My DVD Maker 2 will not install the driver from the disk

Similar Questions

• my computer will not install the update of security for Windows XP (KB2481109)

  Moderator before go Note: IE8.
  -----

  my computer will not install the update of security for Windows XP (KB2481109) can you help me.

  Hello

  (a) don't you try to install the update manually?

  (b) you get any error message?

  (c) don't you make changes to the computer until the problem occurred?

  (d) what anti-virus software is installed on your computer?

  I suggest you try the steps below and check if it helps

  Method 1:

  If you have installed a security software on the computer, then I suggest you to temporarily disable a software antivirus installed on the computer and check if the same problem occurs

  Note: Please make sure that you activate the software of Antivirus\Firewall after the test to keep your computer protected.

  Method 2:

  I would say as you try to perform the clean boot and then try to install the update and check if it helps, here is the link:

  http://support.Microsoft.com/kb/310353

  Make sure that return you the computer to a normal startup mode once it's done.

  Additional information: make reference in the link below:

  http://support.Microsoft.com/kb/2481109

  Hope this information is useful.

• iPad Pro will not install the last update of iOS, says that it is not connected to the Internet. It is connected!

  MY iPad pro(9x7) will not install the last update of iOS. I get the message it is not connected to the Internet, but it is connected! I have f

  I istalled the update on my iPhone 6 without Ant problem. I tried switching off and on again, but the result is the same, it will not be installed.

  I just read a post that Apple released the 9.3.2 update for iPad 9.7 Pro. Cannot confirm this, but not me. See post by Phil.

  iPadPro9.7 said that current operating system 9.3.1 will not update 9.3.2

• My computer will not install the last update of security mpam-fex64 [1] .exe. I have__Windows 7 Home premium X 64 based PC. Does anyone have any suggestions?

  My computer will not install the last update of security mpam-fex64 [1] .exe.  I have
  Windows 7 home premium, X 64 based PC.  Does anyone have any suggestions?  Windows gives me the message that the update failed.  I get the error 66 has code.

  Hello sajanclt,

  It is an update of the Forefront client. I suggest you post in the following Forefront Client Forum.
  http://social.technet.Microsoft.com/forums/en-us/category/forefront

  They will be better able to help you.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• GFWL will not install, error comes from wllogin_64.msi

  The other day, I bought several games on steam, but I can't play most of them because they require GFWL.
  When I try to install GFWL (or any direct product that requires wllogin) it always gives me an error.
  Also tried installing wllogin_64.msi manually, but that no longer works. Automatic updates is turned on but will not install the update from the GFWL v3.4.

  Here are the log files,
  setupexe_log: http://www.mediafire.com/?511wbs8u5at3igw
  wllogin_msi.log: http://www.mediafire.com/?ihzwocptd585dnv

  PS: I installed a new copy of windows 7 on a new partition and GFWL installed fine and I can play the games on this copy. Would like to have it work well on my main drive (SSD).

  

  Guys,

  Solution:

  I faced the same problem when installing GTA IV. I have troubleshooted newspapers and found the culprit to be "wllogin_64.msi".

  Seems that we should update the three files in this process;

  http://download.GFWL.xboxlive.com/content/GFWL-public/redists/production/XLiveRedist.msi
  http://download.GFWL.xboxlive.com/content/GFWL-public/redists/production/gfwlclient.msi

  and the third is the wllogin_64.msi

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5E193CFE-F45A-4E29-B6B7-984E7802C639&displaylang=en

  With the gfwlivesetup do not have installed get all these files, download and install manually.

  Now, I could enter the game ;)

  See you soon,.
  Pradeep

• I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

  Help with my computer of dumping

  I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

  If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

• I installed Windows 7 64 bit and then some programs will not install the 64 - bit while telling me that I have a 32 bit OS. How can I make sure I have load a 64-bit version only when there is a choice?

  I have create a new PC and installed Windows & Pro 64-bit. While some offer programs install both 32-bit and 64-bit as a single installation and the installation of the program checks it should install. A few programs installed 32-bit when I said to use the 64-bit. I received a message that I had a 32 bit OS and that it could not install the 64-bit version. How can I ensure that the 64-bit version is always installed when it is available. I have a program that I need it's 32-bit however.

  I also installed Office 2010 and want to know how to check if it installed 32-bit or 64-bit.
  All this is because I'm about to build a new PC for my wife and want to avoid these problems right at the front with it.
  Thank you
  Doug

  If you buy a commercial version of win7 you are provided with the installation dvd of bit versions and a unique activation key. You cannot install both versions.

  Most of the programs will install without problem in a 64-bit version of victory, there is very little that will not be installed on Windows 64-bit.

  You install programs as usual, you don't need to change any settings or install to anywhere other than their default locations. -C' IE you do not manually select the x 86 folder or any other folder.

  If the program you are installing has the ability to install a specific version of bit, and it does not work, then the problem is that options program installers, you must contact the program support

  A retail version of Office 2010 also comes with two versions of ILO.

  Having a 64-bit version of victory does NOT mean that you need to install 64-bit Office, in fact MS recommends that stick you with 32-bit Office (reason being compatibility with various plug0ins Office)

  And of course the 32-bit version of win only supports 4 GB of memory

• HP Pavilion 550-055na: new disk will not install the new operating system

  Hello

  I bought a new HP Pavilion 550 - 055na with Windows 8 a month or two ago but want to use Windows 7. However, I decided that I will keep the hard, the PC came with, and have the option of Windows 8 in future if I want. So, I'm installing Windows 7 on a new hard drive.

  My problem is that the new copy of Windows 7 will not install on my new hard drive.  I get:

  Violation of secure boot

  Invalid signature detected. See the policy in the configuration of secure boot

  Then me to a black screen after I pressed Enter/Ok, who said the following.

  Check the presence of the media...

  Media present...

  On IPv4 PXE boot.

  If I press F12 on power on, I get a blue box asking me to select a boot device. The only options are:

  Realtek PCIe GBE Family Controller IPv4
  

  Realtek PCIe GBE Family Controller IPv6

  and the output by using the arrow keys

  How to change the secure boot strategy?  If I do, it means that I can install my 7 can I on my new hard drive? Also, providing that I do, I always will be able to use my Windows 8 OS drive after changing the secure boot strategy?

  Any help would be appreciated to greately.

  Sincere greetings

  DJ

  Hello:

  You have to enable the legacy mode and disable start-up secured in the BIOS to be able to install and run W7.

  Please see this link to find out where these settings... this references adding a video card, but this is how you change the settings no matter why you need to change.

  http://support.HP.com/us-en/document/c03653200/

• DVD starts, stops, will not play the DVD. No icon on the control panel

  I have a HP G72-B66US laptop. A few days back I burned a DVD - RW, since then the DVD will not play a DVD. It starts, then stops. I uninstalled the drive and reinstalled the driver several times, but when I look at the Device Manager the DVD has the top yellow triangle. I can't use a recovery disk because it will not play the disc drive. Can someone help me on this? Thank you. Is there a place I can download a disk drive?

  Thank you

  DRCSaid

  To resolve this problem, remove the affected filter drivers. To do this, follow these steps:

  1. Click Start, type regedit in the Search box, and then click regedit in the programs list.
  2. If you are prompted for an administrator password or a confirmation, type your password, or click continue.

• new printer deskjet 3511 will not install the full version

  I just bought a new printer a deskjet 3511. I tried for 2 days to get a full installation. I had hp technology works with me all night. I did a full restore. It will not install stll. It downloads that fundamental. I checked my control panel and it does not show a printer is installed at all. Any help would be appreciated. Thank you

  The extracted program him disappears from the screen, is that correct?

  You never see the HP program - DQEX5.exe install screen.

• Pavilion dv6 - 6153cl laptop - will not install the video drivers.

  Recently, a friends Pavillion dv6 - 6153cl laptop started bluescreens frequent (many x 50 on igdpmd64.sys).   (on Win7 64 bit, completely up to date)

  I came across this site and downloaded the current drivers but try as I can, they will not install. The message implies that they are bad drivers, but I have confirmed that they are the 2 parters - driver package AMD, including ATI and Intel drivers for the video "switchable". Most of the AMD install - except the 2 pilots and the C++ package components. AMD checks prior approval from hardware to install and does not renounce it.

  The error is:

  "this computer does not meet the minimum requirements for installing this software.
  or it just keeps trying to install it until it skips this step and goes to the next component, which gives the error the failure at the end.

  I searched this site and found a number of references to similar problems. I've updated the BIOS, all other drivers, removed the old drivers (it is now running on Win VGA drivers), updated part of HP software, run a repair on Windows update and Installer, tried the previous version available, uninstalled C++, cancelled prior unpacking, checked Mode drivers safe, ran HP Support Assistant and tried to manually launch the installation program in compatibility mode admin.

  Windows Update also wanted to update the 2 drivers but who do not. Twice. He will probably try again.

  I ran sfc and Auditor - alls well with the other drivers.

  There is no obvious change that percipitated the question.

  The WinUpdate KB2670838 that sometimes causes a similar error has not been installed.

  The system works at normal temperatures. And it stopped crashing. But only 600 x screen resolution.

  Any suggestions on how to get the drivers to install?

  My friend decided to hold the laptop store as they needed more functional. Of course, they were able to update the video drivers well obviously had a problem with an obscure audio problem. (audio drivers have been included in the package of video driver HP that they perhaps do not use) All is now well and unfortunately I cannot report on what drivers, they used to solve the problem. Thanks for your help, Zak

• Windows 7 will not install the driver for hp deskjet 6540

  I followed all the instructions on the site of HP and windows will not find and install the driver for my HP 6540. How to make Windows do what should or is there a reliable place to download the driver from?

  There is a driver recommended relatively complete for the Deskjet 6540 written by HP and Microsoft via Windows Update.  If the automatic install does not work, perform the following steps: connect the printer by USB.  Click Start, devices and printers, adding a printer, select the appropriate port and when the list of printers, click Windows Update in the lower right part of the dialog box.  It will take a few minutes for the update to complete, once that he choose the Deskjet HP (Hewlett-Packard no) 6500 Series.

  If for some reason you can't use the driver provided through Windows Update, you can download the driver from the Windows Catalog site.  The Windows Catalog site requires the use of Internet Explorer.  For the Dsekjet 6500 Series there are three drivers listed.  11.4 Mo is the x 86 32-bit driver.  11.6 Mb file is x 64 64 bit version.  13.9 MB file is the least common architecture IA64.

• Computer will not install the Windows updates

  I have 6 new updates will not be installed. The updates are for MS Works 9 and MS Office. Acts of the computer as it installs, but the installation always fails and the next day I always shows the same 6 updates waiting to be installed. What can I do to get these updates to install, or at least get rid of them so my computer stop trying to install every night?

  A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatedMicrosoft fix 50461 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/2258121http://snipurl.com/164ypp>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MSFix it 50461.msi.

• Windows Update problem. Will not install the Silverlight security updates

  I'm running the 32-bit version of windows xp service Pack 3. Windows Update: KBs 2514842 and KBs251827 download, but not install I am also running enternet explorer 8. When silverlight trys to install I get a message that it is on a resourse which is not available. I installed Silverlight a few years ago and have not used them. When I try to uninstall also says he's on a resourse which is not available. I opened the Control Panel on my computer and it says that it is there, but I can't seem to load. also have problems with Quicktime with the same problems. Everything else seems ok. I have the free version of AVG antiviris and protection to the current Ad on my computer.

  Hello

  I see you're questions fcaing install KB 2514842 and Ko 251827 "and Quicktime updates.

  What is the full error message?

  Let's try the following and check:

  Step 1:

  You can try the steps from the following link and then check if install updates:

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  http://support.Microsoft.com/kb/2608523

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the in the Windows registry: http://support.microsoft.com/kb/322756

  Step 2:

  Due to QuickTime, you can check this link:

  http://support.Apple.com/kb/HT1925

  I hope that helps!

  If the problem persists, or you need help on Windows let us know.

• My windows update will not install the new version of windows update, I get the error code 80070020 on a 64-bit vista SP2

  My windows update to install a new version of windows update says it acts like it will download and install it then gives me the error code 80070020 and says that my computer is unable to download or install new updates or new version of the windows update. I have a 64-bit windows vista SP2 and my avira antivirus program that has a real-time protection. I tried to do a clean boot upward and tried every possible tip I found on the Microsoft and through suggested methods help panel, I found. My computer has Avira Antivirus that has real time protection I deleted and tried without that somewhere because he said it could be antivirus programs that include real-time protection. Does anyone have advice good?

  Hello

  1. What are the troubleshooting steps correct you did to fix the problem?

  2 did you a recent software or changes to the material on the computer?

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  You can also try the manual steps and check.

  If you follow the manual steps to start the computer in a clean boot state, remember to start the computer in normal mode after you have completed troubleshooting.

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Note: It is possible that some data could be removed if infections are detected.

  Hope this helps and keep us posted.