BlackBerry Z10 vibrate then ring

Similar Questions

• BlackBerry smartphones vibrate without ring

  I have a new 8300 Curve series which is still under the return policy. I changed my profile from "Normal" to "Loud." Because the change does not ring, it vibrate when you receive a call. I changed it to 'Normal' and still get vibrate on incoming calls. I read that sometimes the battery for a few seconds will alleviate the problem. This isn't a remedy useful for me, as I have a case of Otter skin that makes a lot of time to change the battery. I don't mind pulling the battery sometimes, but if it will happen all the time I need to get a different type phone. What is the remedy and this will be an ongoing problem? Thanks in advance. J Buckley

  Hello

  If this happens when you use the loud profile and not when you use the normal profile, it simply means that you need to configure the strong profile according to your needs. The name of 'Loud' is just a name. To watch how it is configured.

  from the home screen, look for the Profiles icon and click on it. You will see the profile list that exist on your Blackberry. Scroll down to the Advanced section.

  1. There you will see every profile listed : normal, loud, only telephone etc.
  2. Click on one to edit it. You will get a page with several lines : level1, phone, messages, calendar...
  3. When you go in the section phone , you get to another page that is divided into two sections : in a case out of Holster.
  4. Each section, to define what to do (vibrate, ring, vibrate then ring) and how (vibrate ring 0 1 2 3 times, soft strong climbing etc.).

• BlackBerry Z10 vibrate only still has sound

  I've just updated my OS to the last today and am still having this problem. My phone still made sounds in single mode of vibration. On vibrate only, vibrate button we shaded out in the off position if you can not turn at all. Help!

  Based on your screenshot above, your settings are the opposite, to vibrate mode it should have as a sound and vibrate on... The only thing left to do is to do a restore and system from scratch, this will also get updates.  Something changed this setting and if its greyed out, then an application may be blocking.

• BlackBerry Smartphones phone vibrates and rings once only in Pocket.

  In a pocket with phone calls vibrate then ring & vibrate again. How does sound in sachet.

  Change your profile settings to tone only in the Holster.

  1. Select the profiles icon

  2. a box will appear where you can quickly choose between Loud, vibrate, quiet, normal, phone only, and outside. If you like quick-change device profiles and select the one you want and get out.

  3. If you want to change the tones assigned to the applications in the device, and then select the last option, advanced options
  (some older models and 'Advanced' OS 4.1 and below will not step - so advanced is not present go directly to step 4 below).

  4. Select the profile you want to change. (Loud, vibrate, quiet, Normal (default), phone only, Off)
  Note: on the 8100, 8800 and 8300 models: do not click on the trackball. Instead of this, click on the menu button to the left of the trackball).
  Note: The profile that is in use will tell: (active)

  5. you will now see a list of all applications that can have an assigned tone (browser, calendar, level 1 Messages, Messages ([email protected]), Messenger, MMS, phone, SMS, job ect..)

  6. Select the application you want to change the tone / notification for

  7. you can now edit the tones of the case and Holster / notifications.
  (a) select between: none, Tone, vibrate, vibrate + tone
  (b) select the range that you want to use
  (c) Select Volume (the options are mute, low, medium, high, climbing)
  (d) to select the number of beeps (the options are 1, 2, 3)
  (e) select Repeat Notification (options are None, flashing LED)
  (f) if value vibrator or vibrate + tone and select number of Vibrations (the options are 1, 2, 3)

  8. repeat a to e for each of the applications set out in number 5 above

• Problem with the microphone blackBerry Blackberry Z10 Z10 :(

  Hello, I had this course of the first three days of my blackberry z10. Then all of a sudden my microphone was not working, I had the OS 10.2.1.2102. Guys I need your help please on how bad this problem. Thank you

  It's against the forum rules to post a link to the possible pages who advocate free software loading and actions that lead to a possible loss of security, while I don't know who is legally available if I post the link, it will probably get deleted anyway not released. It should be pretty easy for you to search and find yourself.

  Regarding the resolution of the problem, I think that it's worth a try, and I probably would if I were in your situation, but in all likelihood, there may be a HW fault so I wouldn't say anyway.

  If you have had only three days and then depending on what country you're in means that you might be able to return any way, you can here in the United Kingdom within 7 days (under certain conditions), but whatever rights you are guaranteed should be always there and if it is a solution of ease for you you might as well try to return it to those who resell it to you.

• BlackBerry Z10 well defined, I can't get the phone to ring and vibrate as the default value for all calls. I can put individual contacts, but I want to ring and vibrate for all.

  Although the value, I can not phone ring and vibrate as the default value for all calls. I can put individual to vibrate and ring contacts and it works but I want as the default for all incoming calls. Any help would be appreciated, thanks

  Sorry, I found the answer in the manual

  "Change your ringtone, sounds or alerts.

  GoTo settings\notifications to the bottom of the screen select application\phone

  You can activate vibrate out there, put the ringer default etc.

• BlackBerry Q5 can I put the phone both vibrate and ring for an incoming call?

  I put the phone both vibrate and ring for an incoming call?

  Yes, you can.

  On your home screen, slide to the bottom of the top, and then select settings > Notifications > Applications > phone. You can then set to vibrate while sounding, and you can select which ringtone you want to use.

  In another of your discussions, you asked how to set a ringtone for a specific contact. What I have described here will set the default ringtone for all callers, but those that you set up with the specific notifications.

  See you soon.

• Problem blackBerry Z10 Custom ring your SMS

  I can customize the ringtone for some contact.  My problem is that the ring works only for calls. It will not change to the texts.  I don't understand that the process or change is the same.  Is there any solution for this?

  Hello markpaxman,

  Welcome to the forums.

  The ability to set a specific tone for text messages is not available on the BlackBerry Z10. Thank your for your comments on this feature, we value your feedback as we are always looking to improve our products and services.

• BlackBerry Z10 Default earpiece/Headset Bluetooth / output Audio Plug

  During the drive, I have a kit hands free bluetooth (speaker jabra) and I have the audio output taken mini plugged into my car for audio (stereo / music).

  During audio playback to my car, it uses the audio Jack very well, the problem is when I receive a call, I want to use the bluetooth headset device instead.

  Now when I receive a call, the audio of the call is routed to the mini taken and I have to manually select the helmet after answering the call which is a pain in the...

  Is there a way to set the default device for different outputs.

  for example

  Use the mini as the audio device output by default when the music plays.

  When I get a call, use the headset as default device bluetooth for phone calls.

  When I hang up, swinging back to the mini taken (because it is the default device for audio)

  In addition,

  I ordered the bridge thinking music that he could solve my problem.

  Will I have the same problem with it when 2 bluetooth devices are connected? for example, the audio gateway and my bluetooth headset.

  Should be able to assign the bluetooth services specific to the results of the default value.

  for example Audio > mini plug if it is present as a default value if no, he can use bluetooth

  Calls > bluetooth headset.

  Hope that makes sense.

  Dave

  The Blackberry music gateway solves this problem (kind of) works better... when the two jabra or any other headset device is connected and the music gateway is connected it muffles call correctly and works correctly...

  The new problem is introduced only if you have a headset (bluetooth or hands-free headset) that also supports music services. (The two compete to connect to theses services)

  I suggest buying a hands-free device that does not support music services (only a helmet) and then you should not meet for the problem below

  Read this new thread to see the solution to this new problem, if it still exists.

  http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/Bluetooth-services-and-BB-music-gateway-enable...

• BlackBerry Z10 is stuck inside the camera!

  On the z10 blackberry, sometimes you can't get out the camera... for some reason any the shot does not do anything and you're stuck out there. The only way out is by clicking on the photo album and then get out of there!

  BlackBerry z10 is full of bugs!

  Hey everybody. We will all stay on the topic and helps answer that the question has been addressed initially. Thank you! ~

• BlackBerry, BLACKBERRY Z10 Z10 Os Downgrade

  Hello

  my name is Ghislain

  I m from Pakistan. I m using Blackberry z10 stl100-2 last night I reset my mobile but my mobile is not on and just the red light flashes, then I try to link blackberry but no installed os not on software update so I'm looking App Autoloader Blackberry os 10.3 and install on my mobile now my phone works, but some applications like photos video, video clip and some applications do not work properly I want to just install my previous OS 10.2 on my mobile please help me for this

  Thanks in advance

  Unfortunately, ignoring all warnings with that you should have to be made, you have now activated your device in a developer test device. There is no intended for general purpose OS 10.3.3. 10.3.3 OS out there only are strictly for the application development process, and they are severely constrained in their functionality. It is an intentional situation, hamper the OS for the developer of the app to specifically test some things. That's why these OS developer packages are never intended to be installed at someones "daily driver".

  In addition, the 10.3.3 Developer OS includes a similar restriction 10.3.2. a... Once you move to the 10.3.3 level, you cannot fall back to previous levels or 10.3.2. It is blocked, just like 10.3.2 is blocked to prevent falling back to 10.3.1 or an earlier version.

  You're now stuck on 10.3.3 while BB released a production version of the OS 10.3.3. There is no way around that. The only thing you can do is try to make the OS as functional as you can through these tips:

  • http://forums.CrackBerry.com/BlackBerry-10-OS-f269/well-apparently-i-made-mistake-updating-10-3-3-WH...

  It will not be perfect, and it won't be complete. Some things may work for you, and others could not. But it is not what it will be until BB releases a bunch of OS 10.3.3 production.

• BlackBerry Blackberry Z10 ID and app world on Z10

  Whenever I click on id blackberry I get the following message: unable to connect to the blackberry server id. Please try again. (50506)

  Also when I try and download anything from the app world I get: an error has occurred processing your request.

  Any ideas on what is wrong? The two worked until a week ago.

  I had a problem with this on both phones Z10. We have a number of these phones. The first thing to check is to make sure of the time and the time zone is set correctly. The next thing to do is to try a battery pull to do a complete reset of the phone.

  If the problem persists, the next step that I took was to re - install the OS, re - register the phone with Blackberry ID and then restore from the backup. After that I did the re-install, the phone was correct.

• Notify BlackBerry Z10 voixe mail, no voice message

  I took by mistake a purchase of voicemail calling my carrier, rather than open the notification on my BlackBerry z10. Now, in the hub, it says I have an unopened answering machine. When I try to touch this message, nothing happens. When I try to mark as read or delete, it does nothing. How can I get rid of him?

  Hey CarlaL,

  Welcome to the community of BlackBerry Support Forums.

  Thanks for the question.

  We are aware of this problem, remove the battery and place again.  Then the voicemail notification should disappear. Let me know if you have any other questions.

  See you soon.

• Lost blackBerry Z10 phone

  Magalie

  Today, I have a bad day. I lost all the money this month (I'm a student), and the worst is that I lost my blackberry z10 . When I knew I lost it, I was very angry.although it is an old phone, I purchase form someone else, but with me, it's a treasure and a friend. I'm going to protect.blackberry.com, then replace 'Flag as stolen', because I want the thief have only a brick. but now I think that if the thief do not turn the data or does not connect with a wifi then sell it to another people. It is verry bad for them. They lose money from verry for a brick. (I live in vietnam, security is not high, I don't want to aggravate some for someone, but I don't want someone not know my data on my phone, I install 10.3.2, I don't know what happens to my data on my SD card, I want to, it can be earsed).
  You can check what is happening with my data, as it can be not to connect to the internet.
  Thank you verry much!

  Oh sorry for your loss!

  thanhzen2009 wrote:

  but I don't want someone not know my data on my phone, I install 10.3.2, I don't know what happens to my data on my SD card, I want to, it can be earsed).

  Your inserted SD card is not affected by Protect or whatever it is. To protect your card data SD Media you would have needed to have the encryption on the card.

  thanhzen2009 wrote:

  You can check what is happening with my data, as it can be not to connect to the internet.

  No, you can't.

• BlackBerry Blackberry Z10 Z10 restarts at least than the charger

  I got my BlackBerry Z10 since 11/05/2013 and a week there, it restarts randomly and now anytime he's not on the wall charger, it seeks constantly to restart, but it never ends or if on the off chance that it does, it remains not on more than 20 seconds and it restarts again.  I just really don't want to get a new phone, but am at a loss here and really can't keep the phone on a wall charger all the time.  Any suggestions on what to do?  (In addition, this phone has never saved to a computer, not for want of trying.)

  cartwrightas wrote:

  I got my BlackBerry Z10 since 11/05/2013 and a week there, it restarts randomly and now anytime he's not on the wall charger, it seeks constantly to restart, but it never ends or if on the off chance that it does, it remains not on more than 20 seconds and it restarts again.  I just really don't want to get a new phone, but am at a loss here and really can't keep the phone on a wall charger all the time.  Any suggestions on what to do?  (In addition, this phone has never saved to a computer, not for want of trying.)

  Hello and welcome to the community!

  Please try this sequence... Note that, throughout the entire 4h15m process, your BB must be directly connected to a charger checked (not PC USB, not a docking station):

  1. With battery, connect your BB to the wall charger
  2. Leave it alone for 2 hours, no matter what the LED or the screen not
  3. Remove the battery
  4. Wait 15 minutes
  5. Insert the battery
  6. Wait another 2 hours, no matter what the LED or the screen not

  This has been known to "revive" some BBs. If but it does not help, then please try again increase the stage 4 time to 2 hours and possibly longer than 4-5 hours waiting.

  It is also possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

  1. Get a known good and already fully charged battery... use it in your BB and see what happens
  2. Get access to a BB good and the same known... use your battery in there and see what happens

  The results of this will show if your BB or your battery that has the problem. Carefully note please that 'new' and 'know' are not necessarily the same things. Although rare, a 'new' battery could certainly be defective. On the contrary, the easiest (and cheapest, btw) method to perform this test is to find someone with an identical BB which has no problem... trade in batteries and see what happens.

  Good luck and let us know!