Install Ubuntu with Windows 10 problems.

Similar Questions

• Impossible to install ubuntu with windows 8 double trunk

  I have lenovo laptop g500s with windows 8 pre installed. I couldn't install ubuntu (linux) alongside win 8. When I tried to dual boot, this laptop with ubuntu victory 8 boot manager was corrupted.can someone suggest me how to install ubuntu with windows 8.

  Hello Samyajith,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the exact error message or code when you say, 'victory 8 boot manager has been corrupted?

  I appreciate your efforts to resolve the issue.

  Please refer to the suggestions for aufa35 replied on 6 January 2014 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/dual-boot-Windows-8-and-Ubuntu/cce29abd-4190-4e9d-87E3-33b7fb640569

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If this does not help, then I would recommend you post the question on the Ubuntu forums.

  Ubuntu community forums
  http://community.Ubuntu.com/contribute/support/Ubuntu-forums/

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Install Ubuntu with Windows 7

  I have a laptop HP Compaq Presario CQ56-112SA which has WIndows 7 Home Edition OS. I want to install Ubuntu 12.04 OS on its own partition to dual boot with Windows. However, my understanding is that the laptop has 4 primary partitions on the HARD disk that are already being used and so no more partitions can be made. I can reduce the 'C' partition to make space, but I understand that I must also release an entire partition. I know I can install Ubuntu 'Inside' Windows, but I'd rather not.

  Some participants say you can remove safely HP-tools to provide a partition for Ubuntu, but others advise not because HP-Tools contains a kit of the BIOS recovery, say, is indispensable.

  I would be very grateful for the opinions of experienced editors which I most decidedly am not.

  Hello gordon99,

  I see you are trying to install Ubuntu on your laptop. To do this, I would like to direct you to this document: frequently asked Questions on Linux (FAQ) for all your questions regarding this.

  Thanks for posting on the HP Forums.

• Install Ubuntu with Win 7

  I downloaded Ubuntu 14.10 (32-bit edition) and I want to install it without uninstalling my Windows 7. The installation gave me 2 options, it is to install Ubuntu with Windows 7, is second to install in a specific partition. My question is can I install Ubuntu in the 3rd partition of my hard drive without affecting Windows 7 that is installed in the first partition? Thank you.

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  Ubuntu can be installed after Windows has already been installed. You can see the article below.

  https://help.Ubuntu.com/community/WindowsDualBoot

  Alternatively, you can use "Wubi" install Ubuntu in Windows 7.

  You can check: https://help.ubuntu.com/community/Wubi

  In addition, you can install Ubuntu on a separate partition. However, if you want to learn more about the process, I would ask contact you support Ubuntu.

  Ubuntu - contact us

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Failure of dual booting Ubuntu with Windows 8 on the Satellite P845t

  I tried in vain to dual boot Ubuntu 13.10 to a new Satellite from Toshiba with Windows 8.1. The laptop has UEFI. I used the two live DVD and live USB, and I tried with SecureBoot both active and disabled.

  Whenever I have the same failure. J
  UST before the next GRUB, the error message screen appears flashes briefly on the screen "error: variable 'root' is not defined". The GRUB screen appears. I tried Trying-out Installation and Installation and whenever once I have selected one of these options, then, the screen turns off and remains empty. When you use a DVD, the DVD still Purring for several seconds, before going to death.

  Out of curiosity I tried to install OpenSUSE 12.3 in the same way (with SecureBoot both enabled and disabled in turn, etc.) and stalls from installation to a similar point every time, which leads me to think that it is something to do with how UEFI is installed on the laptop.

  The laptop is a Toshiba Satellite P845T about 3 months with the HARD drive replaced with a SSD.
  It came with pre-installed Windows 8, and I've upgraded to 8.1 Windows last week, shortly before trying to install Ubuntu.

  Curiously, the Windows desktop 8.1 has a watermark in the bottom right that says: "SecureBoot is not configured correctly", but that may not be not relevant for this query, such as Google search, that suggests that many people have this watermark even if SecureBoot is properly configured. And activating/deactivating the SecureBoot makes no difference for the message.

  Any help would be welcome, as I'd like to get this double-started with Ubuntu.

  Thank you!

  Hello

  Can you tell me if you tried to start a direct media from a USB?
  If YES - which was / is the result?

  BTW - I guess that's your feed:

  http://UbuntuForums.org/showthread.php?t=2184839

  BR

  Tom

  Post edited by: MannerhagenVPO

• wireless network with windows vista problems

  My laptop has windows vista edition family service pack 1. It does not connect to my router thomson TG585 v7 gateway. Ive tried everything nothing helped. I've heard this may be a compatibility problem with windows vista and there may be an available for this patch. Is this correct and how I could get it?

  You have a power switch Wireless switch on your laptop?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Display screen with Windows 7 problem

  Original title: Monitor problem

  Before I explain my problem.

  First of all, let me tell you a little about myself.  I'm 73 and I am a Novice in computers and do not consider myself an expert...  I have a degree in electronics with over 40 years of experience. I've built several computers for family and friends for years.  The problem, which I'll explain you completely confused me.

  I have a 24 "I-Inc monitor that I bought in 2008.  It has a nice clear image that never changed.  Best deal I've ever done in the monitors.  This monitor is connected to my computer main clocked i5 of operating system: Windows 7 Ultimate Professional Media Center 6.01.7601 Service Pack 1 (64-bit) fully updated.  Monitor is driven by video card NVIDIA GeForce 210

  Then, all of a sudden a few weeks ago the screen on the monitor began to go dark and back, dark and backward, dark and back.  The last dark anywhere among the second up to 30 seconds and the flashing would go one to five minutes.  Then stop and everything is fine.  So maybe some time later, I went to a different Web site it would start again.  Now, let me say clearly, there is nothing wrong with this monitor or my PC, which brings me to my next story.

  After fighting this monster of darkness for a few days, I decided to move it to what I call my computer of the workshop.  This computer has i3 cpu with NVIDIA GeForce 210 also in perfect condition.  This computer is also a system dual boot, AND this IS A SAME KEY PART.

  It has Ubuntu 14.04.3 md64 (my PC is 64bt) AND 10 for Windows.  This monitor is also connected with a HDMI cable and when I plugged it in this workshop cpu, I first booted to Ubuntu.  Everything was great for about a minute then the monster of darkness began her dance for about two minutes then stopped and the screen image was perfect.  I flipped around for a while, then the monster of darkness happens again.

  OK, so I decided to stop and start Windows 10.  You may not believe this, but with 10 Windows, IT IS No. MONSTER of DARKNESS... PERIOD!  Still, it is still connected to my cp Studio win 10, and I'm interested in what I type and the image is perfect.

  My conclusions: nothing wrong with the monitor that is always connected to the cp workshop and work perfect.

  All is well with all of my equipment in each system.  I use my monitor backup on my main system and all is well.

  Issues related to the:

  Why this monitor would work to win 10 and not in Win 7, where he worked once for years?

  Hello

  Please provide detailed information on this issue. I apologize for the inconvenience caused to you.

  Sometimes we can deal with this issue because of the incompatibility between the display with your operating system drivers. It is important to update the computer and drivers also requires the update. I understand that you have tried to solve the problem and it fixed with Windows 10. This could be due to the compatibility of the display adapter.

  In the future, if you have questions related to Windows, please do not hesitate to write us and we will be happy to help you.

  _______________

  Thank you best regards &,.

  Isha Soni

• Performance on a Satellite Pro A120-185 with Windows Vista problems

  Can someone help me with this.
  My laptop is a new Satellite Pro A120-185 with Windows Vista.

  I had my last configuration less portable, but you know what? He was faster!

  I'm supposed to have cetrino duo 2, 2 GHz and cach of 4 MB, FSB 667 MHz, RAM 1 GB, even though they are at 533 MHz, 100 GB 5400 RPM HARD drive / MIN.

  It is slow, not only starting, programs opening, plays something, the browser and even to copy from the CD to the hard drive sometimes give me time 4 days left!

  Clicking on something takes forever. What's wrong?
  Need less to say that with vista no and I mean none, of my devices are busy. Dongle Bluetooth, USB disk, printer, NAS, and and...

  Hey dude,

  Please don t forget that Vista has been installed on your laptop and the additional tools of Toshiba and the utilities that control many additional features!
  There is a huge difference between Vista and early Microsoft operating systems.

  The Vista eat computer resources and many devices old don t work or cannot be installed because the 3rd device manufacturers don t provide Vista drivers!

  In my opinion an upgrade to 2 GB ram would increases the performance of laptop.
  All programs and utilities could be loaded more quickly

• Recovery and re-install Windows7 after windows 7 problem

  Hi, I have a damaged hard drive windows 7, with some bad sectors. I managed to install linux with an external HD and now I can see the files on my old hard drive. Does anyone know if I can make a recovery disk manually now. and if so how? And what should I do to re - install windows 7. I don't want to buy the operating system and manufacturing wants me to pay $ 60, which I believe is not fair.

  Thank you

  Buna,

  Your question is about Windows 7 NOT Vista, which is where dhhuang re-directed you to!

  To find out how the recovery disc and see if you can make them even though you'll have to see if this information is a manual that came with your computer or watch online Web site to computer manufacturers for this information.

  You can also send or you can call for this information.

  These are the people to ask about this.

  Here is the CORRECT Windows 7 Forum for you if you still need them.

  Install Windows 7 upgrade and activate

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

  Windows 7 system repair and recovery

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system?page=1&tab=all

  Revedere.

• Cannot install printer with Windows 8.1

  I have a new laptop with Windows 8.1 and when I tried to install my HP Deskjet F24100, he said that the operating system was wrong (or words to that effect!) I then looked on the installation CD that says that it is for Windows 2000, XP, Vista. Now should I chuck a really reliable printer in perfect working condition and get a new one or is it possible to "revaluation" so I can install it? Thank you

  Hello

  Sorry, I can't find F2410 not0 but I can find F2410 not and it is on the following list:

  http://support.HP.com/us-en/document/c03168175

  If it's F2410 not, please download the following package and install on your computer Windows 8.1:

  http://ftp.HP.com/pub/softlib/software12/COL29199/al-109119-1/DJ_AIO_06_F2400_NonNet_Full_Win_WW_140_404.exe

  Kind regards.

• Printer HP deskjet 6940 with Windows 7 problem

  I have a HP Deskjet 6940 printer that doesn't work with my Windows 7. This can be corrected?

  Hello

  You will have to install the software of the printer that is compatible with Windows 7.

  Go here - http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=468003&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=468001 and choose the version of Windows 7 you have.

  Once you have done this, you should see the instructions and be able to get the software needed for your Deskjet 6940.

  Let me know how you go.

  Good luck and enjoy Windows 7
  Jon

  If this message was useful and allowed, please consider the vote and it offers as a response...

  My Blog - www.insidetheregistry.com

• Activation with Windows Ultimate problem

  I have a new job, but wanted to keep exclusively for development.  So I discovered that RDP with multiple monitors does not work with Windows 7 Pro, only Windows 7 Ultimate/Enterprise.  I have an active subscription to CARDS that gives me at least a Windows Ultimate license.  I have RDP'd in the new workstation to perform an upgrade of Windows.  I entered the license key of CARDS, but the process completes successfully.

  So, I switched gears and decided to upgrade the old machine to Windows 7 Ultimate using the same process, but connected directly (no RDP).  It works beautifully.

  * PROBLEM * now my new machine requires activation, and it won't work with Windows 7 Pro license. In my opinion, he thinks that he himself has upgraded to Windows 7 Ultimate.  How can I fix it. I'm happy to have the new machine to stay in Windows 7 Pro, because I can now remote in the old machine using all four of my monitors.  How long before my new Dell expensive workstation is reduced to be a boat anchor?

  TIA,

  Miles

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Touch screen with window 7 problems

  The touch screen does not work on the PC.  It was working and just stopped one day after an update.  I have WIndows 7 Professional.  I had the PC for about a year.  He worked until about 3 weeks ago.  I went to control panel or device and looked at the Hardware\pen and he's not here.  It was there, but not know and it's on the other PC with windows 7 Professional that I have.

  The touch screen does not work on the PC.  It was working and just stopped one day after an update.  I have Windows 7 Professional.  I had the PC for about a year.  He worked until about 3 weeks ago.  I went to control panel or device and looked at the Hardware\pen and he's not here.  It was there, but not know and it's on the other PC with windows 7 Professional that I have.

  Download and install the drivers from the manufacturer of the component/system devices.  Material is supported by its manufacturer - including all the drivers and other software.

• Home premium to proffesional with windows anytime problems

  Hi I just bought a new laptop about 3 hours ago

  The first thing ive tried to do is upgrade from windows 7 Home premium to professional using windows anytime. The process has failed and I had several attempts by running again by using the product key that sent me an email but the error message indicates that the key does not work with windows at any time and that I should try another can anyone suggest what I need to do?

  OK now I feel silly I shut down the computer and he started to install proffessional was on when he started upward. even after all the messages saying it had not worked. very strange but at least his work

• Printer/Scanner with Windows 7 problems

  I recently bought a new computer with Windows 7.  I have a HP Deskjet 5650 printer and Windows 7 does not detect.  I have a HP Scanjet 5370C scanner.  Windows 7 detects it, but tells me that there is no driver for it.  I searched for driver downloads, but apparently it is not a driver for the printer or scanner.  Can someone tell me how to solve problems - other than buying a new printer and scanner?

  Re the 5650...

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01874725&LC=en&DLC=en&cc=us&product=304445

  Re the 5370C...

  There is no driver support HP, but Vuescan supports... There is a trial version...

  http://www.Hamrick.com/

  Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/