My dosent PCs have all the sounds

Similar Questions

• I have all the sounds, BUT those of Windows Media Player 7.

  I have all the system sounds, sounds of a PowerPoint presentation, etc.. No sound of anything that uses Win 7 Media Player.  Video is very good and the bar at the bottom, which indicates that a piece of music from a CD plays forward as if he were playing, but I don't hear anything.  Ran a Uniblue registry cleaner a week ago and I don't think that the WM Player souand works since.  Restored the registry to its 'own pre' State, still no sound in WMP. just from the video.  Also installed Win 7 SP1 which asked me to set up the media player.  He said yes, he had run, duly filled, no sound!  Any suggestions?

  You hear no sound when you play a MP3 file in Windows Media Player?

  Please make sure that the sound is not muted in WMP, and that the volume is high enough.

• I would change my windows again because is working dosent good can you tell me how I can do it because I have all the vista cd

  I would change my windows again because is working dosent good can you tell me how I can do it because I have all the vista cd

  You don't say what kind of discs to have.

  Here is the info on how to reinstall using a Vista DVD from Microsoft.

  For all other Vista reinstall information, contact the manufacturer of your computer.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I lost all the sounds in Quicken. I have sounds enabled in the program.

  I lost all the sounds in Quicken.  I have the sounds 'on' checked in the program.  I replaced the sounds and offers them to such OLDsounds ordered in the 'help' and replaced with sounds of Windows 7.  They still do not work?  Help

  I have the most current 2012 installed Quicken.  They worked fine until the last month.

  Hi Wkessinger,

  Thanks for posting your question in the Microsoft Community forum. I understand that you have lost sound in the quicken program.  I guess this must be difficult for you. I would like to help solve you the problem.

  Before troubleshooting, provide us with information.

  1. what security software is installed?

  2. don't you make changes to the computer before the show?

  3. do you get any error code or message?

  In order to help you resolve this issue, follow these methods:

  Method 1.

  You can perform a system restore to an earlier date that the computer was working fine.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Method 2.

  You can read these articles and check if that helps.

  No sound in Windows: http://windows.microsoft.com/is-is/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Tips for solving common audio problems: http://windows.microsoft.com/is-is/windows7/tips-for-fixing-common-sound-problems

  Additional information.

  You can view this issue in the community Quicken here: https://qlc.intuit.com/

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• iPad Pro 12.9 "sound button.  Where is he? Today just started using and should have disabled the sound.

  Where is the button main sound on iPad Pro 12.9 "? Just started using it today and should have disabled the sound by mistake and now I can't find where to turn it on.  All sounds are on in the settings section.

  The volume of the up/down buttons are on the right side of the iPad.

  

  http://help.Apple.com/iPad/9/

• I don't get all the sounds from my speakers

  Original title: sound recording play

  I don't get all the sounds from my speakers... the icon has an x through it... said that they don't are not hooked... shouldn't have internal sound

  Hello

  1. what version of operating system you are using?

  2. What is the full error message that you receive?

  You can try the procedure in the below mentioned link and check if it helps.

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
   

  Hope this information is useful.

• Suddenly, I hear all the sounds of e-mail downloads

  I can listen to CDs, but when I download the emails that contain sounds, I don't get it, he used

  Hello

  
  1. what e-mail services you use?
  2. don't you make changes to your machine before the problem?

  Your question does contain all required information necessary for help us to you to. Please re - write your question, this time make sure you have all the necessary info and we will try to help.

  http://support.Microsoft.com/kb/555375

  Also, I suggest that you contact the provider of e-mail with the number

  I use yahoo and hotmail. I am currently using clear that my my wireless connection.  The only thing I did screw this to the top of my computer was down load itunes and with it a kind of virus detection, not allowing my computer working properly, so I restored it to an earlier date.  I don't know what a thread is.

• I can not all the sounds from my computer

  I can not all the sounds from my computer. I hae tried to click place volume icon in the taskbar, but it won't let me and she also come with 'there is no active mixer device. To install mixer devices, go to control panel, click Printers and other hardware, and then click hardware, but it's not it will fade. Please can someone help me.

  The sndvol32.exe file is possibly corrupt.

  To replace, there are two methods:

  (1) open the Windows Explorer > tools > Options > view > make sure that show hidden files and folders is NOT checked. Access the c:\windows\system32\dllcache and locate sndvol32.exe > copy it into the following folder c:\windows\system32, overwrite the existing file. > Re-boot, you should now have access to your sound mixer and be able to place the icon on the taskbar. If for any reason any you do not find the dllcache folder:

  (2) put your XP CD in a driver, don't let it start. Then: Start > run > type in msconfig > enter or OK > extract a file > 1st enter in sndvol32.exe > in the second point of the box to your CD player > 3rd enter in c:\windows\system32 > extract file > run over if necessary, close everything and restart.

  If the above does not work, re - install you 'audio drivers, although I would only do it as a last ditch measure.

  See you soon,.

  Jerry

• All the sounds that are specifically related to the Microsoft system works not-missing the system tray volume control and Accessories Entertainment empty folder.

  I have no volume control icon in the system tray and my Accessories Entertainment folder is empty.  I can play the sound through iTunes and VLC media player but is no longer the Player Windows Media can play CDs or mp3 files.  I have more Microsoft system sounds and the sounds of a large number of online streaming sites no longer play unless I can their route via iTunes or VLC media player.  Windows Media Player says missing codecs if I try to play mp3 files.  I have upgraded to Windows Media Player 11 to see if that would bring codecs, but without any result.

  My problems were not related to the missing CODECS.

  I knew the sound on my system was basically correct, given that I was able to listen to free VLC Player I downloaded to replace the Windows Media Player while he was not working.

  However, the solution to my problem of noise was really simple, but the answer was just very complicated track.

  I noticed that a lot of the chatter about similar problems on other forums was related to Adobe Flash Player.

  I had recently upgraded to the latest versions all Adobe products on my system.  I didn't make the connection that Adobe software could affect all the sounds of Microsoft.

  Finally, after doing a Google search on Adobe Flash Player issues, I found a partial solution:

  Here's an exact quote:

  Very well, the problem is really the wavemapper mapping in the registry of Windows such as reported by a member of the forum.

  All you have to do is to open the registry editor by going to start menu, run, type regedit, then Enter.
  After that, in Registry Editor, navigate yourself in the left pane until you reach

  My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Drivers32

  And then in the pane, right-click and click New, select string value, enter "wavemapper" (without the quotes, of course), ENTER, enter "msacm32.drv".
  Come in.

  Well, of course, it didn't work the first time. I received this message:

  the Registry Editor cannot rename the new value #1. The specified value name already exists. Type another name and try again
  
  I was puzzled for a while, until I saw someone in the forum with a similar problem mentioned that they had found a fix for this problem by granting permissions subkey. This led me to Google search for registry permissions.

  After that here, that's what I had to do, and although it seems that a lot of steps, it's really very simple:

  Once I had reached the drivers32 registry entry I pointed out the entry in the right pane. Mine said (default) REG_SZ (value not set). I then clicked on change on the Bar Menu and clicked on permissions on the menu drop down.

  This opens the permissions for Drivers32. I highlighted at the entrance of the Administration and click the Advanced button.

  This opens the "Advanced Drivers32 security settings. I made sure that I was under the permissions tab in this window. I noticed that the box called "inherit from parent the permission entries that apply to child objects. Include these with entries explicitly defined here"was checked. Yet once, I did ensure that the entrance of the Administration has been highlighted and then I clicked on the button change.

  This opens the "permission for Drivers32 entry. I chose "this key and subkeys" apply to: falling to the bottom of this window. Then, I checked the full control checkbox. I clicked on OK.

  I clicked on apply advanced Drivers32 window security settings.

  I clicked on apply permissions for Drivers32 window.

  Once that I had done it all a lot more entries appeared in the right pane for Drivers32 including my wavemapper entry. This is where all along; Quite simply, there is not all the permissions to do anything, including being in the registry pane.

  I left the registry and now all my sounds are back and the volume icon is once again in my system tray. Who would have thought?

  Hope this helps someone else.

• His record game, my microphone is picking up all the sounds around me and to transfer them to my helmet.

  original title: his record game

  For some reason, all listening to ANYTHING on my computer with my headphones Bose, which are designed to eliminate all surrounding sounds, I hear all around me, including Tape this message, as if my microphone is picking up all the sounds around me and to transfer them to my helmet.  I have accidentally done to cause this, please?

  Thank you!!!

  Hello

  Click with the right button on the speaker near the right lower clock - recorders - then right click in the BOX
  and check also show a disabled device and show disconnected devices. Then double-click on your microphone and
  on the levels tab - MUTE it. You could also experiment with using a level lower or less thrust on this
  same tab.

  Connect a microphone, music player or other audio device to your computer - see 'connect a microphone.
  to your computer"which has an image of these parameters.
  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• After having saved HP, all the sounds disappeared

  It asked me to update my Bios (?)  A few weeks ago. Yes, I did. Later, I noticed the laptop was strangely like the internet would be cut frequently. I went to save the laptop for a moment before the problem happened. Bandwidth works fine now, but all the sounds disappeared. I checked for problems using 'Help' suggestions, but he tells me that everything is fine. The sound is output from the headphones or the internal speakers.

  Can I have supported it until before the Bios (?) has been updated.

  The laptop is a HP Pavillion (about 2 years) using windows 7 and Norton 360 (which I ran scans to try to find a problem as well)
  Any suggestions?

  Thanks much for the reply. The model would have helped! haha. (it's a HP Pavilion)

  After that I wrote here, I checked a few other places and saw a post that said to uninstall audio driver and download a new one. It worked.
  For all others, the link is:
  The post: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/No-Sound/m-p/1889085/highlight/true#M28332
  (New driver) download: http://ftp.hp.com/pub/softpaq/sp58001-58500/sp58131.exe

• BlackBerry smartphone how to cut all the sounds?

  Hello.

  I have a v5.0.0.400 (Platform 5.1.0.110) 9700 "BOLD"

  I always keep my phone on vibrate - I prefer this way I can be discreet and meet my convienience.

  I put an alarm the other day and was shocked to discover that she played an alarm bell.

  I also wanted to watch a movie in silence, but it wouldn't let me, and started playing the track despite me thinking I had all the sounds.

  Is there a master setting to cut all the sounds, period?

  If this is not the case, how could I do to at least the alarm sounds?

  Thanks in advance for the help.

  No, there is not a master setting.

  The alarm... set your alarm in the clock settings > Options > set alarm in Silent, or with or without vibration.

  For the film, simply adjust the volume down to nothing.

• reset of all the sound elements

  I have a project with abouf 200 audio clips.    I am using the 2014.1.1 cc and adding audio action through the menu option, but it has at least several times, will play audio when another audio clip is played.   So what I want to do is to reset all the sound elements at the beginning of the clip, not only pause.

  Found the answer to zero and stop any audio when I click on a button to play an audio clip, I put this code before the new audio clip

  $('audio').each(function(){
   this.pause(); // Stop playing
   this.currentTime = 0; // Reset time
});

• When deleting a long shot in CS4 editing all the sound elements don't is not loading

  I've seen similar issues here, but the solutions don't have not helped me.  Sometimes, I'm kicking speech or concerts where the source video is up to one hour in one take.  I usually capture all the sound elements of a CAM camera and sync on the timeline.  Sometimes, when I bring the master stroke down in the timeline, the full video will be available instantly, but only a few minutes the audio will load.  Sometimes, I left for a few minutes, assuming that it takes time for the audio load, and sometimes it works.  But, today, for the second time, I just get the first 3 of 45 minutes of audio.  The graphic track on the timeline shows the presence of the audio and I can get it in preview, for a few seconds at a time.

  Any suggestions?

  I use CS4 ver 4.0 Ironside

  PC - ASUS P6T deluxe V2 Core 17

  INITEL 17-940 2.93GHZ processor Core

  Black card magic Audio

  Windows Vista Business 64 bit OS

  For imported files, one must allow Audio Conform completely, before making any change. This ARTICLE will give you general information.

  I hope that's all that happens, and good luck,

  Hunt

• Cut all the sounds

  Hello
  
  everyone knows ACE to cut all the sounds?
  The sounds I have are incorporated.
  
  TX

  SoundMixer.stopAll ();