Printer/scanner and CD/DVD drive do not communicate with my computer.

Similar Questions

• Aspire 5740g and the dvd drive does not appear in 'my computer '.

  I had to have a new installed hard drive I got an error message saying old default disk.

  I also had a clean install of windows 7 that I was uncertain if my discs that I created would be ok.

  So I have not all the gifts that have been installed on the laptop like new. Now, I find that the dvd drive is not displayed in my computer and nothing happens when I insert the disc.

  This has happened a couple of days and I did a restore of the system to a previous restore point.  Does anyone know how to solve this problem.

  I also do not have the secure egis - any ideas how to get this back

  Then... your DVD is probably defective.

  did you check in the BIOS if it is listed on bootable devices?

  Press F2 at startup, if it is not listed, it is defective.

• I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  Download and install the trial version of Lightdroom CC.

  Then enter your serial number, follow these steps

  How to convert a trial CC 6 Lightroom Lightroom

• the cd/dvd drive does not appear in my computer or in other places! so I can't start the CD

  After upgrading windws vista to windows 7, I can't find cd/dvd drive in my computer (sony vaio) .plz I can do to fix this?

  Hello Rash0411,

  Thank you for your message.  First start by going to your computer manufacturer's website and download/install the latest driver for your device.  We will check the following:
  Click 'Start' > right click on 'Computer' > select 'manage '.
  Click on Device Manager.
  Expand "readers of CD-ROM/DVD-ROM" (you see a yellow!, or you see your drive at all?)
  If you don't see any of your drive, you may need a bad connection of your drive power to the motherboard or power.
  Please let us know.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My printer which is connected to a home group to not communicate with the computer laptop and Netgear is not connected to my computer

  Original title: 305 lemark printer s device

  My printer will stillnot communicate with the laptop.  It is in the homegroup?  Help

  In addition, my netgear will not or connect to my computer?

  Thanks in advance for your help

  Gary

  Hi Gary,

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. you receive an error code or message?

  Please follow the methods and mark the question below:

  Method 1:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Open the troubleshooter group living:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 3:

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

• DVD drive is not recognized in my computer on the Satellite 300 - 11V

  When I opened my computer all that appears is the hard disk devices and other devices. I looked in the Device Manager and variants for DVD players, there's a! in a yellow triangle next to my DVD player.

  I clicked on properties on the DVD player and displays the disk is corrupted or missing (Code 39). I used windows to seek solutions, but it doesn't seem to be all. Are there other ways to solve this problem?

  My OS is Windows Vista.

  The first thing I recommend is to remove the drive from Device Manager. Then, restart your machine and start Vista. After starting, it must be reinstalled the drive.
  If not, then you can just check if your drive is defective: pick up a CD or DVD that is bootable (for example the recovery disk) and check if the player starts the CD.
  But don t forget to put the CD/DVD as the first drive in the boot order.

  Welcome them

• The satellite A65-S1063 DVD drive does not work with this type of disc

  Hello world
  have a strange problem - my combo does not read dvd - r of a box. Everything is ok, when I put a disk anywhere else, but in this particular area or empty or written are recognized, it crashes just after trying to read and the lamp burning. The most funny thing is that when I check the discs on other computers, everything is fine with them. Any ideas?

  Hello

  For me it s case. You have updated firmware and this kind of DVD is not listed in the list of firmware. As Stefan has suggested, try a different brand of DVD.

• My dvd drive does not appear in my computer. It is powered but sends no data. Someone knows how to solve this problem.

  I don't know what to do. I tried the Microsoft ATS but no dice.

  Hi Michelle,

  1 did you change on your computer before the show?

  I suggest you to perform the following troubleshooting steps to resolve this problem.

  http://support.Microsoft.com/kb/982116

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Samsung tablet driver does not connect with my computer (windows 7)

  Hello I have a Windows 7 right and whenever I connect my Samsung galaxy tablet 3 USB it says device driver software was not successfully installed. I checked the updates, it didn't work, but I check the properties of the device it says error code 10

  Hello jasmine,.

  Thanks for posting your question on the Forum of the Microsoft community.
  1. If it works much earlier? If Yes, did you of significant changes to the computer before this problem?
  2. Have you tried to connect the tablet to another USB port on your computer?
  3. Are you able to connect the tablet to another computer?

  I understand that you get an error code 10 device when you plug your tablet computer. This error is due to some kind of unspecified driver or device problem. In your Windows Device Manager is not able to start the unit due to a driver-specific is not recognized. So, let's try a few steps to start in the right direction, diagnose the root cause and solve your problem.
  Method 1:
  Try to follow the steps described in the following link and check if the problem persists:
  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Method 2:

  You can also download the Software Kies from Samsung for Windows that allows you to connect your phone to your personal computer, makes it easier for you to synchronize data between the devices.

  Samsung Kies 

  Hope this information is useful. If the problem persists, please post back your results for further assistance, we will be happy to help you.

• Printer will not communicate with the computer.

  Original title: printer nocomunicate

  my printer Lexmark4200series Mod.x4270 and my compurete Compaq Presario5300no communicate

  Lexmark confirms that the version of your installed printer software is supported in IE9 (yet)?

• CD/DVD drive is not recognized on Satellite Pro L10

  Hello. can someone help me with the following: -.

  My DVD drive is not recognized on my computer and in the material properties, it says that my CDW/DVD driver may be damaged and needs re-setup or "updated".

  the (r) drive is shown as TSST Corp TS-L462A - can I get the update
  Download Driver from the site? (is it free?)

  Thanks for any help

  Paul

  Hi Paul,.

  You don't say what model of laptop you have, but generally speaking if you are using Windows XP then you will use the standard Microsoft drivers for your scanner.

  However, you can Toshiba drivers and utilities download from Toshiba web site by clicking on the Support section and downloads and selection of files to download. You will need to fill in the details of your laptop so that the list of appropriate driver (unless you have provided these details when you register).

  Kind regards

• DVD - RAM drive does not appear in my computer (Satellite M30)

  Hello
  I have a rug * a DVD-RAM UJ 820 in a Satellite M30
  It seems that the driver does not work and the DVD unit is not showing in my computer - the device however seems to work - I was told a solution may be to download the driver and re-install again. Any idea where I can get that? You have any other suggestions on how to fix this?

  Thank you

  Hello

  drivers are located on the download site for the driver from Toshiba:
  https://EU.computers.Toshiba-Europe.com
  under Support & downloads, download drivers

  If this does not help, look around this forum. I saw some other threads on this DVD player.

  Good bye

• Satellite L500 - 1CQ PSLS0E - CD/DVD drive does not work - driver problem?

  Hello

  My DVD player does not work.

  There is power to it. The engine turns when I eject and reinsert. Troubleshooting Control Panel for the equipment and devices said it is a driver problem, but cannot fix it. Problem with the driver.

  I reinstalled it from the Toshiba site.
  It records in the right place?
  I am Windows 7 64 bit and chose the right driver for it.

  Should I use the 64-bit?
  I have 3 MB of RAM which was the spec when bought.

  If I wanted to change to 32 bit how you take you without the CD/DVD drive?
  Is there any point in doing this?

  Thank you

  Richard

  Hello

  To be honest I m a bit confused.
  You are not able to boot from THE disks; Windows disk, disk recovery, disk Linux?

  If it of the case, then it means that your CD/DVD drive is faulty.
  Why? Because the CD/DVD drive is recognized and controlled by the BIOS when booting from CD or DVD.

  When the Windows operating system has started, the CD/DVD drive must use the Microsoft common driver which is part of the Windows operating system.
  This means that you n t need to install ALL the drivers in order to get the job of CD/DVD.

  If you can boot from any disk, but if the CD/DVD drive is not recognized by MY computer, then I recommend this:
  http://support.Microsoft.com/kb/270008/en-us

  Before you remove the upper and lower registry filters, remove the CD/DVD drive in Device Manager and then go into the registry and remove the filters. Restart the unit.

  Good luck

• My cd/dvd drive does not work, can anyone help me?

  My cd/dvd drive is not listed in my computer or Device Manager, or anywhere else. When I put a disk in the laptop, nothing happens.

  Hello

  Have you tried all of the suggestions listed here?

  http://thefreeandeasyguidetopcs.com/354/common-problems-CD-DVD-drives/

• Error "this graphics driver is not compatible with this version of windows" when you try to install the graphics card

  Title: windows 7 Enterprise 64-bit

  I have hp Pavilion dv6 2138 ca for computer pc laptop and intel hd graphics and nvidia grahics on my windows 7 Home premium 64-bit, but after I've upgraded to windows 7 Enterprise and try to install the graphics driver nvidia. It is said

  the NVIDIA Setup program cannot continue and this graphics driver is not compatible with this version of windows.

  while I chose the latest graphics driver from the hp Web site.

  kindly tell me, that means the sentence above means and what programs and features must be changed in windows? or what steps should be taken to install nvidia graphics?

  answer me

  Thank you

  Hi Hamdullah,
   
  Welcome to the Microsoft community.
   
  "I understand from the description of the issue, you do not know the error' Nvidia graphics drivers are not compatible" when you try to install the drivers. I will definitely help you with this problem.
   
  (1) what is the model of the graphics card are you using?
   
  Method 1: If the NVIDIA GeForce GT 320 M graphics driver, I suggest you to download the Nvidia graphics drivers from the link and check if it helps.
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100095-3&cc=us&DLC=en&LC=en&OS=4063&product=4125893&sw_lang =
   
  Method 2: If the problem persists, I suggest to select the graphics driver and check if you have any driver update available.
  http://www.nvidia.com/download/index.aspx?lang=en-us
   
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.