.2007)---> http://support.toshiba-tro.de/tedd-files2/0/drvpack-en-20071119132412.zip.

  Can you give me link to correct functioning driver WiFi for Satellite L40 - F14 or answer where is the problem?

  Help me please :)

  st_man

  *_@st_man1_*
  Have you checked if the WLan switch on the side of the laptop is on? This switch activates and deactivates the WLan led. If this is not enough, I guess that there is a hardware problem. Perhaps some loose contacts, for example.
  This can be corrected with any software update, I think that the technician should take a look in the notebook and should check this

  _*@chris4o*_
  First of all it s very strange that your laptop has not delivered with any Windows operating system! Each new Toshiba notebook was shipped with the Windows operating system and the image of Toshiba should be already preinstalled.
  In addition, you should find the Toshiba Recovery CD in the package. This CD contains all the drivers Toshiba, tools, Windows OS and additional software!

  With regard to the pixel dead;
  Usually the internal laptop display can be replaced if a large amount of dead pixels would be displayed on the screen. There is an exactly information about replacing the screen.

  Please check this:
  http://support.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm

  In any case, I recommend you really clarify this two issues from your laptop dealer! The laptop must have the OS!

• Install Ubuntu with Windows 10 problems.

  Hello

  I had problems trying to install Ubuntu with Windows 10 (and Linux Mint also has problems). When I try to mount my hard drive (with 10 Windows on it), it says that Windows is put into hibernation. I want to install Ubuntu with Windows and not to clean install. Ubuntu detects my external hard drive and said: «There are currently no operating system installed...» ', but it does not detect my hard drive with Windows 10 on it.

  Thanks for any help,

  DaComputer Guy

  Sometimes, when the quick start is activated, it can cause Linux to correctly identify the Windows partition as being in the State of hibernation. Try to disable the quick start and see if it solves the problem:

  1. open the Control Paneland turn the mode icons

  2. in the list, go to Power Options

  3. in the left pane, click choose the power buttons what

  4. scroll down and uncheck the Quick start

  

• Display LCD with Windows 7 problem

  Since I installed Windows 7, my LCD seems 'shift' from time to time so that all graphics, icons, etc. are blurred, looking as if half of the image is moved to the right or the left.

  I tried to run video, and other display settings of bugs on my card and no problems are detected.

  What else could be?

  Try:

  -map updated graphics drivers and the monitor to the latest Windows 7 of those.

  -Search in the manual of your monitor and find its native resolution and refresh rate (for example, 1920 x 1080 at 60 Hz). Try these settings.

  -Check that the video cable is plugged at both ends.

  -a different video cable.

  -check that the graphics card has been inserted in its housing.

  If you post back please provide the following information. :

  -graphics card brand & model

  -monitor & model making

  -used video connection type (e.g., DVI, HDMI, VGA)

  -The version of Windows you are using (e.g. Windows 7 Home Premium 32 - Bit).

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.