My HP Desktop 3510 is not commuicating with my computer, even if its Connect USB drive throug

Similar Questions

• Sansa View does not synchronize with the computer after the first connection

  Hey guys,.

  I just bought a refurbished Sansa View which has the latest firmware on it. I logged on to the computer and selected "view in the folder. I downloaded some stuff and disconnected.

  Now, whenever I try to connect it again, the computer or the Sansa Connect. The Sansa start loading, but the 'Sync' screen does not appear on it. The computer shows nothing and the device does not appear in Device Manager or my computer as it did the first time. If I look through the USB devices in Device Manager I see a device using the power, but that's all.

  I tried the "MSC Mode" setting in the Sansa View settings, but it is not always connect. Don't hold.<" while="">

  I use Windows XP, SP3.

  Any help would be really appreciated,

  Thank you

  Nevermind, apparently, you need to do to reset once changed the settings in MSC mode on the player. It works fine now!

• We get an error "windows 7 was not compatible with my computer" during the download of Windows Media Player for Windows 7.

  * Original title: Windows Media Player for Windows 7

  It seems that my computer (windows 7) did not come with Windows Media Player. When I tried to download it, it has stated that windows 7 was not compatible with my computer and gave me a windows xp download. Why is this and how would I be able to get the version for windows 7?

  Hello

  What version of Windows 7 do you have? What is an "N" or "KN" version that doesn't include WMP 12?

  Start - type in the search box-> WinVer find upstairs and double-click it.

  Media Feature Pack for Windows 7 N and Windows 7 KN (KB968211)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=31017ed3-166a-4C75-b90c-a6cef9b414c4&displaylang=en

  ========================================

  If this did not help to tell us which version of Windows you have.

  ========================================

  Check the Task Manager to make sure that WMPlayer.exe is not already running, and if it is complete the process
  on this subject. Click right tab taskbar - TaskManager - process.

  -------------------------------------------------

  Make sure that Windows Media Player is on.

  How to enable or disable the features of Windows 7
  http://www.SevenForums.com/tutorials/5023-Windows-features-turn-off.html

  -------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ---------------------------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• 20 of Firefox is not compatible with my computer, how can I go back to Firefox 19?

  20 of Firefox is not compatible with my computer, how can I go back to Firefox 19?

  Hello, you can simply download the latest version of getfirefox.com and install it on top of your current installation to go back.
  It shouldn't be so compatibility issue with firefox beta on windows xp - have you experienced specific problems?

• do not proceed with the installation even after restart of firefox add-ons

  Add-ons - do not proceed with the installation even after restarting firefox, I deleted the files of 3 extensions (several times) in the other suggestions and rebooted. Still don't work yet saying will be installed when you restart.

  This has happened

  Each time Firefox opened

  == after update to 3.5 and continued to 3.6.3

  Hey even once, I did a complete uninstall and reinstall Firefox and it fixed the problem for me.

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Dell v313 printer - my printer is not communicating with my computer - I need enable two-way communication in the printer properties

  My printer is not communicating with my computer. He always tells me to activate the two-way communication option in the printer properties dialog box.

  How can I do this?

  MichaelMcQuillar,

  Please check your virus protection and firewall. They seem to block communications from the printer.

  Rick

• my updates are not proceed with the installation even if it is powered. I've had a wndows XP SP2

  my updates are not proceed with the installation even if it is powered. I've had a wndows XP SP2

  my updates are not proceed with the installation even if it is powered. I've had a wndows XP SP2

  If you mean that Windows updates are not proceed with the installation, it is because the support of Windows XP Service Pack 2 ended on July 13, 2010, so no updates were available for this purpose since then.

  http://Windows.Microsoft.com/en-us/Windows/help/end-support

  To resolve this problem, you MUST upgrade to Windows XP Service Pack 3, which is covered and a link procided further to the bottom of the page at the link above.

  Rob

• Printer is not communicating with the computer

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have problems with my Dell v305 printer I tried everything. Error message indicates that the printer is not communicating with the computer

  Hi vanessa James Sluys Veer,.

  Probably you should install/update your printer drivers for your operating system.

  Please see the link below for the Dell Web site:

  http://support.euro.Dell.com/support/topics/topic.aspx/EMEA/shared/support/DSN/en/document?c=UK&l=en&s=Gen&DN=1093016

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Lexmark Interpret S405 is not communicating with the computer and will not print

  My computer works with Windows 7 and updates automatically.  I got the Lexmark Interpret S405 for 18 months, and it has worked great until a couple of months.  When I try to print, I get an error message indicating that the printer is not communicating with the computer.  When I check the printer, it shows he's ready.  The print job shows that it is ready to print, but nothing happens except for this message.  When I try to erase the impression, it really takes a lot of time - usually have to unplug the printer so that it can finally clear.  Then it still will not print if I try again unless I restart the computer.  Lexmark support page says that there is a problem with Windows 7 and their product.  All the solutions for this problem yet?

  Computer model of the bridge ZX6970, OS 64-bit, intel CORE CPU I-13 3.30 GHz, Windows 7 Home Premium.  Can someone advise a fix for this problem?  Thank you!

  Hello

  Have you tried to download and install the updated firmware for the Lexmark Interpret S405 from the manufacturer's website.

  If this isn't the case, please download and install it.

  Download Firmware for your printer!

  We know the results.

• Printer/scanner and CD/DVD drive do not communicate with my computer.

  My printer/scanner and CD/DVD drive do not communicate with the computer.  A message reads: command line compiler Visual c# has stopped working. All the drivers for my devices are updated and current. Exclamation points are noted in these devices in Device Manager. This seems to be a registry or a motherboard problem. While in the Device Manager, I clicked and uninstalled devices and then restarted the computer, hoping that the pilots would be automatically reinstalled correctly. It did not work, and nothing has changed. I've never had a problem like this before. Any suggestions?

  Problem has been resolved by removing the UpperFilters registry key.  Both the old and new readers are working properly. Thanks for the help and time.

  Ed

• SideWinder X 4 does not work with my computer

  Original title; SideWinder X 4

  I can confirm that the keyboard works with other computers, but the keyboard does not work with your computer and with which I intend to use it. The keyboard works in the BIOS and turn on until at halfway through the Windows startup animation and then turns off and unresponsive. I have the drivers installed on the site, but the keyboard does not work, and Device Manager reports the missing pilot. The problem told to install a driver, but this utility is unable to find a driver.

  Steps to try to solve this problem, I took:
  Uninstall, reinstall

  Keyboard to use free software (still doesn't)

  Install the version 8.x from the site

  Any suggestions?

  Configuration:
  Windows 7 Professional 64-bit with the latest windows updates

  Intel Core i7 860 2.8 GHz

  8 GB RAM

  EVGA Nvidia GTX 460

  Hello

  Put the computer to boot and check which application third party is added to the element start and the origin of the problem:

  http://support.Microsoft.com/kb/929135

  Note: follow step 7 to restore the computer to a normal startup.

• "This version of Photoshop CS6 and Illustrator is not compatible with my computer"

  CS6 Photoshop and Illustrator are not compatible with my computer. Y at - there is a downloadable version of CS6 Photoshop and Illustrator? I downloaded the CS6 Design and Web Premium and individually, neither worked. I have a Mac OS X Version 10.6.8

  N ° if this message appears, you are running on an old processor Core Duo of first generation on a MacBook/iMac/Mac mini and it simply is not compatible, no matter which version of Mac OS x. It lacks the specific chip components required to get the code.

  Mylenium

• Can not communicate with the server, BUT I CAN CONNECT SUCCESS TO "MANAGE SITES"

  I do NOT see the server in dw cs6 files, so I can't download or not communicate with the server, BUT I CAN CONNECT to SUCCESS OF "MANAGE SITES"... EH WELL THERE WHERE THE PROBLEM?

  

  

  In the view of the file context menu, click Remote Server

  

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.