my home network that gets the best connection
I have my router connected to my pc and one switch (another router) connected to the computer of the children upstairs and other connected via wyfi who gets the best signal?
Because in most cases, the Internet itself is significantly slower than any local LAN connection, there will be little difference that the bottleneck is the internet.
About the only exception is a very common wireless network. Because all of the wireless clients are connecting to the same base station all have to share this speed of connections. So the performance of the base station must be divided between the number of clients. As mentioned WiFi speed tends to be higher that is practically possible and any additional loss occurs between customers, this can have an effect.
Tags: Windows
Similar Questions
-
How to get the best connectivity WLan on Satellite U200
I wonder if everyone is disappointed by the scope of the U200 wireless.
I always find that my laptop shows 2 bars for their my BT hub (on the floor) when my eeepc located beside the laptop displays 5.
I also found in other places that my partners laptop detects wireless networks much more that I do.
I would prefer to explore the possibility of increasing my wireless connection before moving my BT hub to give me a better reception. being able to find the hub with my laptop wherever I am at home (like my partners)
Anyone got any ideas please?
OK, a few points of view but no ideas... I've now experimented with an external wireless adapter
I have a toshiba satellite pro u200 with built in WiFi. I have also 2 adsl providers in the House (one is cancelled as soon as I am happy with the new - but I'll take the opportunity to experiment at the mo to try to resolve some problems)
I have a wireless router in my office (the service of Virgin Media 2 MB - VM), the other is upstairs (BTHomehub 8 mb - BT)
Using the built-in tosh Wireless adapt if I'm sitting 2 laptops side by side on my desk both pick up VM 100%. (tosh and eeepc)-c' is the case that the router slot in the Office!
If I'm sitting the same 2 latops on my desk and get them to connect to BT, the onlys tosh gives 2 bars, the eeepc 100%. (by bars, I mean view available networks - see 5 bars to show the strength of connection)
If I then plug an external 108Mbps Netgear WG111T Wireless USB 2.0 for the tosh connection adapter improves to 4 bars.
can I do the built in WiFi on the tosh to improve things or am I better to use an external adapter. If I use the outside how tosh knows which adapter to use? as I have the switch wireless to the position we don't if this activate the integrated?
Allow the pc show the network show the icon when connected and can see the speed to 54Mbps - whatever that means?
shouldn't I expect to see 108 Mbit/s if that's what the external netgear is capable of?
-
I can connect to my home network, but all the other networks do not work... Error window says:
Windows could not connect to the (X)? network name?
[Link] Solve problems
[Link] Learn more about Internet connection problems
I gave security, uninstalled reinstalled wireless - uninstall security firewall reinstall and not go...
Windows 7
Hello
- What network are you trying to connect to?
- You are not able to connect to the Internet?
- Are you able to connect to the other network with wired network?
Try the methods provided and check.Method 1:
Check out the link and follow the steps.
What is network discovery?
http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discoveryMethod 2:
Check out the link and run the troubleshooter.
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsMethod 3:
Reset the TCP/IP and check. Check out the link and follow the steps.
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in WindowsMethod 4:Check out the links and check out them. -
Where can I get the best version of Windows Movie Maker that allows me to publish movies in FULL HD? For windows 7 rc?
Hello, sebianoti
Please use the Forum for answers and help to test Windows 7!
Windows Movie Maker is no longer included in Windows 7. Be sure to check the Windows Live Movie Maker beta available at http://download.live.com/moviemaker.
Let us know if that helps.
David
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello gentlemen, someone can help me, I can't install adobe creative cloude, more late to install Premiere Pro, as update internet explore, I have the good connection and etc., but appears anything but the applications screen that gets the dowload error message, I do?
Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application
-
I've upgraded to the latest version of Firefox, but I always get a message on my home page that says "you are not on the latest version of Firefox. Update today to get the best of the Web! »
You can see this message under the Google search box on www.google.com/firefox which is the old default Firefox homepage. It seems that this page is no longer maintained by Google. You seem to have the latest version of Firefox.
If you want as the Google search page as homepage, change your homepage to Subject: House (a new version of the old homepage Google/Firefox update is now integrated into Firefox).
Also see-> https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version
You can also see your version on the help > troubleshooting information displayIf this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update if necessary:
- Plugin check-> http://www.mozilla.org/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
- Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
- Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
- Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox
-
You are not on the latest version of Firefox. Update today to get the best of the Web!
Whenever I update my firefox, I get this message, you are not on the latest version of Firefox. Update today to get the best of the Web!
It - http://www.google.com/firefox - is the old Page to start Firefox used by the Firefox 3.6 and earlier versions of Firefox. I think that Google assumes that you are using an older version of Firefox, as they hard-coded message 'upgrade' in this page - all versions of Firefox see this message.
From version Firefox 4, Firefox uses a 'local' with the address Start Page of Subject: House. It looks like the old start Page, but this isn't exactly the same thing.
See - How to set the home page
-
I start the Firefox browser.
When the start page shows, I get just below the Google search box:
You are not on the latest version of Firefox. Update today to get the best of the Web!Not unusual, but when I go on the site to update it looking for a minute and then tells me I have the current version of the software.
If you use the www.google.com/firefox as homepage site that previous versions of Firefox 3 use as homepage you can ignore the message about not using the latest version of Firefox on this page.
Google seems to keep this page.
The current versions of Firefox 4 + is no longer use this website from Google as home page, but use the build-in on: home page as the home page.
Google assumes that you are using an older version of Firefox if you still visit this site, and warns you that you are using an older version of Firefox and invites you to update.
You can use a different page than the homepage as subject: House or www.google.com or www.google.com/ig (iGoogle). -
I have a HP computer and I try to get the best performance on it
Dear community,
I have a HP computer and I try to get the best performance on it, but it does not work. I try to update the drivers and use the memory of storge on USB keys and other stuff like using Microsoft Security Essenticals it is sort of: wered because there is no no way around my problem that way happens to you guys, please I want to just play and have the best performance that I can handle it.
I think I'll put my memory to 8 GB of Ram or 16 GB of Ram.
Thanks for your help.
Original title: Windows 7 HP 2000-369WM
Hello
Before upgrade you your RAM, check at HP for the specifications of your computer to see what max amount and type of RAM your motherboard will / can use, or download and run the Crucial Scanner:
http://www.crucial.com/USA/en/systemscanner
Also, if you use Windows 7 32 bit, 4GBs is the maximum RAM that can be installed, with the exception of Starter which is 2GBs.
If you are using Windows 7 64 bit, what are the limits of RAM max for each edition (there is no Starter 64 bit)
Home Basic 8GB Home Premium 16GB Professional 192GO Enterprise 192GO Ultimate 192GO _________________________________
And follow these steps to keep your device works properly:
Search for malicious software with the FREE version of this program.
This is the right link to download included.
And does not accept the option "Pay for the version" trial installation
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
You can clean your hard drive using these two methods.
"Delete files using Disk Cleanup"
Using the free CCleaner program:
http://www.Piriform.com/CCleaner
In NO case use the registry cleaning Option in CCleaner
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Make sure you have the latest updated drivers:
Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
What are the other steps, which does not include some of the above:
"Optimize Windows for better performance.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.
"How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
- Type the following command and press ENTER:sfc/scannow
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
See you soon.
-
How to set up the hearing to get the best possible recording.
Hello. I'm a complete noob to your help and understanding are greatly appreciated.
I use Windows 7, Samson co1u mic and audition cs6.
I would like to know how to set the hearing to get the best possible recording. I'm only audio recording for a podcast.
I record in a 12 x 15 typical room in my home office.
Thank you.
He is not hearing, you must set up - simply recording what send you it, and it does not change in the slightest. What you need to do, is get the vocal microphone so that it picks up your voice in the best conditions it can - and it will be a combination of the microphone technique and possibly some changes of scenery if the room is particularly reverberant or echo-y.
The microphone must be ideally on a support, and you need about 8-9 "of her, but ideally not directly talk to him. In other words, he won't be directly in front of your mouth; If you put it there, you stand a much better chance of picking up the sibilence and plosives ("ssss" sounds and pop). So just below or just above level of the mouth, and very slightly to one side usually works quite well. Made a windshield. I dream of recording direct speech like that without the help of a.
You can set it up like that at first and see what it sounds like. If you get a lot of 'place' sound in it, you may need to put curtains of some sort behind you (the sensitive direction of mic's is this way, of course), which will reduce noise reflected from the walls. Being farthest from the walls is generally a good thing - more near the center of most of the sounds of spaces better because of this. If there are windows with curtains or drapes, then close them - large glass surfaces can make its rooms even worse. If you are going to do a lot of this, and have trouble with the room, then one good patch is one of the laboratories reflection filters themselves. Initially, I was rather dubious on one of them would work well, but after trying, I am convinced - it's a great way to keep a lot of room on the microphone.
-
I keep getting the "this connection is not approved" in all the sites when I use Firefox on windows laptop 36.0.1 8. How can I overcome this.
Hi vijaysampath, please make sure first that the date, time, and time zone are set correctly on your system. If this does not solve the problem (or it is already set correctly), a possible solution depends on different factors:
- What is the error code indicated under Technical Details on the error page?
in case the error code is equal to sec_error_unknown_issuer, please try to add an exception on the bottom of the error page to verify the certificate, as shown on the attached screenshot:
- What information about the issuer of the certificate contain?
Please take these two pieces of information. Thank you!
-
Hello, I have problems with Creative Cloud Packager. I bought this product yesterday and since then I can not download completely all components. 59% or 65% of the download I get the message: "connect to the internet and try again." I am connected to the internet through Ethernet, I checked my connections through various steps recommended buy Adobe to see if my connection is correct and he is!, so why I can't complete the download process. I feel frustrated because I have clients awaiting results of my work that I can do right now. I have read all the information on the Adobe pages but nothing shows that can help solve my problem also the way things are described sometimes seem complicated and exotic as; not everything I understand particularly when it comes to some technical descriptions or abbreviations. I would be grateful someone help and advice on this topic. Thank you Nina
Hi Nina,
This link might help: cloud creative activation and troubleshooting of sign-in
Kind regards
Sheena
-
I get the error, "connect to the Internet, try again."
I receive a new notice update for creative available cloud. Impossible to download, get the message "connect to the internet, try again." I am connected to
Internet. Tried a dozen or more times. Don't download, get the same message.
http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-
How can I get the best quality when creating a DVD
Hey everybody
I really hope you can help because I'm more frustrated. That is the problem.
Each month, we create a DVD with all the latest trailers on them playing in video stores.
Here are the steps that we take1. download the trailer for quicktime 720 p on the web
2. We then change the first Pro CC
3. we add a graphic overlay (its a 1280 X 720, 72 dpi TIFF) I use the CC Photoshop preset for it
4 export the project to the h.264 (.mp4) format (flow target 7.5, 7.5 maximum Bitrate, quality use Mailhot invalidate) it comes out beautiful in HD 720 p.Then we open again CS6
1. start a new chronology
2 import our .mp4 file
3. define our transcoding. Now, here's the problem, I tried each preset. With custtominzing, our most recent has been...
Then go us to the author of it. But when its done, it is so blurry you can't read text on the screen. Now, I know that DVD IS NOT HD, I get it, but it must always be readable? That's the best I can get? Here are a few screenshots (sorry I had to take with my camera to the DVD and you can see how blurry.)Any help would be appreciated as our client is really getting annoyed with the quality. Society before us used Premier Pro and still but it came out in a most pleasant way. Im just lost here.
Export first as MPEG2-DVD. Or something without loss to export even if you have only a compression.
-
I tried to enable Mozilla Firefox today by using the normal and systematic method by clicking on the icon of Firefox.
Whenever I tried, I got the same message "Connection Refused".
I went on the site of Firefox and read the message regarding the disabling of Java, so I opened the ADD ONS and some Plug-Ins and off Java.
Still no change, so I stopped and restarted my computer.
I get the same connection refused message.What needs to be done to restore Firefox?
The advice you provided has solved the problem.
Thank you jscher200.
dgreen6603
Maybe you are looking for
-
having a problem with 123flashchat.swf
Tring to enter a chat room,Initially he wrote me that I'm missing 123flashchat.swf, so I tried to install, but something went wrong.Now when I try to enter a chat room he opens all windows over time but still can't me in the chat room
-
Can I open all mine email with a master password?
After you enter the master password, I have to enter the password for each of my email also accounts.Let's say for 20 accounts that I need to get 20 different passwords, and it's a lot of time. Pouvez Thunderbirdstore all my passwords, so I can open
-
I try to connect the digital video camera Sony DCR-HC21 to computer Windows XP download from videotapes and to edit and burn to DVD. Have output DV on camera and input Firewire on computer. The computer does not recognize the camera device. Just repl
-
How upgrade 64-bit Windows Vista to Windows 7?
How upgrade 64-bit Windows Vista to Windows 7?
-
Windows 7 available in Portuguese, but not in English?
I'll start from the beginning. I have a mac. I want to do a bootcamp with windows installation 7. Windows NOT 10 or 8. Honestly, I would consider trying to install bootcamp with XP before either of these goofball operating system. UM. I attend Univer