My gradient stopped allowing to mix two colors

Similar Questions

• How to mix two background colors

  Hello.

  I want to mix two colors to make just a single slope!

  gentle slope from one to the other.

  From left to right

  I have two paintings (diferent background color up and down and in midle)

  I want to experience easy and gentle.

  Any tutrial? Video?

  Thx a lot.

  

  

  Bring your gradient editor by clicking on the shade of gradient in the menu bar when you choose the gradient tool.

  When this gradient editor box, you will see a series of sliders that have options of nuance to set the color.

  The value of A is the left slider, B is the right slider, and C is where you can set the color in A and b.

  Select the cursor to A, and then click the box to C color picker. Now the color of the blade on the left that you want to mix the sample. Do the same for B. Now on a new layer, make a selection on a new layer above that extends on both sides. Draw your gradient with the gradient tool between the two parties to mix them together.

  Hope that helps.

  Bunch of brand

  @lifebypixels

• How to reduce (or eliminate) the part of 'White' in a gradient of two colors?

  I spent the delay time trying to take what I call the "degraded Monster", that is, the concept of the gradients did not come across that easily over me.

  Fast forward to this morning. I created a simple two color gradient by using the option new shade of gradient in the Swatch in Adobe InDesign CS5 Panel.

  My left color is red (CMYK 0, 100, 100, 25) and the right stop my color is dark red (CMYK, 15, 100, 100, 70)

  If I understand the concept of a gradient, the inside of any object (fill) that I have swatch using a particular gradient should mix color of window to the other, with in-between transitional colors.

  If I select the linear gradient, the transition runs according to a single linear axis from one point to another. If I select the radial gradient, the transition runs from the center of the object to the outside. I can reverse a linear and radial gradient by simply clicking on "Reverse" in the Panel gradient color.

  Now to my question.

  When I apply the gradient above, what I should see the selected object is filled with the applied gradient, with - in the name of the argument - #1 left and stop-color #2 in the right color stop. I don't see this effect, however.

  Instead, what I see, it's the stop-color #1 (dark red) on the left and the red color washed out (white) on the right. I want to see on the right is the stop-color #2. Not a faded version of it (where the 'white').

  In simpler terms, why I see a stop white-faded color at all? And how can I rid my gradient of this effect?

  

  The image above shows my gradient. Notice the 'white' faded part on the left; It should be red, not faded red. Dark red on the right is fine.

  

  This image comes from a MS Word document; I would like to than the gradient look: dark red on one side, red (or red) on the other. No discoloration.

  Any suggestions?

  Thank you in advance.

  -Pat

  No worries, Pat.

  A series of screenshots...

  Simply select the rectangle. Use the gradient tool to draw a gradient from one end to the other. Probably is white to black as below.

  

  

  Open the gradient panel. Right-click on a limit. Add to the color chart.

  I add gradients to the nuances that make it easy to put to day/change.

  

  Double-click the new grade. You get the following dialog box:

  

  Change in CMYK.

  

  Change a limit switch.

  

  Change the other:

  

  I didn't rename it, but I do it in practice.

  Take care, Mike

• Where the gradient editor disappeared to? No color stop!

  I've updated from Photoshop CS to CS3 (since a worm 4 user)... but I noticed that the gradient editor disappeared. Well, I can open it up, but there is nowhere to change the color stops! It is CERTAINLY there and usable in the CS version, but when I open the same file in CS (which is always installed on the pc), the gradient editor now also lost the color stop Editor!

  I tried searching in the pallets, he sought in the Windows menus and view, double click on the gradient in the Toolbox button, clicked on everything from the toolbar gradient, click the arrow at the top right, clicked on the nuances of gradient, but a big fat zip naadaa!

  Someone has experienced something like this before? I wonder if I'd be better to just uninstall and reinstall everything and making sure that I can also uninstall the old version to make sure there are not any conflicts, but I PREFER to keep the available CS, just in case where there are problems in CS3 - like this. Unless, of course, it is the cause of my problem!

  Thanking you in advance!

  BenTimages wrote:

  I guess I should have been more specific: the only remnant, I can see the gradient editor is the part that appears near the bottom of the Options bar, which has all of the options such as Load, Save, New, OK or cancel, or ONE of the color stops - features I been using happily for years. All I can see when I click on the Options bar are the presets and the small black arrow at the top right.

  To be honest, since the purchase of CS3, this is the first time I tried to use the gradient editor, so I can't really tell what was the initial state. Where my mark, the method of uninstalling/reinstalling, just to get back to a decent default value.

  Thus, it is not all second options on the left click on everything, even when I look at the presets when they set in the Options bar.

  There is also no sign of any gradients in the view drop down menus or windows display options, either.

  Click on the gradient of the actual sample that is displayed in the Options bar.

• iPhoto 09 stopped allowing me to print photos. Error message: "No themes available" "there are no themes located. Until at least a theme has been installed, this feature will be unavailable. »

  iPhoto 09 stopped allowing me to print photos.

  Error message below:

  "No themes available.

  "He has not located themes. Until at least a theme has been installed, this feature will be unavailable. »

  Re - install iPhoto

  1 put the iPhoto.app in the trash (to drag it from the Applications folder to the trash)

  2 download on the App Store to reinstall is on your shopping list * it.

  For older versions that were installed from the disk, you need the following additional steps:

  2a: on 10.5: go to HD/library/receipts and remove any pkg file it with iPhoto in the name.

  2b: on 10.6: these recipes can be found as follows: in the Finder, use the menu go to and select go to folder. In the type of window that results from

  / var/db/receipts /.

  2 c: 10.7 or later, they will be

  / private/var/db/Receipts

  A Finder window opens at this location and you can delete the files pkg of iPhoto.

  3. replace in place.

  If you bought a disc of iLife, iPhoto is then on it.

  If iPhoto has been installed on your Mac, when you go to it then it is on the restore disks from the system provided with your Mac. Insert the first and choose "install Bundled Applications only.

  * Sometimes, iPhoto is not visible on the shopping list. It may be hidden. See this article for more details on how to view it.

  http://support.Apple.com/kb/HT4928

  A question often asked: Will I lose my Photos if I reinstall?

  iPhoto, the application and the iPhoto library are two different parts of the iPhoto program. So, reinstall the application should not affect the library. BUT you should always have a back up before doing this kind of work. Always.

  
  

• How can I create a new gradient based on the current fill color that I am applying it?

  I often need to add gradients to shapes that already exist and already have a fill color. I want to add a gradient that would be a mixture of the color that is already there and the black.  Gradients of new totally ignore what existed before. Is it possible to include the fill color that is already there in the slope?

  In fact, you can skip the step of swatch. You can drag the fill color directly from the toolbar at the appropriate end of the fitting band gradient in the gradient/panel palette; Then, apply the gradient. Be careful, though - you can end up creating a new unwanted color along the gradient stop.

• 10.11.3 stop message upgrade mixed language

  Hello

  After upgrade successful 10.11.3 messages, like dialogue stop changed to mixed-language.

  Previously, he was completely Hungarian, that now it is mixed.

  Concerning

  zoly

  Maybe this will solve your problem:

  judgment of the mac.

  Start the mac all holding the SHIFT key, it will start very slow, in safe mode, log in to your account.

  Then stop again, and then restart your mac normally.

  (this removes several system caches).

• DEP will stop Google Chrome every two or three minutes and there is no appropriate settings so that it can stop

  original title: google chrome and stops DEP

  I asked this yeaterday and have had no response. Would be very grateful for help. DEP to stop Google Chrome every two or three minutes, and there is no appropriate settings to make it stop. ? Parameters

  http://www.Google.com/support/forum/p/chrome?hl=en

  Link above is using Chrome.

  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable DEP on or off for a program under Vista
  Mick Murphy - Microsoft partner

• Why the results research print in two color blue and black fonts?

  Original title: research

  Why the results research print in two color blue and black fonts?

  In general, the files and folders shown in the Explorer with the blue text are files and compressed files.  Black text indicates a normal file or a folder.

  writing in the new message: * e-mail address is removed from the privacy... *

  Why the results research print in two color blue and black fonts?

• Allow more than two users to office to a machine remotely

  My team at work must be able to allow more than two users of office machines (running Windows 7, Windows 2008 Server or Windows 2003 server) remotely. How do I change the settings to allow this?

  Only servers will allow multiple terminal sessions. Workstations will not. And if I remember correctly, Windows 2003 Small Business Server will allow no more than one session.

• Windows 7 stops allowing access to the shares.

  I have a Windows 7 Pro 64-bit installed.  I have a computer repair shop and use this computer as a file server. I have a share of "Programs" created for other computers can connect and load updates, etc.  I think I created the part successfully but a few problems.  I can connect on the share via any OS such as XP, Vista, 98, etc. BUT other Windows 7 PCs are still able to connect.  For some reason but all of a sudden the Windows 7 PC will stop allowing access.  I can restart the PC Windows 7 and everything starts to work properly again.  I can't understand this because all computers are able to independently connect BONES, then after a while, it will start to deny access to the OS legacy until a reboot.  Can anyone help?

  Hi danieljh,.

  My first suggestion would be to update the network cards.

  If that makes no difference then perform a clean boot and see if any third-party application interferes with performance on Windows 7.

  To perform a clean boot on a computer that is running Windows 7, follow these steps.
    
  1. click on start, type msconfig in the search box and press ENTER.
    
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.Microsoft.com/kb/929135

  In addition, see the section on how to restore your computer to a Normal startup mode.

  Let us know for further assistance

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• WHY ILLUSTRATOR WOULD STOP ALLOWING ME TO 'DEVELOP' TYPE - WORKED A MINUTE AGO

  WHY ILLUSTRATOR WOULD STOP ALLOWING ME TO 'DEVELOP' TYPE - WORKED A MINUTE AGO

  Could you describe better text rather than develop it, it's faster!

  Use 'expansion' on stroke or complex objects containing the type, stroke, effects...

• How to mix two AIArt objects

  Hello

  I'm trying to mix two AIArt objects (two rectangles created using kPathArt type), but obviously, I'm not able to identify the appropriate SDK functions. I need to get the same result with the SDK I would be with manually by selecting these two rectangles and implementing the object-> mix-> Make. Thanks in advance.

  Zdravko

  There is more information than PARM errors, but there is no way to get more than one error PARM. As I'm sure is obvious, he dislikes one of the settings - it can be things like feeding a kGroupArt or a kSymbolArt to manage when its waiting for a kPathArt, for example. Make sure you pass in what you think you're passing! I made this mistake more than a few times.

  Looking at the documentation, it feels like most of the settings are pretty simple in a matter of two-way boring. If you are passing a pair of normal no composite paths then the most likely cause will be (a) installData or (b) clientCallback. But it feels like it must be right or it would fail to compile so I'd look more close to installData - I noticed is not documented (well, the parameter is not, the struct is). installData doesn't seem too bad either frankly well. If you don't start by feeding something really vanilla, I would do that first. Once you have verified for yourself that he is working in a gesture of boring case on more interesting cases.

• How can I mix two video clips where they join together in a movie?

  Hello wonderful movie spirits, decision-making

  I'm working with Adobe first 6 on a Windows 7 computer.

  How can I mix two video clips where they join together in a movie?

  I know how to place two or more video clips together in the same movie, but how can I give them a bit of a mixture of just where they join?

  I have a PDF manual and the instructions of the built-in web browser.  In the instruction manual to the "Chapter 7: layering and Compositing", he talks about the transparency of a video sequence and I understand that... but I don't want to do one or the other video clip transparent anywhere except where the two video clips are joining with maybe a bit of overlap.

  I would like to make a little blur right where the two videos are joining the middle... is it possible?

  Thank you

  Digi

  AHA that kind of mixture.

  6.5 have not used in a time loooooooong.

  It's so memory, hope I get this right.

  Together the two each other clip

  Make a hidden in Photoshop and overlay it on the two clips.

  Go to the transparency settings and the value of the top 2 video clip touches Alpha.

  Screendump to mast:

  The right side is black just for the forum, but should be transparent.

  

• HAVE CS4 - stopped allowing me to grab the handles and size text box or picture etc.

  It used to work fine, then one day, he stopped allowing

  I manually, drag and size of objects, etc. text boxes.  I reinstalled Illustrator, restarted, still the same on all the

  new or existing files. Help, please.

  Try view > show/hide area delimitation. Its a toggle Cmd (Ctrl) - SHIFT - B that some software use "BOLD" fonts is false.