My hp deskjet 920C is now incompatible with my HP omni 120

Similar Questions

• Google chrome is now incompatible with windows 8, starting 26/08/2013 with an update of windows.

  Original title: Programs programs Applications application compatibility

  On my system, google chrome is now incompatible with windows 8, starting 26/08/2013 with an update of windows. Does anyone else have this problem?

  Hello

  Your question is better suited to answer by Chrome support. Check out the link and contact support for chrome.

  https://support.google.com/chrome

• DeskJet F4200 Series CD Incompatible with Windows 7

  Hello!

  Now I have a new HP G62 Notebook with Windows 7, 64-bit, and the CD for my Deskjet F2400 gives an incompatibility message when inserted in my notebook. The CD is for Vista and earlier operating systems.

  I downloaded/installed something called "dot4patch_reboot", I found a solution in the support section, but always the same 'inconsistent' message appears.

  A sollution that works?

  I suggest you go to this site www.hp.com/support

  take note of the number of your product for your printer, then put on this Web site and when you get to the page where you will be asked for your operating system checked if there is a driver for a windows 7...

  If there is:

  1. choose the proper win 7 x 64, and then click Next

  2 locate the pilot field and then select or search for full features software

  3 dl and install

  ENJOY!

• Upgrade to OS El Capitan. Has been Keychain errors. Now incompatible with the very power not past the login screen. Try Apple cat and give up after spending more than 30 minutes, avoiding so to repeat myself (last I checked, I'm not a fool).

  Upgrade to OS El Capitan this morning on the laptop of my daughter because she saved his laptop school (apple) at what his cell phone the school had problems. Had to upgrade to the latest OS as its portable school was on the latest OS and its docs to school would not open on his personal laptop (she was on the Mavericks). Fallen on admin password so questions concerning with the cat and who sets obtained but by fixing what they then created many problems of Keychain. I was directed to a support document, which did nothing. I was told to finish the upgrade to El Capitan, and maybe that would fix issues Keychain - BAD! Now, it's a 50-50 chance that when I get to the sign in page - I'll either get arrested here with the keychain error pop ups or it will allow me to the desktop view. I'm beyond disgusted at this stage because what should have been simple has become a living nightmare.

  I checked through the archives and found a lot of Keychain, but nothing seems to fix mine.

  I get the following:

  * talagent wants to use Keychain 'local products '.

  my admin and my signon password do not work

  so I press Cancel, then I get

  * Messages Agent wants to use Keychain 'local products '.

  my admin password and access code does not work

  so I press Cancel, then I get

  * CommCenter wants to use Keychain 'local products '.

  my admin password and access code does not work

  If I press Cancel, then comes continuous pop-up error message Agent

  Help, please

  Have you tried to reset the keychain:

  Reset your Mac OS X Keychain - Apple support

  See you soon,.

  GB

• Mac ppc is now incompatible with most Web sites who need Flash Player?

  I uninstalled Flash Player to shoot badly to another problem I had last week. It was not the cause, but when I tried to re - install, Adobe would only my system download and install Flash Player 9. I'm sure I had a version of 10 before, but I can't say for sure. In any case, this is when most every site that requires Flash Player (including the Adobe site has stopped working for me on this system by saying that I have to install Flash Player 10.2.

  As a ppc running osx 10.4.11 is clearly on the Adobe download page can use Flash Player 9!  This means that this computer has just become obsolete for use on the web?

  It doesn't seem to be a thread on the web but nothing concrete, and I find no download anywhere for Flash Player 10 under 10.2! Same Version Tracker as far as I can find has nothing.
  
  Can you confirm that it will not work with the site to Adobe Flash Player 9? Has it been changed or upgraded in the last week or two?

  And... Do you have any ideas where I might be able t find a version of Flash Player 10 under 10.2?

  All these sites were working on this computer until last week, so I know it's possible (unless, of course, all these sites have changed last week).

  Is there anything else I can try?

  Thanks for any help!

  I have attached a few screenshots.

  

  Hi, the version of Flash Player has been archived: http://kb2.adobe.com/cps/142/tn_14266.html 

  You will need to download the Flash Player 10.1 (81.7 MB) and save it to your desktop. Then you will find the 10.1.102.64 version for the Mac platform. There is also a Readme file.

  Here are the instructions to Apple Discussions:

  * Flash Player for Mac PPC *.
  Latest version of Adobe Flash Player for Mac PPC was in November, 2010 with the following output versions 10.1.102.64 for Intel based Macs. To update you need to download:

  Flash uninstaller: [http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst, os = m10.6], make sure you get the right one.

  Install Flash 10.1.102.64 [http://fpdownload.macromedia.com/get/flashplayer/installers/archive/fp10.1.102.64_and_9.0. 289.0archive.zip] open archive to reveal still more archives and several files. Select: flashplayer101r102_64_ubmac.dmg

  To install:

  (1) run disk utility and check your hard drive. If the hard drive reports errors, then it will have to repair the first (another topic). If she checked, run repair permissions in disk utility.

  Quit all applications to ensure that nothing is actively using Flash.

  Run the application uninstaller. Adobe said: "Adobe recommends that you restart your computer before installing a different version of the reader."

  Run the Setup program
  Use disk utility to repair permissions on your computer. This is important when installing anything whatsoever from Adobe.

  7-restart your computer.

  You do not have to these instructions, but I posted if you do.

  Hope that helps.

  eidnolb

• Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?

  Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?
  If I need to can replace it where I get an older version?
  Thank you

  Firefox 4 versions and later, do not run on a PowerPC Mac and require at least OS X 10.5 and an Intel Mac.

  The latest support for your operating system version is 3.6.26 , you are fully updated.

  For more information, see:

  Firefox 3.6 system requirements

  Firefox 10 system requirements

  [For older Mac that are not supported in versions of Firefox 4 +, if you want, try TenFourFox for PowerPC currently running Mac 10.4.11 and 10.5.8]

  http://www.floodgap.com/software/tenfourfox/

  http://tenfourfox.blogspot.com/

  https://code.Google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• hP Deskjet 3070 B611a: x compatibility with Mac OS 10.10.2

  HP Deskjet 3070 e all in one printer B611a is not compatible with Mac OS X 10.10.2 to scan.

  Can I apply to ensure, or do I have to buy a new printer and how long before that is incompatible with the new OS systems... shadowl

  I have finally mastered it the scanner! Thank you for your help, I am very grateful

• Microsoft Natural ergonomic keyboard 4000 is incompatible with Windows 7

  When I type a letter, I receive a letter and a number (ex: I type "s", the computer prints "s7"). I tried redownloading drivers, but I get an error message that this keyboard is incompatible with Windows 7 and it wont let me start the CD.  I looked on the MS site for a fix, which is there, and I downloaded it, but it did not work.  I am always told the keypad and the software are incompatible.  I went through this process 3 times and now I'm frustrated that I spent $80.00 on a MS product that says that the site of MS is compatible with Windows 7, but it doesn't help with this computer.

  64-bit IntelliType Pro 8.0 download page is available here .  IntelliType Pro 8.0 32-bit is available here .  Is that what you have already installed?

  Vote if you find it useful.  Click on brand or propose as answer if that answers your question.  It will help others find the answer in the future.

• printer Deskjet 920C driver

  I have a Deskjet 920C I need to download a driver.
  My OS is Vista Home Premium Service Pack 2.

  This computer is never put on line Internet, and I don't want to do it now. I searched online, but the only drivers I found require a scan, a separate driver installer or another method that requires the Internet connection.

  I tried every avenue ends by "you don't need to download a driver, it is included in your Windows Vista."

  This could be in a perfect situation, but my situation is far from it!

  What is the name of the file from the HP driver for the Deskjet 920C printer in Windows Vista Home Premium, and is there a download site that will allow me to download this single file?

  I need to download the file on this computer (Linux) and transfer it to the Vista system via a USB key. This should not be difficult, except that Microsoft and HP seem to think that we, the users are too stupid to see given the necessary information, at least that's my opinion now.

  Thanks for any help you are able to give.

  I stumbled upon a solution that worked. I deleted the printer in Control Panel, run "Add a printer" and choose "add a local printer. (The weird part is "Use this option only if you do not have a USB printer.") He presented a list of printer where I chose HP 920c. In order to complete this action, I received a menu of connection ports. The list of ports has only a USB input: 'USB Port virtual' which I chose. The dialog box "Print a test page" appeared and the test page print. I clicked on "Finish" and completed the work.

• AT & T Incompatible with WRT54G v8.0.0.7?

  I've recently updated my v8.0.0.2 to v8.0.0.7 WRT54G firmware so that I can use it with my PS3 at the school.

  I am out of the House for the spring, and, of course, I brought with me, my router as my parents (a v8.0.0.2 WRT54G) router does not work with the PS3.

  I plug, get bars full on my laptop and nothing. It does not work. PS3 is still in the box. I stopped, reset the router, blah blah blah, still nothing. Full bars, but pages don't is not loading.

  Now, the v8.0.0.2 of here at home works well; as soon as I plug it in, I can immediately browse pages. But as soon as I plug my v8.0.0.7, it stops working. However, I use it at school all the time, for everything without any problems. It works as well my friend.

  The only difference between the two is where we have the Charter School (and my friend's House) and AT & T home.

  V.8.0.0.7 is incompatible with the AT & T DSL service for any reason any? I can't find any other explanation.

  DPEP.

  Router of the Charter to the school only requires a router with DHCP auto configuration enabled to run.

  AT & T uses PPPoE, so all I had to do was plug in my parents name and password, and it worked. As simple as that. I have overthought this maximum is Aussie an easy solution.

• Version of the operating system incompatible with Startup Repair tool

  I'm trying to reimage dell inspiron 1525. Operating system is Windows Vista. Error received halfway through restoration. Has been reduced to system recovery options. Startup Repair has chosen to be tell version of operating system incompatible with Startup Repair tool. Now I cannot do anything else.

  Hello
   
  1. you use the correct version of the Vista disc to run Startup Repair?
  
  2 you also all error messages /codes when you startup repair?
   
  I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.
   
  Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.
   
  a. Insert the Windows Vista installation disc.
  b. restart your computer.
  c. If prompted, press any key to start Windows from the installation disc.
   
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
   
  d. choose your language settings, and then click Next.
  e. click on repair your computer.
  f. Select the operating system you want to repair, and then click Next.
  g. on the System Recovery Options menu, select the memory diagnostic tool.
   
  Once scanning is complete, check to see if the problem is resolved.
   
  Access the link below to learn more about Windows recovery options in Windows Vista.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem
   
  If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.
   
  Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.
   
  You can also contact Dell support and check if you need to replace any hardware.
   
  Aziz Nadeem - Microsoft Support

• Vista does not start, fails to Startup Repair indicating that the version of the operating system is incompatible with Startup Repair tool

  I use a laptop Dell XPS M1330, under Vista Home Premium 32 Bit. The laptop froze, I tried to do a system restore, which did not work. Now the laptop goes into startup each time put on repair. A message window appears saying "Startup Repair cannot repair the computer automatically. Startup Repair window says "Startup Repair could not detect a problem. Diagnostics details say: Root cause found: the operating system version is incompatible with Startup Repair tool.

  I tried to use the Dell Factory Image Restore to restore the system, but it does not end. I get an error message instead. There is no details, it's just a small window with an X and the Word error.

  I also tried to use resettlement Dell DVD, but that doesn't seem to work either.

  Vista does not start at all, not in either safe mode.

  I just ran to the Dell Diagnostics tool, and that is to say that the integrity test of memory has failed... No idea how to solve this problem?

  I'm at a loss and helps woukld be appreciated.

  Hi James,

  Ø are you using the correct version of the Vista disc to run Startup Repair?

  I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.

  Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.

  A. Insert the Windows Vista installation disc.

  B. restart your computer.

  C. Si you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  D. choose your language settings, and then click Next.

  E. click on repair your computer.

  F. Select the operating system you want to repair, and then click Next.

  G. in the menu system, SelectMemory diagnostic tool Recovery Options.

  Once scanning is complete, check to see if the problem is resolved.

  Access the link below to learn more about Windows recovery options in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.

  Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.

  You can also contact Dell support and check if you need to replace any hardware.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not transfer files. An address incompatible with the requested protocol was used.

  Microsoft. It's so hard to get where you want to go on the site.

  I wish they still had the cat where you enter just a few things, and for free, it instantly opens a window of instant messaging to chat with microsoft.

  Well, I have a dongle bt USB and when I right click and click send a file, it gives an error

  Windows could not transfer files. An address incompatible with the requested protocol was used.

  With windows xp, I plug it and he can move 2 drivers, "microsoft bluetooth enumerator" and "generic bluetooth radio".

  in windows 7, it installs the same 2 drivers

  I pair the device from the phone and it didn't work. while I was looking for the computer and it does not even, but file transfer

  It works totally fine XP and with the same drivers! just different os versions.

  I went to Device Manager, click on set to update driver and he know that later is installed

  BTW, it's a generic radio bt, and it was $10 do9ller micro dongle.

  However, there is no brand name.

  but it works under windows xp? but not 7?

  Windows xp and windows 7 are duel boot, so it's the same material, b/c windows xp and windows 7 is on the same hardware

  If I use the VM vmware, I can transfer files

  Microsoft sucks... I mean except xp. He is old, but it's the best version of windows there, Runnin' on minimum 16 MB of ram and 400 mhz cpu... I luv xp, no more errors

  Hello

  Check if the same device works fine on another computer with Windows 7 installed. Also, try to send files from the phone to the PC and check what is happening.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  You can try the steps below and check if that helps get the Bluetooth dongle to work.

  (a) click Start and then click Run.

  (b) type regedit and then click OK.

  (c) locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {e0cbf06c-cd8b-4647-bb8a-263b43f0f974}

  (d) right click on the folder, click on delete.

  (e) exit and restart

  Now, try to find your device and send the file. It should work.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why World of warcraft is suddenly incompatible with windows 7?

  I just discovered that World of Warcraft is suddenly incompatible with windows 7. Why is it so?

  Diana

  Mine works fine.
  Open WoW and to the upper left corner of the pitcher go to options > game preferences > uncheck 64 bit if it is.
  It is copied from a blue response on the WoW forum
  With the release of Patch 5.0 and Pandaria mists, the repair tool was wrapped in the game. The game will now be stream repair automatically when it detects corrupted data files.

  There's always ways for the repair feature must be blocked to fail. In these cases, you will still encounter an error, but there are some things that you can do to solve the problem.

  Please note that if you have or find an old copy of the repair tool, it will not work with the current game. The old repair tool cannot identify the current version of the game and only tell you to reinstall. This isn't always the best answer, so I would recommend first using the link above.

• Incompatible with Firefox 31.0 Dashlane I try to recharge 30 Firefox 3.0.3. but it keeps downloading 31.0? How can I stop Firefox to upload on the new version?

  My Dashlane 3.0.3 is incompatible with Firefox 31.0. I meet this problem every time there is a new version of Firefox. In the past, I would go to the archives and get a Firefox from a number of earlier version and load this. For some reason, (probably simple). I will load the lower version and it will automatically install the next version number. I can't stop the automatic updates. I had installed Firefox 30.0 and it worked with Dashlane 3.0.3 but the system automatically downloaded the version more recent 31.0 number and of course, this is inconsistent. Dashlane is not able to write codes fast enough to install in due course to work with Firefox. I did was to say that Firefox was the only browser that I use and I used it for many years. I don't like Crome or IE. You're just a browser better, that's all.

  I didn't mean that somewhere, I lost my toolbar in Firefox and could not find a use which was also good. Just an info. You can send me any resolution you can find at: [email protected]
  Thank you for your help.

  You should not use older versions of Firefox, they are insecure, their use can lead to your personal information being stolen. Please update Dashlane to its latest version.