My Equium A200-1V0 supports WPA PSK encryption security

Similar Questions

• Is WiFi adapter supports WPA - PSK on Equium A100-147 encryption?

  I decided to buy a satellite A100-147, but I would like confirmation that the WiFi adapter supports WPA - PSK encryption. I can't find confirmation anywhere. My guess is that he does, it's a recent machine, but I would be sure.

  Thank you once again.

  Doug

  Hello

  I m not 100% sure what wireless network adapter has been installed on this unit but I think it might be to use an Intel Wireless 3945ABG card.

  The Intel PRO/Wireless 3945ABG card supports WPA, WPA2, WPA - PSK encryption. I found this info on the Intel site. You should also check it.

  But as I said above, I m not 100% sure about the Wlan card. To my knowledge, several series of laptops come with different hardware configuration. This means that different wireless network cards can be used in notebook.

• Equium A200-1V0: is it possible to create a new Toshiba Recovery CD

  Hello

  I just wanted to know on Equium A200-1V0 I'm able to make the recovery CDs and DVDs?
  I just found this link (http://209.167.114.38/support/TechSupport/TSBs/ALL/-TSB001019.htm) that if I choose option 3 does that mean you can make CDs recovery and recovery dvd. This recovery method apply to Equium A200-1V0?

  Second thing, it is that someone can tell me what type of card mother Equium A200-1V0, if possible to his specifications.

  Last thing. When this model was released?

  Well, I have this laptop but will buy the first week of the new year. Just do a little research.

  Help with this will be appreciated.
  Thank you.

  Post edited by: sam23

  Hello

  Don t think you will be able to create an own Toshiba Recovery CD.
  In the document of Toshiba, you can see this info:

  Only templates that come with it "Toshiba HDD Recovery Utility" (ie: Tecra A2)

  It seems that the Equium A200 was already delivered with the Toshiba Recovery CD and you have no need to create a new.
  The procedure described above applies to the Toshiba laptop computer which were delivered without the recovery CD

  Best regards and happy new year ;)

• Equium A200-1V0 - recovery on the new HARD drive problem

  Hello

  Hoping someone can help, I just mounted a new Toshiba 1 TB hard drive for my Equium A200-1V0, used the Vista came with the computer recovery disk, everything seems to be installed ok, but when you try to start, I get a message saying that Windows Vista is unable to run on this hardware. Any suggestion is appreciated.

  Thank you

  There must be a compatibility problem. Usually the hard drives up to 500 GB are not problematic for the old machines.
  If possible, try to install the version of the OS. When you can get Win7 32 bit would be great. Win7 32-bit is supported for your machine and in my view, it will work perfectly.

• Equium A200-1V0 using XP - recent conversion issues.

  * Hi, *.

  * I recently inherited my laptop the girls, he had vista installed on it. I'm not a big fan so decided to install xp. I found a great guide on the forum, see below, (the topic is now locked) *.

  The original guide:

  + How to install XP Home on the following Vista laptop. 05/01/08 +.
  + PSAF5E + Toshiba Equium A200-1V0

  + Introduction
  + Here are the measures taken by us to remove our Toshiba laptop Vista and replace it with XP Home. There may be inconsistencies in our methods and we cannot have all the correct drivers installed, but everything seems to work OK for us. +
  + Our laptop now runs much faster, opens and closes more quickly and is more stable. +

  + This isn't a 5 minute operation. It should not be attempted by anyone with only a knowledge of passage of computers because it is very easy to screw things. The shop you bought your PC against them will load a lot to fix things and they will probably insist reinstall Vista! +
  + Be prepared that this would also probably negate your warranty. +

  + Luckily, I have a 2nd PC under XP, which allows me to access the web. This is very useful because it means that when your Vista machine is "broken" you can always find help and download the driver files. I also used my 2nd PC to create the XP installation updated the CD discussed later. +
  + You must have access to the web via a PC or another to get the necessary drivers. +

  + Method +.
  + First, even if you have Vista on your laptop, download and run a program of interrogation as "Belarc advisor" that lists all the drivers and software installed on your laptop. Print it out for future reference. It will be useful later when searching on the web for all drivers that may require updating. +
  + Now, make sure that you noted on all the necessary settings for your Internet connection. +
  + Also, back up the files that you may have placed on the hard drive you will lose the lot, including emails and the address books and web bookmarks etc. +

  + Unfortunately, the Toshiba disk that comes with this laptop does not appear to have all the required drivers with it. Instead, I think it relies on Vista keeping copy on your hard drive. It's not very bright that when the disk fails, you have lost everything! +
  + This means to go on the web and the search of all the required drivers run the XP successfully. +
  + Some we have found, for example the wireless network adapter, however this was not a problem because once we had installed XP and connected to the Internet through an Ethernet cable to our router, we were able to run 'Update Driver' for each missing item. +
  + Go to "Device Manager" via "Control Panel" then "System" and then "hardware". Then look for any yellow question mark for all the problems. Right-click and run 'Update Driver' for the Hardware Update Wizard and allow the PC to search the web "this time only. +
  + The ones we made in this way were: wireless adapter, Audio adapter. +

  + Unfortunately an original CD of XP SP2 does not contain the required drivers for this laptop. Therefore, when you start the CD it will be, after a few minutes of installation of files, say you have a hardware problem, there is no hard drive. +
  + To remedy this, you will need to download the right drivers Intel ICH8M SATA AHCI Controller. I could not find on the website of Intel, but on the contrary searched on Google for him. and he got to: http://www.alphadownloads.com/downloads/download-hp-intel-sata-ahci-controller-driver-ver--d-3064.html+

  + The other necessary drivers that we found on the web were: +.

  + Intel chipset device software installer +.
  Web page +.
  + http://downloadcenter.intel.com/Detail_Desc.aspx?agr=N&ProductID=816&DwnldID=14528 & strOSs = 45 & OSFullName = Windows * XP Home Edition & lang = eng +.

  + Or if this link does not try this: +.

  + http://support.intel.com/support/chipsets/inf/sb/CS-021273.htm+

  + Select 'Download Intel chipset software installation utility' on the left side, and then select your operating system "XP Home +.
  + Select "INF Update Utility - primarily for Intel 3, 900 chipset series ' +.
  + and download it. +

  + Driver Intel graphics: Mobile Intel (r) 965 Express Chipset +.
  Web page +.
  + http://downloadcenter.intel.com/Detail_Desc.aspx?agr=N&ProductID=2800&DwnldID=1438 8 & strOSs = 45 & OSFullName = Windows * % 20XP % 20Home % 20Edit ion & lang = eng +.

  + Or if this link does not try this: +.
  + http://support.intel.com/support/graphics/intelgm965/+

  + Now, select "software & drivers" on the left side and select your operating system "XP Home +.
  + You will be presented with a list of files. +
  + Select provided? ® Graphics Media Accelerator Driver for Windows * XP (exe) +.
  + and download it. +

  + Marvell Yukon Ethernet Driver +.
  Web page +.
  + http://www.marvell.com/drivers/driverDisplay.do?dId=175+

  + Or if this link does not try this: +.
  + http://www.marvell.com/drivers/search.do?reload=false+
  + On the right side, select ' W2000 / XP/2003/Vista x 86 & x 64 multilingual Installer (32-bit and 64-bit) for Yukon devices +.

  + Create the XP drivers disk +.
  + Add SATA drivers for a copy of your XP install CD using a program such as NLite. +
  + You have enough spare memory hard drive take a copy of your XP (about 700 MB) installation CD. +
  + Launch the program "sp37005.exe" and it will install on your hard drive. Do not install to a floppy disk. +
  + Download "NLite" of: http://www.nliteos.com/download.html+
  + When you run NLite it will probably say that you need to install ".net Framework", if so, quit NLite and go find the program. It is a Microsoft program that you can find by performing a Google search for the corresponding page on the Microsoft Web site. +
  + Now place your drive to install XP in your CD drive, if it autoruns, leave him. +
  + Run Nlite and follow the instructions on the screen. +
  + The program will ask where is your XP disk then it will ask you where you want to save the copy. +
  + On the screen "Task Selection", select "Drivers" and "Bootable ISO". Press "next". +
  + Select "Insert" and then "Folder pilot several" and now go and find your downloaded files of the SATA driver. Now, select 'All' and ' OK. The program will list the available SATA drivers. Select only the two that mention "ICH8M. Now press "next". The display will show the selected drivers. Press 'Next' and then 'Yes' to the prompt and then on "next" when done.
  + You are presented with the "Bootable ISO" screen. +
  + Put it a new inflammable CD in your CD burner, wait for it to be recognized and out any window that might appear to allow you to install files.
  + Now in Nlite, under "Mode", select "Direct Burn" +.
  + Under the 'Label' enter something like "XP for Toshiba Satellite A200" to identify the drive. +
  + Advanced settings to leave alone and now add the other required drivers by clicking on explore and copy them to the root directory to the temporary directory on your hard drive XP. It might be better to create a "Drivers" folder in the root directory to make them easy to find later. +
  + Now, click on the "Burn" button Now follow the remaining instructions to complete. +
  + You have now created an XP installation disc that contains your SATA drivers. +
  + - As you can tell, it of sound altogether, but avoids having to buy a USB floppy drive and it provides a neat solution. +

  + Hasta La Vista! +
  + Now you are ready to start the cleaning process, if you are brave enough to continue... +.

  + First, re-boot your laptop and the all start-up press F12 to change the boot order so that the CD-ROM/DVD-ROM is first. You can also use F2 and then change the Boot order from there. +

  + Now, insert your new XP installation disc in the DVD/CD drive and re-boot the PC, select boot from CD when you are prompted. +

  + The XP CD will now start copying the files and possibly display an options screen.
  + Select this option to install Windows. +
  + And then remove the hard drive C: partition (with Vista on) +.
  + Delete the partition used by Vista also F. +.
  + You will have to follow a lot of warning messages to delete the partitions. +
  + Now follow the instructions to create an NTFS partition on the C drive. +.
  + Now install XP by following the instructions. +

  + Don't worry that the graphics are a bit large as once Windows has finished installing, you can run the graphics driver you copied on the the XP CD to correct this. +

  + Run three driver files: +.
  + win2k_xp14311.exe Intel graphics driver.
  + INFINST_AUTOL.exe Intel chipset software installation utility ' +.
  + Marvell Yukon Ethernet Driver Setup.exe +.

  + Your graphics card must now improve and you should now be able to connect to the web (after the execution of the web Setup Wizard). But do not do this until you have installed your anti-virus software and firewall. +

  + Now go to "Device Manager" by "Control Panel" then "System" and then "hardware". Then look for any yellow question mark for all the problems. Right-click and run 'Update Driver' for the Hardware Update Wizard and allow the PC to search the web "this time only. +

  + If all goes well, everything should work OK now. +

  + Now go and have a drink to celebrate! +

  * After completing the installation, I found that I had no work wlan driver on my laptop. They are here (RTL8187B_WLAN_Adaptor), but with a big yellow question mark. I tried reinstalling them but it made no difference. I don't know why they don't will be will not installed properly.*

  * All went well and seem to work and all the familiar screens were there. I started using it and wanted to transfer some info from the laptop to my office. I copied the files on a disc using Ashampoo Burning Studio 7 and it seems to work, he went through the whole process without a hitch. When he had finished I checked the drive and it was empty he had no files on it at all. I tried several types/brands but the results (or lack of) is the same. The drive reads the discs will not drive write. Any ideas? *

  Thanks for reading this and I would appreciate any help/advice you may have.

  See you soon,.

  Mike

  Hello

  This means that everything is working properly without WLAN connection and burning the discs?

  Well, are you sure that your laptop is equipped with RTL8187B WLAN card? Therefore, you can check the vendor and device ID in Device Manager.
  But for all the portable Toshiba, you can download the driver WLAN here:
  http://APS2.toshiba-tro.de/WLAN/

  In addition, it would be interesting to know which drive you exactly used for the engraving process. I only use high-quality Verbatim and TDK media. I don t use Ashampoo or Nero, I use CD Burner XP because it the freeware tool and I can do anything I want with this program.

  Check it!

• Equium A200-1V0: can not play Holy gold game

  I just bought an Equium A200-1V0 and installed the sacred gold game but when I try to play the game it comes up with the error message that there is no disc in the disc drive.

  Even when I try to start the game from the disc instead of the shortcut on the laptop.
  Someone has encountered similar problems and found a solution?

  Have you installed it correctly?
  How about you, the possibilities of support from manufacturers of game?
  Maybe it's a known issue and a patch is available

• Noisy hard drive Equium A200-1V0

  I recently bought an Equium A200-1V0 with Vista installed.
  I got it two weeks, I have barely any software, but HDD is impregnated with a really annoying crackling sound.

  It is not only during startup, even for the simplest of programs, such as word, brands of hard drive of my laptop this incessant crackling noise.
  I thought that the laptops are supposed to be quiet.

  Is - this usual?

  > I thought laptops are supposed to be quiet.
  ;) not. You can't say that all laptops must be altogether. As you know there are a lot of series of laptops that is designed for the different areas of work.
  For example: professional laptops are quite little, and don t support the high performance devices like for example graphics card to play games, but a X 200 was desigened to the game and it is much noisier because of high performance devices.

  However, to the noisy HARD drive
  I have 2 different laptops. Drives my M40 of Sam makes strange noises, but it works very well, so in my case I would exclude a hardware problem

  But who knows, maybe you HDD starts I have malfunction would recommend shows the additional HARD drive activities and to safeguard important data.

  Best regards

• Equium A200-1V0 - service the user profile Service has no connection

  Hey, wonder if anyone can help me.

  My laptop is not letting me log in the profiles of each user, a message keeps coming up saying 'the user profile Service service has no connection. User profile cannot be loaded. »

  I can fix anyone know? A got a Toshiba Equium A200-1V0 if that helps.

  See you soon.

  See this MS knowledge base article:

  + Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. User profile cannot be loaded.
  http://support.Microsoft.com/kb/947215

  This seems to be a known issue of Windows and you can correct that running the Microsoft Fix this problem Microsoft Fix it 50446

  Welcome them

• Equium A200-1V0: DVD-RAM UJ-850 s does not read data discs

  My laptop seems to have decided to stop reading data disks.
  However, there is no problem with the audio CD, but when I insert a data disc such as the software considers the disk is empty and try to format the drive.
  I searched internet day for solutions and tried without success to the following:

  Removed the UpperFilters and LowerFilters in the registry.
  Uninstalled and reinstalled drivers.
  Bought DriverWhiz (waste of money!)
  Tried to access disc command prompt that generated the message "incorrect function".
  Tried to use the enforcement function and access an exe file that I know is on the disk, but it comes up saying I need to format the drive
  Uninstall service packs
  I even thought it might be something to do with the MagicVirtual drive I had installed so I uninstalled completely which
  I uninstalled real player

  I'm about 3 minutes to destroy my laptop so any help would be appreciated.

  Laptop: Equium A200 - 1V0
  Drive DVD - RW: MAST * a DVD-RAM UJ-850 s ATA
  OS: Windows Vista

  Hello

  Deleting upper and lower filters was the first idea that I'd like to share with you, but it seems that you have already tried this solution proposal

  How about windows boot CD or a linux live CD?
  Is this possible?

  If not then I thing that the question could be linked to the wrong material work I m thinking on the issue of laser lenses eventually the laser lens can not calibrate properly and this could be a problem

  In this case, only a replacement CD/DVD drive can help greet

• Equium A200-1V0 - freezes after plug power supply AC?

  Hi all

  I'm trying to find the solution of the problem:

  My laptop Equium A200 1V0 freezes as soon as I plug the power running. I tried the new battery and new AC adapter after reading some solutions of the internet but so far without success. It works fine without the plug'in ac, but as soon as I join to food it freezes and I have to force the shutdown of the machine which is not good.

  I would be very grateful if someone can give me please the solution in detail the problem mentioned above and also let me know the cause of this disorder as well?

  Thanks for reading this thread and for your efforts.

  Kind regards

  pat3l

  Hey,.

  You use an AC/DC to original Toshiba adapter? In my view the problem must be related to AC/DC adapter or the motherboard itself

  Important is that you use Toshiba parts only to test with an AC/DC to original Toshiba adapter. If it doesn't work, it seems that the motherboard is faulty. These serious physical issues can only be set to an authorized service then you should contact the guy and ask for help. ;)

• On Equium A200-1V0 unknown BIOS password

  Hello

  I have an Equium A200-1v0 when turned to is ask a password of bios for which I have not so how do I solve this problem.

  markb68

  The BIOS battery has nothing to do with the BIOS password so don t spend your time disassembled. It can happen that do you some damage.
  I put t know how much it costs but if the laptop works well it is a worth paying. This old A200 is not bad machine and works perfectly with Win7 32 bit so that you can use next years without problem.

• Equium A200-1V0 - need advice for the new series of laptop

  I want to replace my Equium A200-1V0.
  I don't know not in range it originally was - base or more?

  What would be a good replacement for it now?
  What I use my current for internet, email, Word/Excel and simple games. I also use it to listen to the music and the iplayer.
  HD, also used to store photos and iTunes.

  I have a budget of about £300-£400
  Minimum specification of:
  Memory - 2 GB
  HD - 200 GB
  Intel processor - NOT a Celeron - duo or preference i3
  stereo speakers
  at least 2 USB ports
  HDMI port - optional
  Screen 15 ''

  Thanks in advance...

  Hey,.

  There are several laptops Toshiba with 15 screen I think that the important point is the price because other requirements such as 2 GB RAM, 200 GB, etc are no problem. Most laptop have 4GB or more of RAM and also tough with more disk space.
  Moreover the Intel Core i3 processor is standard CPU at the moment, some models have a Core i5

  Take a look at Satellite C650, L650 and L750. These models are to fundamental factors such as Internet, music, videos and simple games.

  You can compare all models on the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com/innovation/family/

• Equium A200-1V0 - USB ports power

  On Equium A200-1V0, there are two USB 2.0 ports, is there power 5V 0, common to the two ports or separated from 0, 5V powersuply for each port?

  Thank you

  500mA is a standard USB. All manufactured goods that create devices USB knew this and must follow the rules.
  If a USB port is not enough then the speaker manufacturer should include a USB cable to the two USB ports.

• Equium A200-1V0 - cannot create the hibernation file

  Equium A200-1V0, Vista Home Premium (SP2)

  Hibernation has disappeared recently. I just did a cleaning disc. I have tried to go to the command prompt and enter powercfg / hibernate on, but I get a message saying that the system could not create the file of hibernation with a specific error code: 0xc0000022.

  Suggestions, please?

  Thank you.

  Hi Peterspragge,

  You have enabled hibernation in Vista power management?
  What happens if you press the FN + F4 key combination to enter hibernation mode?

  I never had a problem with the Hibernate in Windows mode and I think that his Microsoft more related question.
  Have you looked on the forums of Microsoft solution possible?

• Equium A200 - 1V0 with XP Professional software - looking driver for 3G

  We have recently installed XP on an Equium A200 - 1V0 but can't find the right driver to connect to 3 G internet.
  Any suggestions gratefully received!
  Zoe.

  Please can you tell us how you want to connect to the internet using 3G?
  It is unclear to me that your laptop is the 3G module inside. Can you confirm this please?

  I'm afraid you have misunderstood something and 3G can be used with an external display only.