my continuous computer to go to sleep every minute I have already try the power setting but no change.

computer is hp pavilion elite e9270f Windows 7 64-bit OS

do you have a system recovery that everything is great except for thid problem

can anyone help please thanks in advance.

Have you checked to see if you have a screensaver set to 1 min? What power did you check? The one in the bios or the one on the computer?

Tags: HP Desktops

Similar Questions

  • When my computer goes into sleep mode, I have to press the power button to turn it back on.

    original title: sleep/hibernation

    When my computer goes into sleep mode, I have to press the power button to turn it back on.  I used only having to press a key on the keyboard.

    Can someone tell me how to solve this problem, as if it was before?

    Well, on the theory that your computer is awkward, try to change the settings to another thing and OK your way out the control panel.  Then go back and put them in the way they were and OK your way out.  Occasionally, it will reset the internal parameters and things can return to normal.

    HTH,
    JW

  • I have windows xp SP3 installed and every time I have shut down the computer and think that his chest away he starts back up?

    I use an ACER Am1201-B1603A 4800 + AMD Anthlon x 2 #gig ddr ram 120 GB windows xp sp3 with all updates...

    Whenever the computer is shutdown with in a few minutes, it restarts.  This is a new installation like 3 days...

    Any help would be appreciated to grealty

    Hello

    Method 1

    Refer to the article below and try the steps mentioned, check if it helps.

    Windows XP restarts when you try to shut down your computer

    http://support.Microsoft.com/kb/311806

    Method 2

    If the previous step fails then I suggest that you check to see if the problem persists in safe mode.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Method 3

    If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. Click Start , and then click run.
    2. Type msconfig , and then click OK.
      The System Configuration utility dialog box appears.
    3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
    4. When you are prompted, click restart to restart the computer.
  • When I start my computer, I connect by entering my password but the screen shows just the loading circle until I have turn off the power and turn the computer back on

    Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

    Wen I turn on, I can point to enter my password. I entered my password and the screen displays a symbol of shooting and seems to expect something to go. The mouse does not work and none of the keys work. I have WIFI in my house, but the system looks like it's waiting to connect. I waited for more than 10 minutes. The only thing I can do is press and hold the switch down for a few seconds until there is a power down. I then power back up and get my password again. I between it and the system is in place OK. It happens all the time. It all started about 2 weeks ago. I have not loaded all the apps since it worked normally. Also, if I am growing up and running and I doi a stop with a reboot, the system comes down and restarts and arrives at the passwword. Enter the password and I have hung up again.

    Hi Greg,.

    ·         Have you checked the problem in safe mode?

    ·         What version of Windows operating system is installed on the computer?

    Try the following.

    Method 1: Start the computer in safe mode and see if the problem persists. Report of the results.

    Start your computer in safe mode

    Method 2: You can run the Microsoft Safety Scanner to search for infection by the virus. Check out the following link.

    Microsoft Safety Scanner - free online tool for PC health and safety

  • I have the security shield popping up every minute I have Wndows Vista, how do I get rid of this spyware? __

    I have problems with the security shield. How can I get rid of this terrible spyware? Then take the person responsible for the exterior and open a can of woop @#.

    I have problems with the security shield. How can I get rid of this terrible spyware? Then take the person responsible for the exterior and open a can of woop @#.

    Hey mattman76

    follow the exact directions in the uninstall including Guide use rkill to stop the process beforeto use malwarebytes anti-malware

    download links are provided in the tutorial for rkill andmalwarebytes anti-malware

    http://www.bleepingcomputer.com/virus-removal/remove-security-shield

    If necessary do all the work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with Networkng option using the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    Walter, the time zone traveller

  • Help - HP Pavilion a6030.uk desktop computer. Have to press the power button several times to start?

    Hello

    I have a HP desktop computer. The model is HP Pavilion a6030.uk, Opertating system: windows vista.

    My computer has had no problems at all until yesterday for some reason, I had to push the switch several times to start until he finally turned and did normal starts. As I would press the power as normal to start button, but all of a sudden, it turns off after about 2 seconds and so I would tap on the switch several times and each time it will not start and turn off, then the power button could be pressed again until it would finally turn on and start and run as normal and seems to work correctly. And it was the same thing today, I pressed the power button mutiple times (for example 6 times) until she finally started as usual.

    Savvy/computer im not very well informed or wise in this area, please someone will help me and give me some advice/help to fix/resolve this problem.

    Thank you for taking the time to read this and any help would be appreciated for this problem.

    Thank you.

    Vonbon90, welcome to the forum.

    When I see these symptoms on an old computer, I think it may be a power supply (PSU) failure/ing.  Here's a guide that will help your troubleshooting it.

    In addition, you could test the memory.  This can be done by removing all modules of memory and replacing them one at the time and start.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • How can I fix sync error of Firefox which continues to appear every time I have to refresh the browser

    I get incorrect user name or the password. Even if I connect, I always get the message.

    Thanks for the support. Here's what I did to fix the problem:
    I followed the suggestions of Guigs. I deleted the account, but the pop-up error message is returned.
    I had to change the private mode to remember history. Then I went to security to keep the firefox account info. I changed the privacy settings customized for the search form and internal history and 3rd cookies be saved and indicate the sites I want to be the subject of a follow-up.
    If I sign in another separate account, I get the question you want to remember password and say 'no' to all the others except firefox.
    Before leaving firefox, I empty all the info with the exception of the active connections.
    I used this browser for years and have never had a problem. I really hope that they fix this in the other updates.
    I hope this helps another in need.
    Thanks again to those who responded.

  • Firefox recently began freezing every time I have (a) try to open options (b) try to download a file (c) try to export bookmarks (d) attempt to move a bookmark

    Firefox last month started to freeze every time on a Windows 7 laptop, whenever I have try one of these measures. I tried 'refresh Firefox', safe mode, uninstall/reinstall, nothing seems to help. Cannot open prefs so I have not been able to disable hardware acceleration. However, I managed to set up Firefox Sync which leave me my favorites to another PC, and looks to make configuration changes on that PC affects this copy of FF, so I < think that > I also tried to disable hardware acceleration. Nothing works. Particularly frustrating that the options freeze. Firefox worked for years on the laptop touched, I can do except give up and switch to another browser?

    I downloaded and installed the 64-bit Firefox Developer Edition (40.0a2), using Sync to get my 32-bit profile settings. Options and file downloads work, hurrah!
    --Samedi 6/6: well, only the extensions I use are Adblock Plus and Flashblock and both seem to work well. I < not > enabled the multiprocessue option.

  • Hi, my name's NiNi and every time I have support on the screen of my "home" button it maks a loud crack down and its a little hard to rely on the work from the bottom but it is still. What is strange for the iphone. Can I repair my home to apple store but

    Hi, my name's NiNi, and every time I press my button home he made a cracking noise strong down and its a little hard to press work down but still. What is strange for the iphone. Can I repair my home to apple store button and if so, how? The price will be high? IM only 13 so please be easy on me! My home button was not good compared to other iphones and its a little weird. I have an iphone 6 s, and im worried it could slow down! Help, please!

    I wanted to say break LOL

  • My computer will turn off not when I use the start menu, it is as I have not yet hit shut down. I have to press the power button to turn off.

    It happened once before and I don't remember what I had to do to fix and I can't find this post to remember.  Thank you in advance...

    Hello

    You did it all change hardware or software on your computer before this problem?

    You can follow this link & check if the problem persists:

    Windows stops responding during Windows XP shut down

    Advanced Troubleshooting for shutdown problems in Windows XP

    Hope the helps of information.

  • My computer freezes for about half a minute after that Windows puts the monitor in standby

    When I leave my computer unattended for a moment and the monitor turns off automatically, after I come back and move the mouse from the computer freezes completely for about 30 seconds, mouse, it will beep and then returns to normal. Each power saving in Power Options disabled, out of the screen turned off after 10 minutes. Also, I noticed that it is not only the monitor. If I use my computer for, say, 15 minutes, everything works fine. But if I leave it for an hour - freeze. It's a notebook based on AMD/ATI (Fujitsu Siemens AMILO Pa 3553). Any ideas?

    I've identified the cause. Concealment of Auto Start menu is causing my problem.

    You can read about it here: http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/33caf0a9-96ec-46b3-9fb3-1b3d61d52ff0

  • I have already bought the creative cloud and need to install it on a second computer

    How do we install the creative suite on a second computer?

    All you need to do is install Adobe Creative Cloud application using which you can download the CC apps.

    https://creative.Adobe.com/products/creative-cloud

    Reference:

    https://helpx.Adobe.com/creative-cloud/help/install-apps.html

  • After cleaning my computer XP, it no longer starts options screen of Eve or the power automatically, even if my setting are unchanged. Any solution?

    screensaver to go 10 minutes and in 15 to 20 minutes power options

    screensaver to go 10 minutes and in 15 to 20 minutes power options

    I fixed it by reinstalling the software of management of power from the original driver disc after disabling all programs and package of services at startup with msconfig.

  • How can I stop Windows Live Messenger issuing alerts every minutes, hours and days of the year? I don't use it.

    I do not use Windows Live Messenger, but he insists on the display of alerts telling me to connect. Why it does this and how can I stop without causing problems in other areas? I know nothing about it except that the people who try to contact me (I guess) can do it without going through channels such as email or telephone.

    I do not use Windows Live Messenger, but he insists on the display of alerts telling me to connect. Why it does this and how can I stop without causing problems in other areas? I know nothing about it except that the people who try to contact me (I guess) can do it without going through channels such as email or telephone.

    I assume you have Windows Live Messenger, because you have installed the Windows Live Essentials.
    If so, a brief explanation...
    Windows Live Essentials includes some programs that can be installed or NOT, must be installed. You can choose whoever you want.

    Now, you have 2 options...

    1. you can disable. He will remain in the system but inactive.

    2. you can purely and simply uninstall it, and it will be out of the system.

    RE: Disable Messenger
    Open MSN Messenger > at the top, click on tools > click Options > column to the left, click on Sign In > straight column, uncheck all boxes > click OK done wnhen.

    RE: Uninstall Messenger

    Start button > in the search box, type programs and features > press the Enter key. Scroll down to Windows Live Essentials > right click it > click on uninstall...
    Follow the guests but be careful to screen > it will ask you what program to uninstall. Select Windows Live Messenger. Follow the prompts.

    You can check out this tutorial:
    http://www.dkszone.NET/uninstall-remove-Windows-Live-Messenger-How-to

  • My names of files in Flash CS6 change every time I have save for the first time

    When I got Flash CS6, I worked on an animation and has called "grumpy." Now, 2 years later, whenever I'm doing a project in Flash and save it for the first time, he adds "": grumpy ' at the end of the file name. "

    For example, I'm working on a project now with the point leader name "2_1.fla segment." When I recorded it for the first time, it changed to "segment 2_1.fla*: grump.»  Adds it at the end of any project, regardless of the type (ActionScript 3.0 or 2.0).

    I have no idea why Flash is doing this, because this project is not connected to the original 'grumpy' somehow. I don't know how to remove it, either. Any help would be appreciated! Thank you!!

    reset your preferences - flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

    you could also disable AutoSave to see if that solved the problem.

Maybe you are looking for

  • Re: Processor Uprgrading a T8100 on Satellite P300

    Hello I wanted to ask whether it is possible to upgrade the processor on my p300 laptop (PSPC5A-00U00E), he is currently using a t8100 processor.If so would it be possible to find what I would look for (t8400?) so I get a lot of compatible processors

  • Z50-70 portable - some keys do not work

    So I got a laptop Lenovo Z50-70. Some of its keys work not at all, not even during startup. I had a portable dual-boot (with 16.04 Ubuntu and Windows 10) and it seems that some of these keys do not work on any of the operating systems installed. Keys

  • hardware error

    I have buyed a 15-r022tx hp note book in flipkart... I installed windows 7 and all readers but in display Device Manager device is unknown so please help

  • Master/slave event Structure vs. State Machine

    Hello First some background to the question (skip this paragraph if you are simply interested in the question). I'm relatively new to Labview, after only a few months of coding with Labview and LabVIEW Core 1. Being one of the only people in the comp

  • Module correct DAQ for Celesco SP2 or SP3 String Pots

    Hello! I am currently looking to develop the capacities of our laboratory by adding string pots in our toolkit of sensor. I came across a jar of string that will work for us, namely Celesco SP2 or SP3 (or the other). Here is the site where there are