reset of all the sound elements

Similar Questions

• When deleting a long shot in CS4 editing all the sound elements don't is not loading

  I've seen similar issues here, but the solutions don't have not helped me.  Sometimes, I'm kicking speech or concerts where the source video is up to one hour in one take.  I usually capture all the sound elements of a CAM camera and sync on the timeline.  Sometimes, when I bring the master stroke down in the timeline, the full video will be available instantly, but only a few minutes the audio will load.  Sometimes, I left for a few minutes, assuming that it takes time for the audio load, and sometimes it works.  But, today, for the second time, I just get the first 3 of 45 minutes of audio.  The graphic track on the timeline shows the presence of the audio and I can get it in preview, for a few seconds at a time.

  Any suggestions?

  I use CS4 ver 4.0 Ironside

  PC - ASUS P6T deluxe V2 Core 17

  INITEL 17-940 2.93GHZ processor Core

  Black card magic Audio

  Windows Vista Business 64 bit OS

  For imported files, one must allow Audio Conform completely, before making any change. This ARTICLE will give you general information.

  I hope that's all that happens, and good luck,

  Hunt

• I lost all the sound elements and more...

  Say hello to Steve and all.

  Just at the moment where everything was fine, something fatal happened. I use a mixture of files MOD (Panasonic cameras) and AVI (mini camera Cannon Digital Video) files and everything went well with the Assembly until yesterday.

  The problem is that the program (first Elements 7) thinks that my media is online, but is not offline. When I try to connect again, the option "Find media" gives the following error: "the selected file cannot be bound because its type (video) does not match the type of original (audio and video) file."

  I can't go there.

  When I try to play the other MOD files in my library, I have no sound. When I try to play the MOD file with another program, everything works fine.

  Now I'm stuck. I can't get the first Elements 7 to recognize one of my MOD files. It worked for months, but this has me at a dead stop.

  Last night, I ran the disk Setup Repair Option and program started working again - but it was time for bed, then I stopped for the night. Tonight, the problem is back and can not be repaired.

  I'm stuck in a big way. My deadline for a video of the party is Christmas, but I can't go forward.

  Please help me. I don't know how to solve this problem.

  Sincerely,.

  Brian

  The problem started at halfway through the process of editing last night. No Windows Update has been installed.

  If you have the entire window full automatic update (default), there are to many OS updates that will download and install, and the user never know thereon, unless they require a reboot. Many do not. I downloaded just manually full updates of Office, as well as four new patches for XP - Pro, and none has required a reboot. Unless you changed the default, these things can download and installed without the user knowing never.

  But back to my hypothesis. This could be a corrupted file? If so, how can I determine the guilty file?

  Glad to hear that things are working for you now. That would be when I would do a Save_As and a Save_As_a_Copy, just in case. This ARTICLE will give you some details on the differences between the three flavors of Save, as well as some information about what constitutes one. File PREL.

  The only way to get a bad would be systematically eliminate assets, test along the way.

  What is the link for your outside? USB external references have been known to have serious problems of read/write. I look in my event viewer and look for warning messages or no error. Look especially closely in links in everything from errors of pilot, nor delayed write errors. That link is to the external USB.

  I have not met, nor have I read of these issues with FW, 400 or 800.

  Good luck and we hope that the project will be completed in due time!

  Hunt

• A lot of Audio project, stop all the sound elements rather than list each of them to take a break

  Hi all

  I use the following code to play and pause the music.

  If (sym.$("_05letitbe") [0] .paused) {}

  SYM.$("_05letitbe") [0]. Play();

  Play this one

  SYM.$("AldoNova") [0] () .pause;

  Break of it (if he plays)

  } else {}

  SYM.$("_05letitbe") [0] () .pause;

  }

  OK, looking at the 3rd line (sym.$("AldoNova") [0] () .pause;)

  )

  If I have 100 songs in the project, I have 99 songs here the list and put it on pause.

  As you never know that someone is listening to at any given time.

  So. My question is this.

  How can I stop (stop) all the other songs, when the user click on a song to play.

  Something like that.

  If (sym.$("_05letitbe") [0] .paused) {}

  SYM.$("_05letitbe") [0]. Play();

  Play this one

  $("audio").trigger ("pause"); All the other songs that can play pause

  } else {}

  SYM.$("_05letitbe") [0] () .pause;

  }

  However, I've tried and it doesn't work.

  Moreover, there is no key frames or labels for audio, and I want TO keep it this way.

  Wayne

  Well, I have not found a way to make this work in addition to the example I gave you. I changed the audio to make it more obvious in this example. If you can use jquery, then I updated using $each)

  Microsoft OneDrive - access to files anywhere. Create docs with free Office Online

• I have a Latitude E6400 Windows Vista and lost all the sound elements. How can I get that back?

  I can't do audio on youtube or DVDs on my laptop. Any suggestions?

  Hello

  Do you have any audio at all?

  You should probably download and install the latest drivers for your audio device.

  Be sure to set the compatibility to the correct version for which they were written.

  Uninstall your Audio device in Device Manager before you reinstall the drivers.

  EDIT:

  I just checked Dell, and there are three models different e6400.

  I downloaded the Win 7 Audio drivers for e6400 and found that they will probably have to be REMOVED to be able to establish the compatibility of the installer with INSTALLATION inside the packaging.

  To do this, you will need a program such as WinRar, WinZip or 7Zip. I think 7Zip has a free version.

  After installing the program, right click on your program of driver installation and EXTRACT, as you would a zip file.

  Then open the folder and double click it to install the Win 7 INSTALLATION compatibility value

• I lost all the sound elements of the vista Media Center! How can I fix the problem?

  I have vista Home premium op sys and my media center windows lost audio output. Wheather read files from my hard drive or a DVD. mEDIA PLAYER has SOUND BUT NOT MEDIA CENTER. How can I fix the problem?

  Hello
  • What were the changes made before the problem occurred?
   
  You can check this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-problems-in-Windows-Media-Center

• iMovie 10.1 exports only 20 minutes of visual, but all the sound elements

  Can someone help me?

  I've sorted it after 6 attempts.

  K

• Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

  If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

  Best regards

  Q

  Hello

  It may help to place your watch in mode do not disturb before driving:

  -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

  You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

  -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

  To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

  https://www.Apple.com/feedback/watch.html

  (This is a supportive community focused on user - you don't talk to Apple here).

• I don't get all the sounds from my speakers

  Original title: sound recording play

  I don't get all the sounds from my speakers... the icon has an x through it... said that they don't are not hooked... shouldn't have internal sound

  Hello

  1. what version of operating system you are using?

  2. What is the full error message that you receive?

  You can try the procedure in the below mentioned link and check if it helps.

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
   

  Hope this information is useful.

• I just put a graphics card and I can not all the sounds of my hdmi on the back of the Badr

  Radeon hd5450

  I just put a graphics card and I can not all the sounds of my hdmi on the back of the Badr

  Hi Edrey Davila,

  1. what operating system is installed on the computer?
  2. are you sound the computer?

  If you connect your computer to the TV using a HDMI cable, try the steps from the following link:

  Connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  HDTV: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

• I'm not all the sounds from the speakers. The volume is up

  I'm not all the sounds from the speakers.  The volume is up

  The following links may be worth a visit:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (Win XP / Vista / 7)

  (307918) how to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918/en-GB

• I can not all the sounds from my computer

  I can not all the sounds from my computer. I hae tried to click place volume icon in the taskbar, but it won't let me and she also come with 'there is no active mixer device. To install mixer devices, go to control panel, click Printers and other hardware, and then click hardware, but it's not it will fade. Please can someone help me.

  The sndvol32.exe file is possibly corrupt.

  To replace, there are two methods:

  (1) open the Windows Explorer > tools > Options > view > make sure that show hidden files and folders is NOT checked. Access the c:\windows\system32\dllcache and locate sndvol32.exe > copy it into the following folder c:\windows\system32, overwrite the existing file. > Re-boot, you should now have access to your sound mixer and be able to place the icon on the taskbar. If for any reason any you do not find the dllcache folder:

  (2) put your XP CD in a driver, don't let it start. Then: Start > run > type in msconfig > enter or OK > extract a file > 1st enter in sndvol32.exe > in the second point of the box to your CD player > 3rd enter in c:\windows\system32 > extract file > run over if necessary, close everything and restart.

  If the above does not work, re - install you 'audio drivers, although I would only do it as a last ditch measure.

  See you soon,.

  Jerry

• My Dell with xp has all the sounds. Sometimes I will leave and then it will come back on. However, not as strong, as it should be. The lights on the speakers are

  My Dell with xp has all the sounds.  Sometimes I will leave and then it will come back on.  However, not as strong, as it should be.  The lights on the speakers are

  Try:

  1. pair an inexpensive connection of headphones in the speaker of your DELL outlet and see if the problem improves.
  2. connect your Dell speakers to another compatible audio device to verify that the speakers are not defective.
  Also visit:
  http://support.Microsoft.com/kb/307918
  Caution:

  Absolutely no warranty express or implied is delivered with this post.  The poster will be held not responsible for any physical, mental, emotional, or financial loss resulting from the use of suggestions or information contained in this message.  Entities who follow the advice in this post are at their own risk.

• All the sounds that are specifically related to the Microsoft system works not-missing the system tray volume control and Accessories Entertainment empty folder.

  I have no volume control icon in the system tray and my Accessories Entertainment folder is empty.  I can play the sound through iTunes and VLC media player but is no longer the Player Windows Media can play CDs or mp3 files.  I have more Microsoft system sounds and the sounds of a large number of online streaming sites no longer play unless I can their route via iTunes or VLC media player.  Windows Media Player says missing codecs if I try to play mp3 files.  I have upgraded to Windows Media Player 11 to see if that would bring codecs, but without any result.

  My problems were not related to the missing CODECS.

  I knew the sound on my system was basically correct, given that I was able to listen to free VLC Player I downloaded to replace the Windows Media Player while he was not working.

  However, the solution to my problem of noise was really simple, but the answer was just very complicated track.

  I noticed that a lot of the chatter about similar problems on other forums was related to Adobe Flash Player.

  I had recently upgraded to the latest versions all Adobe products on my system.  I didn't make the connection that Adobe software could affect all the sounds of Microsoft.

  Finally, after doing a Google search on Adobe Flash Player issues, I found a partial solution:

  Here's an exact quote:

  Very well, the problem is really the wavemapper mapping in the registry of Windows such as reported by a member of the forum.

  All you have to do is to open the registry editor by going to start menu, run, type regedit, then Enter.
  After that, in Registry Editor, navigate yourself in the left pane until you reach

  My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Drivers32

  And then in the pane, right-click and click New, select string value, enter "wavemapper" (without the quotes, of course), ENTER, enter "msacm32.drv".
  Come in.

  Well, of course, it didn't work the first time. I received this message:

  the Registry Editor cannot rename the new value #1. The specified value name already exists. Type another name and try again
  
  I was puzzled for a while, until I saw someone in the forum with a similar problem mentioned that they had found a fix for this problem by granting permissions subkey. This led me to Google search for registry permissions.

  After that here, that's what I had to do, and although it seems that a lot of steps, it's really very simple:

  Once I had reached the drivers32 registry entry I pointed out the entry in the right pane. Mine said (default) REG_SZ (value not set). I then clicked on change on the Bar Menu and clicked on permissions on the menu drop down.

  This opens the permissions for Drivers32. I highlighted at the entrance of the Administration and click the Advanced button.

  This opens the "Advanced Drivers32 security settings. I made sure that I was under the permissions tab in this window. I noticed that the box called "inherit from parent the permission entries that apply to child objects. Include these with entries explicitly defined here"was checked. Yet once, I did ensure that the entrance of the Administration has been highlighted and then I clicked on the button change.

  This opens the "permission for Drivers32 entry. I chose "this key and subkeys" apply to: falling to the bottom of this window. Then, I checked the full control checkbox. I clicked on OK.

  I clicked on apply advanced Drivers32 window security settings.

  I clicked on apply permissions for Drivers32 window.

  Once that I had done it all a lot more entries appeared in the right pane for Drivers32 including my wavemapper entry. This is where all along; Quite simply, there is not all the permissions to do anything, including being in the registry pane.

  I left the registry and now all my sounds are back and the volume icon is once again in my system tray. Who would have thought?

  Hope this helps someone else.

• I can not all the sounds of my Asus A 6000 after installing Windows 7.

  * Original title: sound on asus has 6000

  can someone help me?  I can not all the sounds of my Asus A 6000 after installation of windows 7.

  where can I find the right drivers?

  Thanks John

  There is no native driver Windows 7, but you can download the latest driver available to install in compatibility mode.

  http://www.ASUS.com/support/download/3/41/0/6/17/

  To learn more:

  You can find more information on compatibility modes in the articles below:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

  also check:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly