my desktop screen returned to the left and I have to turn my laptop to read?

Similar Questions

• Tablet draws a leak out of the screen directly to the left, whenever I have down Flash CC

  My TS-6608 Turcom / Oh P608N Tablet (people say that they are the same model and I tried both the original driver P608N installation and driver installation Turcom TS-6608 slightly modified for Windows 10 Turcomdrivers)

  draws a line from leaking out of the screen directly to the left whenever I have support with my pen pressure instead of my way of drawing. In Adobe Photoshop CC, it works perfectly fine. Why is this happening and how can I solve this problem?

  A line for every time I press. It is the only blue because that's the color of pen, I had chosen. This happens with the pencil tool and the Brush tool. I happen to run two monitors. Flash is open on the right monitor but I tried to swap around, drop down to a monitor, and it doesn't seem to change. I don't know if this is specific to my tablet or a problem with the program.

  

  It seems that there is a split second after the contact where it does not read my travels before putting in the left straight down.

  

  

  In Flash CS6, there seems to be a similar problem. When I press down, the first point shows but it stops to record the pressure down almost instantly even if I continue upward with the pen pressure. He holds the State pressed down but is not to follow the movement. With my mouse, I can then move around to draw the path, but it is not picking up the pen.

  

  Post edited by: Christopher Navarre

  Post edited by: Christopher Navarre 11:14 August 26, 2015

  In Flash CS3, it goes the same way as Flash CS5.5 where appears a point, it will not save the press which took place or release of the pen tip. If I move the mouse after pressing the pen, I can drag it around the same way. The problem seems to be that flash is not just reading presses pen continues but I don't know how to fix it. In other programs, it seems to work very well (Paint, Photoshop, etc.)

  Another thing I discovered is that if I have another program that is not selected in the active window flash but try to draw in flash using the Brush tool and then he reacts appropriately, but the second I drop the brush stroke and let Flash CC 2015 be the active window again it does not recognize my movements.

  I think it might be a simple driver issue.

  ANSWER:

  There seems to be a bug in the driver Turcom code. If you disconnect a monitor then you can normally draw in flash. What happens with two monitors, it's that the pen cursor position instantly repositioned correctly when you press down. Because I was drawing on my right monitor, it tended to be left (maybe because thought Flash that I worked on monitor 1 or something).

  I have an e-ticket with Turcom as a permanent solution, but for now, simply using a monitor works fine.

• The icons on my desktop page always returned to the left of the start screen.

  The icons on my desktop page always returned to the left of the start screen. I have to uncheck the "align icons on the grid. Any ideas why & how can arange the icons as I want! Do not know if by chance, but it started after I recently had to reinstall MS Essentials

  Hello

  I suggest you to follow the steps and check if it helps.

  a. right click on the desktop.

  b. choose 'Customize'.

  c. on the left side of the Control Panel, click on "Change desktop icons"

  d. uncheck "allow themes to change desktop icons."

  See also:

  Show or hide common icons on the desktop

  http://Windows.Microsoft.com/en-us/Windows7/show-or-hide-common-icons-on-the-desktop

  The desktop (overview)

  http://Windows.Microsoft.com/en-us/Windows7/the-desktop-overview

  I hope this helps.

• area 1 "black on the left and right of the screen

  My screen on my computer hp laptop has a zone 1 "black on the left and right of the screen yesterday. This reset that to make it fit the screen?

  Poster of thread double (now deleted) by Bill Smithers:

  Hello

  Go to the HP Web site > drivers download Section > then key in your number cell phone model > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or do a system restore to before that happened.

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• I have black lines 2 inches on the left and right side of my screen how can I expand and remove black maqrgins

  I have 2 inch black margins on the left and right of my screen - how to remove and expand my screen

  Hello
  I suggest you run the fixit and see if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  For more information, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor

  It will be useful.

• I've recently upgraded to CS6. For some reason any floating document windows that I move in the workspace, pull out the interface, especially to the left and sometimes to the bottom of the screen. I gave tried Essentials rearmament and Interface to d

  I've recently upgraded to CS6. For some reason any floating document windows that I move in the workspace, pull out the interface, especially to the left and sometimes to the bottom of the screen. I gave tried Essentials rearmament and default setting Interface. A message letting me know that by default has been reset but I still have the problem. It's SO frustrating as a large part of the time I can't go to the window, I want to work on. Help, please!

  Hi John

  Try resetting preferences

  Press and hold the CTRL, ALT, shift (Windows) / command Shift (MAC) Option in starting up of Photoshop.

  Select Yes

  Note:-make sure you backup Presets/stock/Modified Workspaces/Plugins (if any)

  Thank you

  Assani

• How can move the indicated address browser on the left and to the right of the footer of mozilla in the add-on bar where is jused to be in previous versions as icon of Personas?

  How can I move the address indicated when I point to a link on the page of the browser on the left and to the right of the footer of mozilla in the add-on bar where is jused to be in previous versions as icon or the weather icons of Personas?

  You can install the following add-on to return some of the old features of the status bar. The module Bar must be turned on. The add-on will also stop the screening of the "tooltip" text of loading type State, and instead of it, show it in the bar of the add-on:

  • Evar-4-status: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/
  • After installation and reboot:
    • Open the Customze window (Firefox button > Options > toolbars OR view > toolbars > customize OR ALT + V + T + C OR right click in the empty space at the end of the tab bar and select Customize)
    • While customize window is open, drag 'Text State' (the URL for loading, as you mentioned), "Progress meter" and "Download Status" in the window customize to the bar of the add-on in order and the position that you want to display. Then click on the button "Done" at the bottom right on the window customize.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• I just started using Garage Band with 2i2 Focusrite Studio material. When I record my voice through microphone, I hear a mono. Is it possible to share sound to the 'left' and 'right' channels, i.e. to imitate a stereo mic?

  I m using MacBook Pro with Maverick OS X version 10.9.5 and Garage Band 11´ v. 6.0.5 with hardware 2i2 Focusrite Scarlett Studio

  kopi42 wrote:

  Is it possible to share sound to the channels of the 'left' and 'right '.

  Yes:

  http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly

  (Let the page load COMPLETELY. The link to your answer is at the top of your screen)

• screen moves to the left on hdtv screen when loading games

  With some games, when they load the screen moves to the left, causing the left side of the screen appears on th right as well as a black boarder. im running windows 7 on an emachine 2.0 GB with an AMD sepron (tm) 145 Proccesor 2.80 GHz with Geforce NVIDIA nforce 430 vidieo - and im using a flat screen of 37 "viso HDTV as a monitor

  Hello

  In windows 7, the resolution of the screen during playback of some of these changes of games based on the resolution of the screen, you have provided for the game.

  Method 1:

  Do a right click and go to the shortcut properties and find the box where it says 'run' pass the value normal in full screen.

  If this does not help, configure the following setting and check:

  (a) right click on the game shortcut icon, click Properties.

  (b) on the shortcut tab, go to run.

  (c) in the drop-down list, select expand.

  (d) click on apply to apply the setting.

  (e) click on Ok to confirm the change.

  Method 2:

  Also, I suggest you try changing the hardware acceleration, here are the steps to change the hardware acceleration.

  (a) go to start > Control Panel

  (b) in the window of the Control Panel, click appearance and personalization

  (c) click personalization > display settings, and then click Advanced settings.

  (d) go to the Troubleshooting tab, and then click on change settings.

  Note:

  The settings will be disabled if the graphics card driver does not support disabling hardware acceleration.

  Move the hardware acceleration slider until it is one notch to the right of none. It is the basis of acceleration.

  Click OK twice, and then close the window.

  You can also see this thread and find the solution posted by fix ' that1.guy on Saturday, January 2, 2010 02:06 "user of the problem.

  http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/2ff8212d-8656-4ced-9da1-21deed2c6c2a 

  I hope this helps!

  Thank you, and in what concerns:
  Naman R - Microsoft technical support engineer.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I refresh my desktop or restart my computer, all the icons on my desktop are moving to the left.

  The desktop icon question

  When I refresh my desktop or restart my computer, all the icons on my desktop are moving to the left.  I drag them back where I want to, and the next time that I reboot, they are to the left.  Running MS XP on this computer.

  How can I fix them in place?

  Hello
   
  I suggest you to change the Auto settings fix the registry.
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
   
  322756 how to back up and restore the registry in Windows
   
  a. click on Start and then run.
   
  b. type regedit and press to enter.
   
  c. navigate to the following key.
   
  HKEY_USERS\. DEFAULT\Software\Microsoft\Windows NT\CurrentVersion\Program Manager\Settings
   
  d. change the REG_DWORD value 0.

• My 2 year old somehow gave a password on our computer and now we can get in our office. Without having to return to the default settings, anyone have a suggestion on how to solve this problem?

  My 2 year old somehow gave a password on our computer and now we can get in our office.  Without having to return to the default settings, anyone have a suggestion on how to solve this problem?

  If you have a different user account with administrative privileges, Panel you can connect that account and change the password of your account of origin of the user accounts applet in Control Panel. If you do not have another account like this set upwards or that you do not have the password which you will need to log on to the built-in Administrator account. In XP Home, start the computer in Mode safe. This, by repeatedly pressing the F8 key as the computer starts. This will put you in the right menu. Navigate using your arrow up; the mouse does not work here. Once in safe mode, you will see the normally hidden administrator account. The default password is white.

  In XP Pro, you don't need to go to Safe Mode. In the home screen, do Ctrl-Alt-Del twice to get the classic Windows logon box. Type in "Administrator" and the password that you assigned when you set up Windows.

  MS - MVP - Elephant Boy computers - don't panic!

• How to stop the blue e screen to start the computer and also if you try to download anything

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  How to stop the blue e screen to start the computer and also if you try to download anything:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  We need numbers BBCode or Code to stop the bluescreens and utilities below will help you
  provide us information. Also the methods here can help you solve the bluescreens.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• When I try to open the keyboard screen, I get the prompt and click to connect, but it does not connect.

  OT: On the keyboard interface.

  When I try to open the keyboard screen, I get the prompt and click to connect, but it does not connect. My hard keyboard is dysfunctional and now I can't type my password to connect. Is there a way to get around this? Thanks for any help.

  There is a problem with the KB3004394 update that causes what you see as well as other issues.

  Uninstall this update, your system should return to normal.

  While in Windows Update, select View Update History then installed updates. Go to the bottom of the list to KB3004394, right-click on it and choose uninstall.

  Microsoft has removed the update of the distribution.

  I would try to borrow a keyboard if you can so that you can perform the uninstall.

• When I make a rectangle, the left and right edges are a bit fuzzy and thicker, then the bottom and at the top. It seems very strange and I don't know why that is.

  When I make a rectangle, the left and right edges are a bit fuzzy and thicker, then the bottom and at the top. It seems very strange and I don't know why that is.

  I made a new document (72 dpi, preview mode: by default) and I tried to see if it's the same thing on another screen, and it is.

  I thought that the problem would be with the 'align on the pixel grid' property but by activating / deactivating it doesn't matter. Maybe it's something with anti-aliasing? "Work of anti-aliasing" is checked in my preferences...

  

  Here's an example, zoom level 100%.

  The forms do not look sharp at all. No idea what this can be?

  Lieselot,

  Or you can try to switch between the GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

• I am trying to embed vimeo files but they appear with black borders on the left and right edges

  On vimeo, videos are in the right proportions. But as soon as I bring the videos in Muse with a video widget, a black border appears on the left and right sides.

  Help with the help of Adobe Muse CC

  The iframe that contains the video is set on a height of 650px. The proportions of your video is 16:9. Width of the video is of 1155. 1155px 650px x is 16:9, so your video is displayed correctly. If you were to try to force the video to fit on the edges left and right, someone viewing on a screen smaller than your will see the black bars at the top and bottom.