On Equium A200-1V0 unknown BIOS password

Similar Questions

• Re: Equium A200-1V0 using XP - Lan driver needed

  I am new to this (and other) forum apologies if this has already been answered.

  I had an Equium A200-1V0 that came with Vista Home installed. (As a working machine) asked me to install XP Pro on it instead of Vista.

  Now I have ALL the drivers loaded and working with the exception of the Ethernet controller. I am at a total loss what to do I tried all I can find the drivers of which some of the Vista ones.

  I can't determine if it is integrated into the motherboard or attached via PCI. I can't find any panel below to switch to a different PCI even though she might be under the keyboard (hated to take it apart too much yet).

  Any help would be greatly appreciated.

  The A200-1VO belongs to the PSAE6E series.
  Please choose this series to install LAN driver!

  Just a note; The laptop was equipped with the Realtek(10/100M) LAN chip.
  If you wish, you can test a LAN driver on the Realteck site.

  PS: If you use XP on this laptop Vista you must update the BIOS to the XP version.
  It is very important to ensure that some laptops additional features will always be available and will work using the XP operating system.

• Equium A200-1VO: update Bios issue

  Someone at - it updated the Bios here with the latest offer.
  I wanted to do because the port for express adapter card seems to not work properly.

  But all I get is an error message - 120 of Winphlash saying the Bios is incorrect, but I downloaded it twice and double checked each stage.

  Equium A200-1V0 seems to belong to the series of PSAF5.
  Have you downloaded the BIOS for this series?

  In addition, you can check the label at the bottom of the unit. You should see the serial number too.

  By the way; I put t think that the BIOS update will solve the problem of port adapter express card.
  I put t know exactly what the problem is, but if you use the compatible and fully support the express cards then everything should function.

  Best regards

• Equium A200-1V0: is it possible to create a new Toshiba Recovery CD

  Hello

  I just wanted to know on Equium A200-1V0 I'm able to make the recovery CDs and DVDs?
  I just found this link (http://209.167.114.38/support/TechSupport/TSBs/ALL/-TSB001019.htm) that if I choose option 3 does that mean you can make CDs recovery and recovery dvd. This recovery method apply to Equium A200-1V0?

  Second thing, it is that someone can tell me what type of card mother Equium A200-1V0, if possible to his specifications.

  Last thing. When this model was released?

  Well, I have this laptop but will buy the first week of the new year. Just do a little research.

  Help with this will be appreciated.
  Thank you.

  Post edited by: sam23

  Hello

  Don t think you will be able to create an own Toshiba Recovery CD.
  In the document of Toshiba, you can see this info:

  Only templates that come with it "Toshiba HDD Recovery Utility" (ie: Tecra A2)

  It seems that the Equium A200 was already delivered with the Toshiba Recovery CD and you have no need to create a new.
  The procedure described above applies to the Toshiba laptop computer which were delivered without the recovery CD

  Best regards and happy new year ;)

• Satellite A200 - 1 GB BIOS password request

  Hi all

  to date, I have replaced my old battery and I saw my laptot to request a bios password.

  I don't know what happends excactly because I never use any pass in my pc.

  Could someone explain to me what is happening?

  PS: I already talk with the Greek customer support but... never mind.

  Thanks in advance

  Unknown BIOS password can be removed by an authorized Toshiba.

• Equium A200-1V0: DVD-RAM UJ-850 s does not read data discs

  My laptop seems to have decided to stop reading data disks.
  However, there is no problem with the audio CD, but when I insert a data disc such as the software considers the disk is empty and try to format the drive.
  I searched internet day for solutions and tried without success to the following:

  Removed the UpperFilters and LowerFilters in the registry.
  Uninstalled and reinstalled drivers.
  Bought DriverWhiz (waste of money!)
  Tried to access disc command prompt that generated the message "incorrect function".
  Tried to use the enforcement function and access an exe file that I know is on the disk, but it comes up saying I need to format the drive
  Uninstall service packs
  I even thought it might be something to do with the MagicVirtual drive I had installed so I uninstalled completely which
  I uninstalled real player

  I'm about 3 minutes to destroy my laptop so any help would be appreciated.

  Laptop: Equium A200 - 1V0
  Drive DVD - RW: MAST * a DVD-RAM UJ-850 s ATA
  OS: Windows Vista

  Hello

  Deleting upper and lower filters was the first idea that I'd like to share with you, but it seems that you have already tried this solution proposal

  How about windows boot CD or a linux live CD?
  Is this possible?

  If not then I thing that the question could be linked to the wrong material work I m thinking on the issue of laser lenses eventually the laser lens can not calibrate properly and this could be a problem

  In this case, only a replacement CD/DVD drive can help greet

• Equium A200-1V0 - freezes after plug power supply AC?

  Hi all

  I'm trying to find the solution of the problem:

  My laptop Equium A200 1V0 freezes as soon as I plug the power running. I tried the new battery and new AC adapter after reading some solutions of the internet but so far without success. It works fine without the plug'in ac, but as soon as I join to food it freezes and I have to force the shutdown of the machine which is not good.

  I would be very grateful if someone can give me please the solution in detail the problem mentioned above and also let me know the cause of this disorder as well?

  Thanks for reading this thread and for your efforts.

  Kind regards

  pat3l

  Hey,.

  You use an AC/DC to original Toshiba adapter? In my view the problem must be related to AC/DC adapter or the motherboard itself

  Important is that you use Toshiba parts only to test with an AC/DC to original Toshiba adapter. If it doesn't work, it seems that the motherboard is faulty. These serious physical issues can only be set to an authorized service then you should contact the guy and ask for help. ;)

• Equium A200-1V0 - need advice for the new series of laptop

  I want to replace my Equium A200-1V0.
  I don't know not in range it originally was - base or more?

  What would be a good replacement for it now?
  What I use my current for internet, email, Word/Excel and simple games. I also use it to listen to the music and the iplayer.
  HD, also used to store photos and iTunes.

  I have a budget of about £300-£400
  Minimum specification of:
  Memory - 2 GB
  HD - 200 GB
  Intel processor - NOT a Celeron - duo or preference i3
  stereo speakers
  at least 2 USB ports
  HDMI port - optional
  Screen 15 ''

  Thanks in advance...

  Hey,.

  There are several laptops Toshiba with 15 screen I think that the important point is the price because other requirements such as 2 GB RAM, 200 GB, etc are no problem. Most laptop have 4GB or more of RAM and also tough with more disk space.
  Moreover the Intel Core i3 processor is standard CPU at the moment, some models have a Core i5

  Take a look at Satellite C650, L650 and L750. These models are to fundamental factors such as Internet, music, videos and simple games.

  You can compare all models on the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com/innovation/family/

• Equium A200-1V0 - USB ports power

  On Equium A200-1V0, there are two USB 2.0 ports, is there power 5V 0, common to the two ports or separated from 0, 5V powersuply for each port?

  Thank you

  500mA is a standard USB. All manufactured goods that create devices USB knew this and must follow the rules.
  If a USB port is not enough then the speaker manufacturer should include a USB cable to the two USB ports.

• Equium A200-1V0 - cannot create the hibernation file

  Equium A200-1V0, Vista Home Premium (SP2)

  Hibernation has disappeared recently. I just did a cleaning disc. I have tried to go to the command prompt and enter powercfg / hibernate on, but I get a message saying that the system could not create the file of hibernation with a specific error code: 0xc0000022.

  Suggestions, please?

  Thank you.

  Hi Peterspragge,

  You have enabled hibernation in Vista power management?
  What happens if you press the FN + F4 key combination to enter hibernation mode?

  I never had a problem with the Hibernate in Windows mode and I think that his Microsoft more related question.
  Have you looked on the forums of Microsoft solution possible?

• Equium A200 - 1V0 with XP Professional software - looking driver for 3G

  We have recently installed XP on an Equium A200 - 1V0 but can't find the right driver to connect to 3 G internet.
  Any suggestions gratefully received!
  Zoe.

  Please can you tell us how you want to connect to the internet using 3G?
  It is unclear to me that your laptop is the 3G module inside. Can you confirm this please?

  I'm afraid you have misunderstood something and 3G can be used with an external display only.

• Equium A200-1V0 - just freezes very often

  I have a problem with my Toshiba Equium A200-1V0. It freezes just very often to watch movies, browse the net or just listening to music and it makes a strange noise like when winamp freezes, but the music is still playing.
  I have windows 7.

  What can I do? SRY for my English

  Hi eidrian88,

  I think that it of difficult to say something because it can be everything... I want to say that no one knows what you have installed exactly so it could be a software or a hardware problem.

  In my opinion the best way to identify the exact problem is reinstall with the Toshiba recovery disc. It will restore software factory with all the drivers and tools. If these settings are pre-tested and should work correctly.

  Otherwise it might be a hardware malfunction and an authorized service provider can verify this.

• Equium A200 - 1V0 DVD Player error impossible of video output to an external device

  Hello
  I use my Equium A200 1V0 laptop with Vista Home Premium, and whenever I try to watch a DVD using the preinstalled Toshiba DVD Player software, I get the following error...

  "Unable to video output to an external device. Please spend your
  display the buttons on the unit by pressing the Fn + F5 after the end of the application. »

  I do not have an external monitor, and have never had a. (By pressing the Fn + F5 buttons does not work, because...) I have not attached external devices!)
  The software used to work properly, and I have not changed the settings at all.

  I have now tried to reinstall with the latest download from Toshiba, but the problem remains.

  Any thoughts would be accepted with gratitude.

  Bufster

  Hello

  I found a boyfriend of the solution.
  How?

  I searched simply here in the forum and found this thread!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726

  Jack Black has posted a link to a useful Toshiba doc that says that this error is related to the Realteck sound driver.

  Update the audio driver and you must solve this problem!

• Equium A200-1V0 - recovery on the new HARD drive problem

  Hello

  Hoping someone can help, I just mounted a new Toshiba 1 TB hard drive for my Equium A200-1V0, used the Vista came with the computer recovery disk, everything seems to be installed ok, but when you try to start, I get a message saying that Windows Vista is unable to run on this hardware. Any suggestion is appreciated.

  Thank you

  There must be a compatibility problem. Usually the hard drives up to 500 GB are not problematic for the old machines.
  If possible, try to install the version of the OS. When you can get Win7 32 bit would be great. Win7 32-bit is supported for your machine and in my view, it will work perfectly.

• Equium A200-1V0 - how to use the Toshiba Recovery CD product?

  I used the reinstall xp on desktop before but do not need to do a reinstall on your laptop (toshiba) with vista with their product recovery disc. With vista, I had to find my own drivers etc. after the OS is installed on a clean drive.

  I want to clean the disc by using a product of drive wipe as Dariks boot and nuke (used on office/xp computers some time and as a very clean before you reinstall drive) on my laptop Toshiba Equium A200-1V0 before inserting the product recovery cd.

  Questions-
  (1) is it ok to erase drive with DBAN - this usually effect the ability of the recovery CD to do its job?
  (2) how can I use the product recovery cd or it is free it is exposed just charge, boot from the cd and follow the instructions online?
  (3) it will return the laptop to the factory shipping status (i.e. don't have no need to look for the drivers, etc.)?

  Thank you very much for your help - just need to be reassured that have not is it a wipe and reinstall on your laptop and vista with a "recovery disc" (always a disc not specify that it is a full copy of the operating system

  James

  Hello James

  The recovery procedure everything is very simple and here are the answers to your questions:

  # You should not do. Before installing recovery starts the disk HARD integer will be automatically formatted, created new partitions and OS will be installed on the first
  # Start Notepad and press F12 repeatedly to enter the boot menu. When the menu is displayed a recovery media in the optical disc drive. In the menu choose the CD/DVD drive and press ENTER. Follow the meny on the screen. After that two or three click OK installation will be implemented.
  # Yes

  When the installation is complete just start computer laptop again and wait until the operating system will be prepared for the first start. It is not necessary to install any additional software.