My garageband suddenly started fading out

So I recorded three different tracks.  The track of a guitar and two vocal tracks.  I worked a bit on it and everything seemed fine.  Then I started to mess with some settings, because I wanted to put some effects on the guitar.  And then I found myself accidentally clicking the 'duck' setting.  I immediately turned off.  Then I went to listen to return and at a certain point in the song, he begins to weaken and continues in silence and I hear nothing for the rest of the song.  I tried with my helmet and without and I hear nothing.  I also tried to adjust the Audio settings / noon and that did nothing.  I've also updated my computer hoping that would help, but again... nothing. PLEASE HELP SOMEONE.  I'm not bad with garageband, but I worked on this project for a while and I need to finish.  I hope someone can help.  Any help is appreciated.

What version of GarageBand do you use?  GarageBand 11, version 6.0.5 or a different version?

Since you have not mentioned it - have you checked on the automation curves track Master?  (Track > Show Master Track).  The main Volume should not melted.

When you play a little with the effects, you did changes in the Panel for the MAster track effects?  In the tab 'change '?

Tags: iLife

Similar Questions

  • Keyboard suddenly started giving double letters.

    My Microsoft "Natural Ergonomic Keyboard 4000" has suddenly started giving double letters (liike sited).  Running the mskey utility shows that there are two 'makes' then a 'break '.  Increase the repeat delay (since the time the shortest time) solves the problem, but stocks as a return back annoyingly slow.  I used this keyboard for almost a year, and other keyboards before that for many years, the shortest delay repeatedly with absolutely no problem.  My typing has not slowed between yesterday and today.  In addition, I noticed watching carefully that the second letter often appears after a noticeable delay, certainly once I took out the key.  I shook the keyboard upside down and blown air according to the instructions provided by Microsoft, does not.  I've not spilled something on the keyboard, and the double letter occurs randomly for all characters, so I don't think it's a dirty key selector.  Someone has ideas which could have caused the problem and what can be done to remedy this?  Thank you.

    Hello

    How long have you been faced with this problem.

    I suggest you try the procedure below.

    Step 1: Try to run Automated Troubleshooting Services and check out what he has to say.
    http://support.Microsoft.com/GP/hardware_device_problems

    Step 2: Remove the Control Panel keyboard software. Then download the software from the link below and install it.

    Reference:
    http://support.Microsoft.com/kb/307895
    http://www.Microsoft.com/hardware/download/download.aspx?category=MK

    Step 3: You can also check if the problem persists in safe mode and after the same return.
    Reference:
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Photoshop CC 2015 suddenly started to freeze at startup

    My Photoshop has suddenly started to freeze at startup. Creative cloud does not open more, just get out something blue Sundial.

    and about the ps, reset your preferences - https://forums.adobe.com/thread/375776

  • Satellite C660 - 2 EV suddenly started giving me the BSOD

    Last week my laptop 2 years suddenly started giving me the BSOD. It doesn't seem to be anything that triggers it. Do not know what information I provide, but I tried a restore of the system to an earlier date, but that did not fix.

    I managed to make a backup of data, and I have no recovery disks. I also bought an extended warranty last year.

    I should arrange to have it repaired or is there something else I can try first?

    Thank you.

    > I provide but I tried a restore of the system to an earlier date, but that did not fix.

    I put t think it's the best choice. I would recommend you to retrieve the computer laptop back to the factory settings, either using the Toshiba HDD recovery or the Toshiba recovery disc.

    If BSOD would appear after the system recovery, I recommend you to check exactly the content of BSOD.
    Sometimes non-compatible drivers could cause the BSOD.

    But of course, also the hardware problems (memory problems) could be the reason for BSOD.
    In this case, you must contact the Toshiba ASP to verify the material.

  • Portege A100 has suddenly started to freeze

    My Portege A100 has suddenly started to freeze without valid reason.

    It has also hurt to turn sometimes blue light appears on the disc hard turns, but not much happening and the screen remains empty.
    Sometimes he'll get into windows and I want to use it then suddenly stop responding completely.
    It does this in SafeMode as well ad from a cold start.

    The strange thing is that it seems to be triggered physically sometimes but I couldn't swear to it and maybe it's just a coincidence.

    any ideas?

    Hello

    Description seems you very strange because the question what you described happens sometimes. Eventually it s only a software malfunction?
    How the operating system is running on the laptop?

    What do you think of the resettlement using the recovery CD?
    This relocation and new OS can sometimes solve problems of frizzing.

    But if the portable feed then you should try another suggestion.
    You must remove the power supply and adapter of the laptop. Then wait several times (10-15 min). Put the power supply in the laptop and connect the power adapter.

    Then, launch Notepad.

  • My mini iPad keyboard 4 has suddenly started to be in the middle of the screen instead of low. Can I change back to the bottom of the screen?

    My mini iPad keyboard 4 has suddenly started to be in the middle of the screen instead of low. I could change back to position at the bottom of the screen?

    Keep your finger pressed on the keyboard icon button. Then press 'dock '. -AJ

  • My MacBook suddenly started working slow

    Hello! I got my MacBook Pro since 2012 and it suddenly started running slow. I rebooted several times. Also, I deleted some files, but it does not work perfectly. I noticed that when I start watching the video in my MacBook, it will stop so many times. In addition, when I search in Safari and do whatever it is, the system is slow and the MacBook is going to be so warm. Yesterday I used the application disk utility and test diagnostic equipment, but these processes did not affect the system of my MacBook. I'm trying anything possible to fix this myself before I take it to the repair shop and spend money on something that I could have probably staring at me.

    Here is some information on my MacBook

    MacBook Pro (13 inch, late 2011)

    2.8 GHZ Intel Core i7 processor

    4 GB 1333 MHz DDR3 memory

    MacBook Pro, OS X EL CAPITAN, 10.11.3 version

    Run EtreCheck and post the report here.

    http://etresoft.com/etrecheck

    Download, open the download folder, click on it to open it and select 'open '.

    Select a problem from the menu popup box "Choose a problem", then "Start EtreCheck" in the dialog box.

    Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

  • My MacBook suddenly started running slow

    Reading this thread: my MacBook suddenly started running slow

    I followed the instructions of Linc Davis to post the following are produced by the Terminal application and using the command:

    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|find tok|n Cause: -' | tail | open -ef

    The following text has been updated with the door...

    Jan 29 06:47:19 core Mason-MacBook-Pro [0] : cause of previous stop:-60

    30 Jan 10:01: 18 localhost kernel [0] : cause of previous stop:-60

    30 Jan 10:19: 49 kernel Michael-MacBook-Pro [0] : SSanadnbdobxox: Sandboxmdmwdowrokrekre (r(: 38838) 5md woden) YY (d1e) n (f1) I i/oAns/ppClialceatindar.apop/Cns/onCatelnentdasrer d/Ap-daplticaat lef-irleea-dr-edaatark. () / Mapp/acO38S/CCona7) lteentn sd/MaacOrS /.

    30 Jan 10:19: 57 kernel Michael-MacBook-Pro [0] : SSaandndbobox: x: mmdwodrwkeorkrer ((385387)) dendeyny ((1) 1) fifillee-read-r-dateaad-d/Aatppal ination/Applionscati/oGansme /GaCentme er. Capenp/Contetern.ats/pMacpOS

    Jan 30 22:52:48 core Mason-MacBook-Pro [0] : nspace-Manager-unlock: found no token 11211

    3 Feb 07:16:39 localhost kernel [0] : cause of previous stop:-60

    There was several abnormal stoppages in the last days. A negative stop code may indicate a hardware problem. The precise meaning of the codes is not publicly documented.

    If you haven't already done so, you can try to reset the system management controller. Otherwise, or if the reset has no effect, see below.

    Do a 'genius' one appointment at an Apple Store, or select another authorized service provider. You may need to leave the machine there for several days.

    Back up the data on the internal disks before you turn on your computer to anyone. There are ways to back up a computer that is not fully functional - ask if you need advice.

    If privacy is a concern, delete the partitions of data with the ability to write zeros * (do it only if you have at least two backups complete, independent, and you know how to restore on a blank disc from any one of them.) Do not delete the recovery partition, if it is present.

    Keep your confidential data safe during the repair of the equipment

    Apple recommends that you remove permission to a device in the iTunes store before serving.

    * One SSD has no need to be set to zero.

  • HP Mini 5101 suddenly starts to freeze

    Hello

    I used my HP mini 5101 (Windows XP Home Edition 2002, 1.66 GHz, 0.99 GB of ram) Fortunately for 13 months, and this worked without a Nick. Yet, in the last days he suddenly started to freeze completely unannounced and apparently more frequently. I can't make any specific action that leads to the gel. It happens when I have it on the desk, on my knees, while the screen saver is activated, as I write, when I pull the internet cable etc. The screen freezes completely. Everything seems normal, except that the cursor freezes and it does not respond to press more. The only thing that helps is to stop and restart button.

    But judging by the offerings of other similar, HP service seems not inclined to answer questions, however, I would greatly appreciate suggestions on what could cause this problem and how it could be fixed.

    Thank you very much!

    Hi Chris,

    As you mentioned a few times that happens when you move, I was wondering if HP 3D Driveguard may be responsible because there meant to park the heads of the hard drive in case the machine broke etc.  Maybe it's parking the drive heads in response to even the smallest movement for some reason any.

    Looking forward to hear from you.

    Best wishes

    DP - K

  • Why my printer has suddenly started printing only the first three quarters of a page...?

    Why my printer has suddenly started printing only the first three quarters of a page...?

    Hello

    Thanks for posting the question in the Microsoft Community!

    If I understand correctly, you are facing problem with the printer of. I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

    We start with two questions:

    1 have had any changes made on the computer before the show?

    2. What is the brand and model of the printer?

    I suggest for the link and try to run the troubleshooter and check if it helps.

    Printer in Windows problems

    If the problem is not resolved, please provide more information to help you best.

    Thank you.

  • Outlook Express has all of a sudden started to spam personal & business contacts

    original title: Outlook Express Spam

    Outlook Express has all of a sudden started to spam personal & business contacts and is put in the spam folder where I can't open messages to read. I have these contacts by e-mail & give them my personal e-mail address to communicate with me. HELP!!!!!!!!!!!!!!!!!!!!

    This spam folder? IT's not a spam folder.
    You seem in any case, have been infected and the need to clean up the malware on your computer.

  • I have a HP F 4280 printer who suddenly started to shake when you first put it later it begins to print what is causing that.

    I have a HP - F 4280 (copy 1) who started doing a click when turned on and just before starting to print, what causes it and what is the solution to fix it?

    copy printer 1) who all of a sudden started making a snap, it does when it is turned on and before you start printing, please tell us what is the cause and what the solution is.

    Hi Vince Mc Quade,.

    I see that you are facing problems with your printer. The printer gives a snap once on startup and printing once previously.

    Quick questions:

    1. You did changes to the computer before the show?
    2. Printer works fine except the noise?
    3. The problem occurs whenever you try to print?

    You can try the steps from the following link:

    Solve printer problems

    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    This seems to be a hardware problem; You can contact the manufacturer of the printer to check what they have to say about it.

    http://h30434.www3.HP.com/

    I hope that helps!

    If you encounter problems with windows, please keep us informed.

  • My windows mail e-mail messages suddenly started coming to MIME format that I can't read

    My email suddenly started coming to Mime instead of HTML format. How can I change to HTML?

    Tools | Options | Read. Uncheck: Read messages in plain text.
  • My hotmail account has suddenly started to send email from spam to my contacts. I am even not connected at the time

    original title: virus hotmail

    My hotmail account has suddenly started to send email from spam to my contacts.  I am even not connected at the time

    What to do if your Hotmail account is hacked or Hijacked

    http://social.technet.Microsoft.com/wiki/contents/articles/what-to-do-if-your-Hotmail-account-is-hacked-or-hijacked.aspx

  • my real player has all-of-a-sudden started download videos from youtube in mp4. No flv as previously. How can I fix it?

    I have been using real player for some time and was able to download youtube videos.  My real player has all-of-a-sudden started download videos from youtube in mp4. No flv as previously. How can I fix it?

    Real Player download all videos in mp4, it depends on the video that you download.

    To me, it seems as Real Downloader download videos in mp4 more often rather than a flv. recent files.
    If the video you downloaded is a mp4 file you can still play it in another media player like Windows Media Player, but for me, most downloaded with Real Downloader mp4 files have no sound when played in Windows Media Player.
    As you probably know, you can buy Real Player Plus for read, trim or convert mp4 files in RealPlayer. If my guess is that it's way to Real to get people to buy Real Player Plus. Or maybe not, I had this same problem and I don't know what the cause is at the present time.

Maybe you are looking for

  • How can I remove about 600 events in lightning 2.6.6 double

    I imported Outlook events 2.6.6 lightning in Thunderbird 24.6.0 twice. Y at - it an easy way to remove duplicates. I wanted to delete the entire data file and start again, but could not find the file.

  • 15 HP: drivers

    HP 15 RUNNING WINDOWS 7 (64-BIT) I NEED DRIVERS FOR THE FOLLOWING: ETHERNET CONTROLLER - PCI\VEN_10EC & DEV_8136 & SUBSYS_216F103C & REV_07 NETWORK CONTROLLER - PCI\VEN_10EC & DEV_8179 & SUBSYS_197D103C & REV_01 PCI DEVICE - PCI\VEN_10EC & DEV_5229 &

  • in ios 9.2 battery drain

    Hi I have a 6 s My battery in IOS 9.2 drain

  • How can I enable the Task Manager after recovering from an attack of Win32.GEMA

    Hello I am running Windows XP SP3. I have recently had an attack of the Win32.GEMA Trojan horse. Details of it are here: http://www.microsoft.com/security/portal/Threat/Encyclopedia/Entry.aspx?Name=Trojan%3AWin32%2FRansirac.G I recovered my system us

  • BlackBerry Z10 vibrate then ring

    Z10 is not basic features like blackberry being able to vibrate first and then ring when you receive a call and the case in - the characteristics of the case. These things will be available at least in an application? Is there a way I can use the vib