Windows 7 stops allowing access to the shares.

Similar Questions

• access to the default in IIS6 and IIS7 Web site, how we configure IIS6 on windows 7 to allow access to the default Web site

  How to configure IIS6 on windows 7 to allow access to the default Web site or there at - there someone out there who can put up my computer at a reasonable rate of legend

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Photo Gallery can't open the photo because you are not allowed access to the location of the file

  Photo Gallery can't open the photo because you are not allowed access to the location of the file some of the image are open

  Click on the folder and change your permissions for it and all subfolders and files all rights and if necessary take hand the case (and maybe the parent folder or even its parent - and all of the subfolders and files) until you have the permission you need.  Here are the general procedures to help you:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Is it posible to allow access between the host and virtal machine without wired network?

  I want to use my laptop to show him that I did in the virtual work to other people at my home.

  However, the laptop is ofen not allowed access to the network in their office.

  Is it posible to allow access between the host and virtal machine without wired network?

  VMware player

  My virtual machine is filled to the physical network adapter and use the static IP address.

  Brad

  Setting of the virtual machine: filled

  Change that to each host only (what Continuum called VMnet1) or NAT (VMnet8).  Both use a separate virtual NETWORK card to connect the physical computer virtual host, independent of any NETWORK adapter on the host.

  ... Since the machine host (win7) could not get IP, ping fail to VM (192.168.1.5)...

  Because the connection between the guest and the host is through a separate NETWORK card, you must use the 'other' IP address.  Access a prompt on the host computer and type IPCONFIG to view the IP address of VMnet1 and VMnet8 NIC.  Then use this IP address instead of 192.168.1.5.

  And when you have changed the network management modes (i.e. of bridged to host-only), Windows does not automatically renew its IP address.  The virtual NETWORK card uses a different subnet if you need to renew your DHCP lease or change your static IP address to work with the new subnet.

• Allow access to the USB Reader under account 'user '.

  Hello world

  Need help to allow access to the usb ports so that users can use a card reader to download stuff on a web application, we have.

  The great way would be able to push on HP device Manager (I v4.5) and Thin Clients are T610 running WES7

  Any help is appreciated.

  See you soon,.

  The local user account is configured to restrict access to the Z:\ only through NoDrives policy.  See http://technet.microsoft.com/en-us/library/cc938267.aspx for more details.

  To make life easier, there are calculators that you can use to determine what should be this entry of 32 bits, based on drive letters you want hidden.  An example is http://www.wisdombay.com/hidedrive/index.php.  The default value for Z:\ is only 0x01ffffff (33554431).

• Cannot open this file because you are not allowed access to the location of the file

  I restored my compaq 510 professional vista, I get the "cannot open this file because you are not allowed access to the location of the file" whenever I tried to open a file or image

  I guess these are files from your previous installation. Take possession of them.

  A. check the permissions of the file or folder the file is saved in and appropriated:
        
  1. right click on the file or folder and then click Properties.
  2. click on the Security tab.
  3. under group or user names, click your name to see the permissions you have.

  To open a file, you must have the read permission. For more information about permissions, see what are permissions?

  http://tinyurl.com/2j9vgr

  To take ownership of a folder:

  1 right click on the folder you want to take control and then click Properties.
  2. click on the Security tab, click Advanced, and then click the owner tab.
  3. click on modify. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on the name of the person you want to give to the property.
  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.
  6. click OK MS - MVP - Elephant Boy computers - don't panic!

• SUN grant writing back and allows access to the GL

  Hello
  
  SUN grant writing back and allows access to the GL
  
  Sravan

  If ODI can do it then you can assume generally that SUN will not.
  It seems that everyone forgets to press the useful buttons, correct these days.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• When you try to share Windows Media Player, error, you must first be allow access to the library

  I want to share my Windows Media Player and have checked all the boxes according to the needs

  But when I go to another identical computer, it displays the name of the library to share but said

  "Before you can play items in the library, you must first access to the library" it works the opposite way round - I can see the other computer media and play from there, but cannot read any media on this computer.

  In the box, I want to run the media on I can see the name but not the small triangle to expand the options

  Am running Vista professional

  Any ideas please?

  Hi TonyCope,

  1 are you able to share files both ways on both computers?

  Have you checked if you have configured media sharing on the computer that doesn't work properly?

  For more information, see the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-sharing-media-in-Windows-Media-Player

  2 are the two machines running Windows Vista Business?

  3 a share already worked on both computers, or has it always been this way?

• Firefox suddenly stopped allowing access to Https sites, saying that the sites are not reliable. Chrome and IE allow them. That is what it is?

  Windows 7 64 bit
  ESET antivirus
  The sites in question are all the sites I've used frequently, they are reliable. When I read the page details on caution at least a site had a valid certificate based on the dates. The reasons given don't are not all "expired" there are several others. Here's another example:
  www.bankofamerica.com uses an invalid security certificate.

  The certificate is not approved, because no sender string has been provided.

  (Error code: sec_error_unknown_issuer)

  Thank you for pointing me in the right direction. With your help, I was able to fix the problem.

• A windows 7 computer cannot access a file share on another computer windows 7 in a home network, but others can.

  Hello

  "You don't have permission to access \\computer x\c. Please contact your network administrator to request access to ' I want to be able access all computers on my network, whether they are Windows 7 64-bit or Windows XP Pro machines.

  All computeers can access Internet and my printer.

  I'm unable to access files on one of my computers on my home network to a PC running Windows 7. The same PC can access most of the other files on the other PC. I have a mix of XP Pro and Windows 7 and they are defined as a working group not a homegroup. To complicate the isue is a laptop computer that cannot access this computer either. But the facts are that two Windows 7 PCs that appear to have identical settings cannot access both another windows 7 PC.  I guess that the unreachable PC appropriate sharing as other computers on the network can access.

  How can I change the target of the PC share permissions so I can access it from any computer on the network? Or maybe the question is from the other computers that access computer is blocking access to the setting on the PC that can't?

  All computers can view the readers there is a problem if a drive is empty, why report it: "you are not allowed..." »

  Hello

  Refer to the suggestions for the following links and check:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  I hope the above information helps!

• Change security groups are allowed access to the project

  Hello

  We have a project of the Disqualification in our production environment that allows only administrators to view/access it. We now allow access of data analysts. I know that we could just edit the prod Manager access security group, but due to some storage issues related to the postgres DB that uses a Disqualification, we clearly downwards and the redeployment of the Disqualification (and the project) on the prod server every two weeks. This means having to manually modify access groups after each reinstall. To save the duty of our many stop to promote a new project dxi file, is there something that can be added to all config files to allow data analysts access the project? Editing a config in our backup file would be very fast and simple.

  See you soon

  Jon

  Unfortunately, no, no.

  I can't imagine a scenario that would require the Disqualification to redeploy completely. If there is a problem of PostgreSQL, the worst case would be a fall and recreate the Pb of results, I would have thought.

• Windows Mail stops when I use the spellchecker

  Windows Mail sometimes/often stops when I use the spellchecker.  There is no obvious reason or a consistent trigger I can find.  I lost the email I typed.  I would prefer not to have to record every email in my drafts before I check spelling it.  How can I fix?

  Hi Holnee,

  Looks like you can have something in the background, interfere or that we would need to check the system for any problem files.

  The first thing you can do is to check your system for any possible infection such as a virus or spyware. Do a full scan of the system and see if you find infections and if yes which solves the problem that you are experiencing.

  The next thing to do would be to put yourself in a situation of clean boot to ensure that no background program interfere.

  1. Open the Start Menu
  2. Type msconfig in the Search box and press enter
  3. Click on continue in the UAC prompt
  4. On the general tab, click Selective startup.
  5. Under Selective startup, click on to clear the Load Startup items check box.
  6. Click on the Services tab, click to Select the hide all Microsoft Services check box and then click on disable all.
  7. Click OK.
  8. When you are prompted, click restart.
  9. After the computer starts, check if the problem is resolved.

  If that still does not solve the problem then let's you run the System File Checker.  It will scan all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  1. Open the Start Menu
  2. Type the command prompt in the box start the search
  3. Right click on command prompt and select run as administrator
  4. Click on continue in the UAC prompt
  5. Type the following command and press enter:
     sfc/scannow
  
  Please let us know if this solves your problem, or if you have any questions.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dell Powerconnect 3548P - a reference not rattling, or allowing access to the web console

  Hello

  I wonder why we are able to access our PoE switch through the web console http, I can connect via the serial port and the Dell Setup Wizard, we have all the information and our ip address for that switch to 10.0.3.192 255.255.255.0 with a default gateway of 10.0.3.1.

  So if trying to ping so still times out, and if you connect to it and change the pc ipv4 parameter to point to him, he will not allow access via browser.

  Any suggestion or help would be greatly appreciated, thank you.

  I've reconfigured everything ManageEngine OpUtils connection to stack Dell via SNMP v2c and the issue seems to be fixed: stack of Dell was to be online from 4 pm and noting happened during the many analyses of OpUtils SNMP. I think that the problem is resolved.

  For your convenience, Dell battery of newspapers (RAM and file those with the maximum detail level) show not record SNMP loss or drop.

  Thanks for your suggestions.

  Marco Dodi

• Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

  I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

  This happened to someone else? Is it I can do it fix it?

  Hello

  Since you get such a serious mistake, I would use the free incident reports.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Allow access to the internal area

  Hello

  I'm a consultant that I need to allow access through our PIX. We have a box on our internal network, it needs to be able to configure. I was thinking something like:

  access-list app tcp host 192.178.16.6 host 201.126.22.54 eq 2301

  Access-group app in external interface

  static (inside, outside) tcp 201.126.22.54 10.1.1.112 2301 2301 netmask 255.255.255.255

  consultants address is 192.178.16.6

  Our external address is 201.126.22.54

  Our internal address is 10.1.1.112

  necessary port is 2301

  It looks all right? I'm not exactly sure how would he initially 'connect' to our network... I would think he would use our IP external, correct?

  Looks good, here you have another model.

  acl_out list allowed access host tcp SRC-Public host IP YourPublic eq 2301

  Access-group acl_out in interface outside

  static (inside, outside) 2301 YourPublic-IP IP local 2301 netmask 255.255.255.255 tcp 0 0

  You may need to run a =

  clear xlate

  If you have changed or have changed the static method. Please note that this will reset all the session.

  sincerely

  Patrick