Module correct DAQ for Celesco SP2 or SP3 String Pots

Hello! I am currently looking to develop the capacities of our laboratory by adding string pots in our toolkit of sensor. I came across a jar of string that will work for us, namely Celesco SP2 or SP3 (or the other). Here is the site where there are listed more information on these sensors:

http://www.celesco.com/stringpots/

SP2 is a divisor of output voltage. According to the Application engineer, a very clean DC voltage signal be sent to the pot of string SP2 so that it can generate specific measures, while the SP3 will take 24 V DC (less clean signal) sign and generate specific measures making the more expensive than SP2 SP3. (prefer to go with the best value option).

We currently have a cDAQ-9178 chassis. Is there an analog input module OR out there that will work with the pot of string SP2 or SP3. The hope is that this module will be connected to the cDAQ chassis and the sons of the string pot turn for this add-on.

It would be also possible to use a USB-6003 with pots of string above? Let me know and thanks for your help! I am also attaching the respective data sheets for your reference.

Since available SP3 device accuracy is 1% of full scale (0.1 Volts), I think you can use any of these materials good markets (USB-6002 or (3). You also need to consider what kind of sampling rate you need. I imagine not too high (perhaps 10 or 100 Hz is just enough)? Depends on the speed of movement you want to check with this pot spring...?

If you use the USB-6002, you get 4 differential channels and a 50 kHz sampling rate (but don't forget not, if you for example use 2 channels, your max rate will be half: 25 kHz per channel). 16-bit ADC, so that you get the resolution of the 10/2 ^ 16 = 0.15 mVolts the interval 0-10 Volts (0.0015% 10 volts). It is already an overdose compared to unit 1% F.S. accuracy.

Wiring: read the 2nd page of your pdf. You have three sons. Connect the Red (+ 24V) and black (com or the PSU GND) wire to your power supply (24VDC, like you said, use a quality like Siemens brand). You can use a single 24V DC power supply to power both of your sensors (I don't know how much power they attract, but I guess not a lot), obviously connect the power supply to the two parallel electrical sensors (so that they get the same voltage).

Connect the Green (signal 0-10 Volts of tension) and black wire your DAQ hardware (use differential pins, check the specs of the device).

Tags: NI Software

Similar Questions

  • How to get the SP2 or SP3 for Windows XP

    Searched everywhere and can not find SP2 or SP3 for Windows XP computer operating system - independent. Windows Update was never above listed.

    Any help for this old man would be appreciated.

    Thank you

    Frank

    Hi FARPAR69,

    Please see article with some useful information:

    http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Is it possible to get sp1, sp2 and sp3 for XP

    I know it's laid before, but where can I download updates SP1, SP2 and SP3 for XP.

    I have the original XP Pro install media.

    I am strongly considering to put XP Pro on a Dell PC I have has no HARD drive.

    I plan to do that because it's basically Win8.1 PUE!

    A HUGH mistake buying a machine with Win8.1!

    It is UGLY, it is INFLATED WITH CARP, it is UNDESIRABLE to the IMO.

    I have need a lot of talk of "insecurity" and any future update. I can't live without them.

    I can't the XP service packs of MS or where ever?

    CHANGE > in fact I found the s SP just now install media.

    I found the stub thing after that I downloaded.  But I found no later than SP1 stub.  But if the SP1 is not necessary, I can remove it.  Just read somewhere that, in order to get SP3 installed, I need SP1 AND SP2.

    No, to install sp3, you have sp1 OR sp2.

    Yes, the news of the "System requirements" on the download page of the sp3 are vague and misleading: "Windows XP Home Edition, Windows XP Professional Edition, Windows XP Service Pack 1, Windows XP Service Pack 2."

    Commas means 'or' - except the comma between the two editions and two service packs, which means 'and '.  The requirements must be written (XP Home or XP Pro) AND (XP sp1) or XP sp2.

    If you don't end up doing this, see the post following MS MVP PA bear first: https://groups.google.com/forum/#! msg/microsoft.public.windowsupdate/4-jCtXsbshs/HBI-0476Wj8J

  • Update for Windows XP (KB2964358), upgrade of service SP2 to SP3?

    I went on the website and tried to download the KB2964358 update), wouldn't DOWNLOAD says I need service pack 3. Where can I go to upgrade (download) service SP2 to SP3?

    I have Windows XP Home Edition Version 5.1 Service Pack 2 Internet Explorer 6.

    Last Friday, I got a virus and did a non-destructive recovery from my system. Before that, I had IE 7, anyway to extract the files from my PC?

    Hello

    The problem with viruses on the computer, I would say that you download and run a full scan of the system using the Microsoft Safety Scanner.

    Here is the link for the Microsoft Safety Scanner which is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    Note:

    Data files that are infected must be cleaned only by removing the file completely.
    which means that there is a risk of data loss.

    To download and install Windows XP SP3 see the link provided below.

    How to get Windows XP Service Pack 3 (SP3)

    Hope the helps of information provided. We know the results.

  • Is there a way I can get even SP2 and SP3 for windows xp home edition to my pc that had been in storage since 2007?

    I tried to go to windows update but redirected to micrsoft support page, which offers no SP2 and SP3 for windows XP Pro, and yet I don't have a network of computers running windows XP Pro download the SPs would be a disater as it is intended for more than one PC.

    It does not give the notice to go to the windows update page, but I can't get there because I do not have windows XP SP 3 installed on my pc, and even if I have it on a disc I couldn't install it anyway because SP 2 is not installed on this pc.

    So this pc seems to be thrown into a sort of limbo XP, does anyone know a way I can get these much needed without breaking service packs?

    The download versions below can be installed on a single computer.

    Where to download the SP3 Setup file:
    (The file is large but only installs the components required by your PC)
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en

    How to obtain the latest Windows XP (support CD or download) service pack
    http://support.Microsoft.com/kb/322389

    Your computer must be at least level SP1 or SP2 SP3 will not be
    install on XP Gold.

    Steps to take before you install Windows XP Service Pack 3
    Recommend the steps to take before you install Windows XP Service Pack 3.
    Also includes troubleshooting information.
    http://support.Microsoft.com/kb/950717/en-us

    I would also create a "save image" of my front disc
    to install SP3 just in case you have problems.
    Not having any Image backup software:
    Try the 'True Image' (has a 15 day trial version available)
    http://www.Acronis.com/homecomputing/products/TrueImage/

    ===========================================================================

    Windows SP2 download (WindowsXP-KB835935-SP2 - ENU.exe)
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyID=049c9dbe-3b8e-4F30-8245-9e368d3cdb5a&DisplayLang=en

    J W Stuart: http://www.pagestart.com

  • Tecra A9 move from Win XP SP2 to SP3 - questions?

    Anyone have trouble with their Tecra A9 when upgrading to Windows XP SP2 to SP3? I've heard horror stories with other laptops that users lock their systems or lose functionality.

    Thanks in advance for sharing your experiences.

    Hello

    I m not Tecra A9 owner but I already installed the SP3 Win and I didn't notice any strange problems after installing SP3.
    Of course, it might be possible that some drivers would not fully compatible with some fixes and patches but it seems that I m a lucky guy and there is nothing wrong with my operating system.

    But to be honest; I didn't notice any improvement after the installation of Sp3.
    However, you can install Sp3 on your system and if you have great compatibility problems you'd still be able to remove the SP3 of the system.

    Welcome them

  • Y at - he driver DAQ for MAC or Linux

    I know about Labview version for Mac or Linux.

    I just want to know if it's driver for the acquisition of data for MAC or Linux, which can take in charge USB DAQ.

    Thank you.

    Hi Alex,

    Lynn is correct. For the use of the DAQ USB OR with Mac and Linux, the best hardware and the only driver to use is NEITHER-DAQmx Base. The Readme file lists which specific devices are supported, specific Linux and OS X versions are supported and that has hardware is supported.

    [1] NEITHER-DAQmx Base 3.4 for Linux

    http://Joule.NI.com/nidu/CDs/view/p/ID/2128/lang/en

    [2] NOR-DAQmx Base 3.4 for Mac OS X

    http://Joule.NI.com/nidu/CDs/view/p/ID/2127/lang/en

  • SP2 and SP3 removes my system configuration file!

    This computer I'm is an entry door I think that a 2001... It has XP Professional SP1 on it... everytime I try to install the SP2 or SP3, it will restart for the installation... However if she never has to restart again I repair windows and restore it SP1... because SP2 and SP3 removes my file Config system... never heard of this and or any idea how to solve this problem?

    I've done several installs complete costs and...

    Make another & make the right way this time. See...

    Cleaning a compromised system
         http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

    Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

    HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

    After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

    4 steps to help protect your new computer before going online
         http://www.Microsoft.com/security/pypc.aspx

    Other useful references include:

    HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

    HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

    Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

    NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

    Norton Removal Tool
         FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    McAfee Consumer product removal tool
         http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

    See also:

    Risks & benefits of P2P file sharing
    http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
    http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

    Measures to help prevent spyware
    http://www.Microsoft.com/security/spyware/prevent.aspx

    Measures to help prevent computer worms
    http://www.Microsoft.com/security/worms/prevent.aspx

    Avoid fake security software!
    http://www.Microsoft.com/security/antivirus/rogue.aspx

    If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

    If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Program does not work after downloading the sp2 and sp3

    After spending hours and hours trying to download sp2 and sp3, I finally got to download completely successfully. for some strange reason when I try to open programs like weather bug and msn messenger they open but close immediately. How can I fix it?

    See...

    Help: I got hacked. Now what should I do?
         http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

    Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

    HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

    Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

    4 steps to help protect your new computer before going online
         http://www.Microsoft.com/security/pypc.aspx

    Other useful references include:

    HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

    HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

    Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

    NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

    Norton Removal Tool
         FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    McAfee Consumer product removal tool
         http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

    See also:

    Measures to help prevent spyware
    http://www.Microsoft.com/security/spyware/prevent.aspx

    Measures to help prevent computer worms
    http://www.Microsoft.com/security/worms/prevent.aspx

    Avoid fake security software!
    http://www.Microsoft.com/security/antivirus/rogue.aspx

    If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Code 800 b 0100 on Windows for Vista64 SP2 update

    Hello

    For a few weeks (December ' 09) I started to receive a notification indicating that one of my updates fails with Code 800 b 0100.  I clicked on help and he suggested I run the tool to "System Update Readiness Tool for x 64-based Systems"-I did.  After its completion, I still get the same error code.  I looked through the journal that it produces, but it is very big and I wasn't able to find anything of use.  After looking through Microsoft forums, I found a similar solution (http://social.answers.microsoft.com/Forums/en-US/vistainstall/thread/8f4ab273-8528-487f-8af3-aa75c7bb0186) who gave similar results.  I found another (CheckSUR.log) log file which seems to be more useful.  The log shows:

    =================================
    Preparation of control system was updated.
    Binary version 6.0.6002.22202
    Package Version 6.0
    2010-01-17 23:25

    Checking Windows Service Packages

    Checking of manifests package and catalogs

    Checking package Watchlist

    Watchlist checking
    (f) amd64_bthmtpenum.inf_31bf3856ad364e35_0.0.0.0_none_7ff053f99479855b CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.bthmtpenum presence of registry package failed, possibly an orphaned package on package watchlist
    (f) amd64_wpdfs.inf_31bf3856ad364e35_0.0.0.0_none_a5e566b2d3236f6d CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdfs presence of registry package failed, possibly an orphaned package on package watchlist
    (f) amd64_wpdmtp.inf_31bf3856ad364e35_0.0.0.0_none_9f92d6d487384aad CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdmtp presence of registry package failed, possibly an orphaned package on package watchlist
    (f) amd64_wpdmtphw.inf_31bf3856ad364e35_0.0.0.0_none_78371ba92ff2a242 CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdmtphw presence of registry package failed, possibly an orphaned package on package watchlist

    Checking packages

    Control components store
    (f) CSI shows Zero Length 0x00000000 WinSxS\Manifests\amd64_microsoft-windows-imapiv2-base_31bf3856ad364e35_6.0.6002.18005_none_21148475c820f4ee.manifest amd64_microsoft-windows-imapiv2 - base_31bf3856ad364e35_6.0.6002.18005_none_21148475c820f4ee
    (fix) Zero length CSI file replaced manifest file of the CSI: amd64_microsoft-windows-imapiv2 - base_31bf3856ad364e35_6.0.6002.18005_none_21148475c820f4ee.manifest from: C:\Windows\CheckSur\v1.0\windows6.0-6002-shared-x64.cab
    (f) CSI shows Zero Length 0x00000000 WinSxS\Manifests\amd64_microsoft-windows-photovoyager_31bf3856ad364e35_6.0.6002.18005_none_bdc051132f776919.manifest amd64_microsoft-windows - photovoyager_31bf3856ad364e35_6.0.6002.18005_none_bdc051132f776919
    (fix) Zero length CSI file replaced manifest file of the CSI: amd64_microsoft-windows - photovoyager_31bf3856ad364e35_6.0.6002.18005_none_bdc051132f776919.manifest to: C:\Windows\CheckSur\v1.0\windows6.0-6002-shared-x64.cab

    Summary:
    Seconds executed: 2554
    Found 6 errors
    Fixed 2 errors
    County CSI shows zero total length: 2
    Correction: CSI shows a length zero.  Total: 2
    CBS Watchlist component lack Total count: 4

    ========================================================

    If there is anything I can to get my file system online (outside of a complete re-installation) please advise.  I'd appreciate any help.

    Thank you

    Well, you are right when it comes to try to resolve the error 800b0100: http://support.microsoft.com/kb/956702 recommend to run the CheckSUR tool & you've already done that.

    You are also right when it comes to KB970430 and whether you really need to install it: KB970430 is a 'non security-related update. ' The line less resistance would be just "hide". Below, [2].

    That said, Norton applications are notorious for not not upgrade (or uninstalling) itself. You can try the procedure in [1] below first, especially if a free trial of Norton is pre-installed on your computer when you bought it.

    Good luck!

    ==============================
    [1]

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

    4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

    NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #8 below!

    5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

    6 see if KB970430 now installs. Follow all the prompts, if the operation is successful.

    7. now make a clean installation of NIS 2010 using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

    TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

    8. manually and repeatedly run LiveUpdate until you get a prompt "no update more".

    ==============================

    [2]

    1. stop the automatic updates service:

    Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
    Double-click automatic updates > click stop
    (Stopping the service will take a moment)

    2 remove the contents of the download folder:

    Start > Right click on run , and then select run as administrator >
    (type or copy/paste) %windir%\SoftwareDistribution > [OK]
    Open the download folder and delete its content
    Close the window.

    3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update |  View the updates available (or Select the updates installed): right-click on KB970430 | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.

    4. start the automatic updates service:

    Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
    Double-click automatic updates > click Start
    (Stopping the service will take a moment)

    --------------------------------
    To restore/show updates for Vista: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • A computer WinXP SP1 can be updated WinXP SP2 or SP3

    Windows xp service pack 1 recent recharge

    is no longer compatible with the windows update web site

    32

    dial the system

    You have a friend with a fast connection?

    If you haven't already done so, you will need to install the SP2 and SP3

    How to obtain the latest Windows XP service pack
    http://support.Microsoft.com/kb/322389

    Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

    Windows XP Service Pack 2 - Download (for single PCs too)
    http://www.Microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8e-4F30-8245-9e368d3cdb5a&DisplayLang=en

    Are you ready for WinXP SP2?
    http://support.Microsoft.com/default.aspx?PR=WindowsXPSP2

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

    It is stated in "How to obtain the latest service pack XP" is.

    If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

    Download the Windows XP Service Pack 3 package now

    See also: http://support.microsoft.com/kb/2497281
    You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  • Where to find a download for KB2541763 for winxp SP2

    original title: as KB2541763 patch for winxp SP2

    I need to update IExplorer on a winxp SP2 system with an identical to KB2541763 task used to SP3systems. Is there an alternative solution upgrade to SP3?

    Hello

    Unfortunately, the patch KB2541763 are available for Windows XP Sp3, you must install Windows XP SP3 to download this hotfix.

    Step 1:

    Check out the link below to download the Windows XP Service Pack 3.

    Learn how to install Windows XP Service Pack 3 (SP3)

    http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

    To learn more about Windows XP SP3, click the link below.

    Overview of Windows XP Service Pack 3

    http://www.Microsoft.com/download/en/details.aspx?ID=10767

    Step 2:

    Once you install Windows Service pack 3, you can download the update KB2541763 from the link provided below.

    Update for Windows XP (KB2541763)

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26585

  • Do I need to install SP2 before SP3? If Yes, where can I find the Microsoft of SP2 version?

    I had to re - install Windows XP SP1a, from a CD of resettlement came with my Dell laptop. This was done because I upgraded the hard drive. This facility went well. I went to the Windows Update site to try to get the SP2 and SP3. The webiste is said to SP2 until you can do SP3. The only version of SP2, I find on the website says that it is for the professionals and see the link for the Service Pack to the simple version. When I go on this link there is no one version. Do I need to install SP2 before SP3? If Yes, where can I find the Microsoft of SP2 version? In addition, the site says that automatic updates SP2 but I checked my Configuration of the automatic updates and it will not take anything in. Is there a way to force the automatic update to run immediately? Thanks, Ben

    Ben,

    I totally agree with PML, you should be able to set up IE and then go to the Windows updates from there, once you get on the Windows Update site it will scan your system and implement critical updates and optional updates SP2 and SP3 should be on the list. It's a way to force an immediate update.

    I hope this helps.

    Jim

  • Consistent degradation of privileges and functionality in Xp Sp2 to Sp3.

    My problem is I'm always losing administrative privileges, without apparent reason, on my Windows Xp Pro Sp2 to Sp3 upgrade facilities.  This occurs after the installation of updates after Sp3 installed on this version of Xp professional Sp2.  This has happened time and time again and becomes quite frustrating.

    Hi Lhun - Grub - AP Padma 'gro-' dul gyi,
     
    -Is this problem occurs after the installation of updates every time?
    -You receive an error message when this problem occur?
    -When you mentioned that you lose Admin privileges, does this mean that you are unable to work with the programs or access to certain files/folders?
     
    If you receive "Access denied" error message while trying to access any file/folder, follow the steps in the article below:
     
     
    After return with more information pertaining to the matter for us help to help you better.

  • Windows XP need to upgrade to SP2 or SP3

    Hello

    I have Windows XP SP1.  I need to upgrade to SP2 or SP3.   There are free downloads online.  can I use them? or should I buy from you?  Please me know

    Thanks in advance

    You don't need to buy anything. If you check in Windows updates, service packs must be put at your disposal. (Unless it's an illegal copy of XP).

    If you installed SP1a, you can ignore the SP2 and go right to SP3. If SP1 is installed, to install the SP2 and SP3.

    Before you install, disable your antivirus and anti-spyware such as Windows Defender programs. If you are using another firewall, disable and enable Windows Firewall in the control panel for the installation. Once a requires SP3 and working, you can activate the third-party firewall and put the Windows Firewall. Do not keep the two running.

    Service Pack 2 for Windows XP
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=049C9DBE-3B8E-4F30-8245-9E368D3CDB5A&displaylang=en

    Steps to take before you install Windows XP Service Pack 3:
    http://support.Microsoft.com:80/kb/950717

    WinXP SP3 - read all the prerequisites for a successful installation
    http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP3-read-all-prerequisites-for-a-successful-installation.aspx

    Release notes for Windows XP Service Pack 3
    http://download.Microsoft.com/download/c/d/8/cd8cc719-7d5a-40d3-A802-e4057aa8c631/Relnotes.htm

    Download Windows XP Service Pack 3 here:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

    Bruce Hagen
    MS - MVP October 1, 2004 ~ September 30, 2010
    Imperial Beach, CA

Maybe you are looking for