My external hard drive Vervatim 47535 will not work.

I am running Windows 8 pro and after some problems where my counter top would not come on I have unplugged the machine and then plugged in again.  Since then, my disk drive hard verbatim is not recognized.  I was in disk management and the drive does not appear.  When I look at the verbatim the switch is off, but there is no light next to HARD drive or a net.  I do not always have the verbatim plugged into the machine and it was not plugged in when I disconnected the office.  Can someone help please I have not run a return for weeks because the Verbatim does not work.  Thank you.

Hi Julie,.

Thanks for the reply.

As mentioned by "slance310", the unit may be damaged because of the failure. Because the unit is not getting recognized in the other computer, it is recommended to contact the manufacturer of the hardware for more information.

http://www.verbatim.com/support/

Hope this information helps.

Tags: Windows

Similar Questions

  • file .avi and .mov on iMac changed in .m4v when they are copied to the external hard drive. I will be able to open these files on other devices like a Windows PC?

    file .avi and .mov on iMac changed in .m4v when they are copied to the external hard drive. I will be able to open these files on other devices like a Windows PC?

    FWIW, do not change the extensions of file simply by copying the files to an external drive.

  • When I install windows 7 on an external hard drive a message will be appear "windows is unable to install any usb drive.

    When I install windows 7 on an external hard drive, a massage will appear "windows is unable to install any usb drive. tell me how to solve this problem.

    Original title: installation problem

    Windows 7 may not be the installation of a device from external storage such as a hard drive external or USB Thumb drive (with the exception of eSATA).

    You must install Windows 7 on a storage attached internal device.

    http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  • I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

    I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

    Hello

    1. do you get any error code or error message?

    2. what day you installed recently?

    It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

    Follow the steps to uninstall and re-install the drivers.

    a. click on start toreduce this includes this im and then click Control Panel.

    b. click system and Maintenance, click Systemand then click on Device Manager.
    Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

    Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

    c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

    d. When you are prompted to confirm that you want to remove the device, click OK.

    e. restart the computer.

    If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

    Hope the information is useful.

  • Since I downloaded El Capitan I think I can't paste it into my external hard drive.  I use to download my card reader, copy it, and then download to a new folder on the external drive.  It will not work now and nor can I create new folders on the hard dr

    I used to download pictures from a card reader, copy them, and then stick it on my external hard drive.  Since El Capitan of download, it does not work - I can download and copy, but can not stick to the external hard drive.  I can't set up the files on the external hard drive either.  However, I can download what is already on the external hard drive without any problem.

    How the external drive is formatted?

  • Photos of my drive external hard of my XP will not download on Windows 7

    I'm having a problem with my Windows 7 too. TOO MUCH SECURITY!  I tried all day to get the pictures on my external hard drive in our new computer, but he rejects every time. Its a hard drive universal that should work with any computer!

    My husband & I both use the same name of the administrator to avoid problems. HA! I went through security as I was told that repair permissions. It makes no difference. We have the characteristics of supported file on the computer that must be compatible with our photos on the external hard drive.
    So really I have no idea why the pictures won't load on the computer.

    I'm having a problem with my Windows 7 too. TOO MUCH SECURITY!  I tried all day to get the pictures on my external hard drive in our new computer, but he rejects every time. Its a hard drive universal that should work with any computer!

    My husband & I both use the same name of the administrator to avoid problems. HA! I went through security as I was told that repair permissions. It makes no difference. We have the characteristics of supported file on the computer that must be compatible with our photos on the external hard drive.
    So really I have no idea why the pictures won't load on the computer.

    =====================================
    Just a question...

    If you connect the external hard drive via USB cable for
    your Windows 7 computer... Close all windows that can
    Open... and then go to... Start / computer...

    The external hard drive is recognized by a drive letter?

    If_yes_can you left click this drive letter and show the
    Directory of files from external hard drive?

  • 160 GB external hard drive of Gigastore is not recognized correctly

    Hi, hope someone can help me!

    I bought a 160 GB external drive Gigastore hard today, but the plug inside, the computer did not recognize it. In fact, nothing happened. I tried all the usual as control to see if it was in my computer and then right click my computer, manage, etc computer management, but again, she did not show. I tested it on another pc and still does not work. I'll put up the wires correctly, so this isn't the issue.

    When I turn on the power, the hard drive light constantly flashes blue. I would have thought that will be that the hard drive has been slowed down, that he would stay on continuously without blinking. Could someone let me know if this blinking determines that the disk does not just and it is indeed tired?

    Phil

    Hello

    It seems that it s not a laptop fault because the other laptop or PC can not recognize the external HARD drive.
    Have you checked if some additional drivers or tools were shipped with this external HARD drive device?
    If please connect the HARD drive and use the Add Hardware option

  • Is it possible to extract personal folders from my hard drive and transfer to an external hard drive if Windows does not start?

    Hello, I recently started my Windows XP Dell computer and it should start up normally unless it would run the ChkDsk utility. It would freeze then 68% on stage 1 and goes no further. I called the people of Dell and after trying so many solutions, including safe mode, safe mode with network and CommandPrompt, we ran the diagnosis. The hard drive and memory are fine, no errors. He concluded that it was the operating system and must be restored. However, I have important files, I need to extract from my hard drive and he recommended me an external hard drive. I bought it, but now I'm not sure how to extract my files from my drive hard if Windows can not even boot the desktop computer. Is it possible to extract these files without the use of the desktop computer?

    And you've burned the .iso image, and not as data? If Yes, then you have created a bootable CD. Put it in your optical drive and restart the computer. You may need to change the boot order in your BIOS. With some machines, you can get a temporary startup command menu by pressing a function such as F12 at startup. Other computers require that you enter setup and change the boot order in the optical drive first of all from there. When you start your computer it will be information about which key press to enter the BIOS (Setup) or give you the temporary boot order.

    After you changed the boot order to boot first from the CD and rebooted the computer, Knoppix will boot. Have your external hard drive connected to the computer before you start doing this. After Knoppix is finished booting, you will be in his office. It will be very similar to Windows. There are icons on the desktop for your internal hard drive and the external hard drive. Copy files from the internal to the external drive as you want. Review what I wrote about the use of Knoppix in my previous answer. MS - MVP - Elephant Boy computers - don't panic!

  • External hard drive detects but does not open without formatting

    I can't open my external hard drive. In computer science, it shows just K of disk space, but there is no reading of storage. It says 0 bytes of free space and used as 0 bytes space as it will not be open until I have format. Any kind of help, please let me know. Its a backup disk that have been most hard, though don't know if its of any help.

    Hi Deborah,

     

    I imagine the inconvenience that you are experiencing right now. I will help you on that.

    Formatting a disk means configuring the disk with a file system so that Windows can store information in there. Usually, when you install a new hard disk on your computer, it must be formatted with a file system, such as NTFS, Windows can store files that it contains.

     

    Please answer the following questions so that we can better help you.

    1 - is the specific problems of a hard drive?

    2. is it the problem persists when you use different USB ports on the same computer? If 'yes' then tick the question in another computer and let know us the results.

    3. don't you make changes to the computer before the show?

    I suggest to follow the steps below and check. Please move to the next, if only the problem persists after completing each.
     
    Method 1
    Convenience store equipment and peripheral performance such that it can solve some common problems associated with the hardware attached to the computer. Follow the steps from the link below to be executed, which.
    Open the hardware and devices Troubleshooter
     
    Method 2
    Run Windows updates and check if you have any availability for USB drivers. You can check the link below.
    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN
     
    Method 3
    Access the manufacturer's Web site and download the USB, the BIOS and drivers from the chipset and check the issue.
     
    Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved.
    Changes to settings are at your own risk.
     
    I hope this helps. Please write to us if you need further assistance.
  • Iomega external hard drive is attached but not found by printers & peripherals

    I had an external hard drive Iomega two years and removed to add a printer.  When I reinstalled it the light is on, but it is not displayed during the backup or the devices of & printers.  I uninstalled and reinstalled but can not use it.

    Hello

    Please contact the Microsoft Community Forums.

    It looks like Iomega drive external is not detected in Windows 7. We will analyze and identify the cause of the problem.

    Please answer a few questions to refine the question.

    1. what happens when you try to plug in the device?

    2. are you able to connect other USB devices to the computer?

    3. do you receive any error messages?

    4. What is the status of the device in disk management?

    This may be caused by the following:

    • Your player does not have a drive letter assigned in disk management
    • The player can be disabled or offline
    • Your USB driver is maybe corrupted
    • Damaged registry keys may be the cause of problems with connection of a CD player or DVD toyour

    I suggest you perform the steps described in the article and check out them.

    My drive does not appear in Windows Explorer

    http://support.Microsoft.com/kb/330140

    Hope this information helps. Get back to us if you have more queries about Windows.

  • Windows 8 problem external hard drive seen as device not drive

    I realize this post is redundant, but I have a WD 1 TB ext HD and seen in management of the disks, but u cannot assign a drive letter because which of the actions is also gray updates drivers tried

    PS my book (wd hard drive) is observed in the usb devices. Check and reinstall drivers with this win 8 that I have access to my external hard drive to storemedia
    1 check compatibility; good
    2 reinstall WD HDD 3 good x
    3 different brands web HD surf have the same problems as with win 8
    Device Manager displays the hard drive, but will not allow you to assign the letter to her for access

    Nice try a few other things passed friends house same problem solution got another HD toshiba connected to the system many went. I think maybe the WD HD is bad thing only brought last year so a little stuck with thanks a lot to the community and Manu for your support.

  • My external hard drive (Time Machine) has not been saved for a month.

    A month ago I left town for a week. After coming back, I noticed my icon time machine backup constantly Menu bar, but I paid no attention until three days when he tried to save in vain, I noticed. I tried to disconnect and reconnect my external hard drive, but it still does not work. Nothing has really changed any other times where I was out of town and time machines worked perfectly well. The only thought I have, which could prevent the machine from time to work, is that I've been reluctant to do the software update. I heard terrible things about the captain, especially when it comes to iPhoto, and iPhoto is my main thing on my computer... so I had voluntarily decided to not update. Do you think that this is what is causing the problem? Thank you very much.

    You him have not said if you did all troubleshooting. Tell us what troubleshooting have you tried, and then we can give you an idea.

    Furthermore, El Capitan is very stable. However, you should not pass until your system is stable.

  • Windows 7 does not recognize my external hard drive and it does not appear in Device Manager but not in disk management

    I'm trying to connect to my external hard drive, but the auto test failed
    and I know that the problem is not the cable or anything like this cause it works on other 2 computers
    It won't work on my laptop
    I tried many solutions but most of them that the hard disk appears in disk management

    and they change its trajectory

    but in my case that's not she appears only in management device that I tried to uninstall it but also did not work
    After that I did any suggestions? !

    Go to your computer manufacturer's support web site and search for the latest Windows 7 drivers for your specific model number.

    Download the drivers to a folder on your hard drive and install all of them, from the card mother/chipset drivers, LAN, Audio, USB, Graphics, SATA, Webcam, Etc., and so on.

    List of computer manufacturer support sites:
    http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

    If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

    Tips for solving common driver problems
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
    Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    J W Stuart: http://www.pagestart.com

  • I bought a new external hard drive, but it does not appear in the library mode.

    One of my external hard drives is almost full. I would like to move some of the photos from the old to the new one that I just bought. The new external drive appears in Windows Explorer, but does not appear in Lightroom.

    I use Windows 7 and Lightroom CC.

    Hi Loyce1023,

    In order to see the most recent external drive in Lightroom, you must either import some images of the most recent disc.

    Or move some images of the old drive to the more recent, outside of Lightroom, and then reconnect the images from Lightroom.

    Kind regards

    Tanuj

  • Can I restore my laptop hard drive files that have been moved to my external hard drive (who subsequentally has stopped working)?

    I cut and pasted and then a few important files from my laptop on an external hard drive. Since the external hard drive stopped working. Is it possible to find the files that have been moved?

    Thank you!

    (More info: I tried to recover the files from external hard disk but it requires a physical recovery and would cost over $ 1000, which I did not; also unfortunately I don't think I created backup via the "backup and Restore Center" files in the control panel).

    It depends on how long you have moved the files, and how the computer has been used since.

    If you have Vista Business, Ultimate or enterprise, you can use the previous versions.

    http://Windows.Microsoft.com/en-us/Windows-Vista/previous-versions-of-files-frequently-asked-questions

    Try these programs:

Maybe you are looking for