My HP G62 a22se does not work after update the latest version of the Bios

Please can someone help me?

After upgrading the bios version, my notebook

Does not yet give me only black screen

I tried the button window + B with power to restore the old version it doesn't work too.

can all of my work in this tower you all help me to solve it with my car

Sorry for my English little

Thanks in advance

Advertisement

Thanks to allah

I solved the problem of my self

using the

WinFlash for HP Notebook System BIOS (for notebooks with Intel processors)



and I have LCD I put plug VGA screen taken from my knees

the LCD has worked as a laptop screen and I solved the problem

and the laptop screen works again

Thank you

Tags: Notebooks

Similar Questions

  • Tecra A2: brightness F6 Fn + F7 does not work after updating the BIOS of the screen

    Update bios to 1.40 VICTORY at end of January. Since the failure of keys F6 & F7 then to increase or decrease the brightness of the screen. Is it a coincidence or is that updating the bios the culprit! ??

    Hello

    Usually, the update of the BIOS shouldn't have a bad influence on the drivers of Toshiba and the performance of the operating system.
    There must be another reason the FN key down.

    Initially, I would say to reinstall the common modules. Please check if this will help.

  • Sound does not work after updating the Audio driver on Satellite P100-248

    After an optional update to the audio driver in my Toshiba Satellite P100-248 conexant high definition, there's not more solid. I know it's the driver who caused the problem because it back to the windows generec driver and a reboot resolved the probem the first time around. Recently I had problems with my microphone so I was looking for a newer driver and installed upgrading the driver again by mistake.

    Now the noise disappeared again and I don't want to go back to the generic driver, but I can't find the conexant driver appropriate through Toshiba because the socket driver does not list my model. I tried a few of the drivers for the other models of the P series, but without success. Any ideas where I can find my driver? I'm on Vista 32 bit SP1.

    > but I can't find the conexant driver appropriate through Toshiba because the socket driver does not list my model.
    Hmm... Satellite P100-248 belongs to the PSPAGE series and this series of mobile is listed on the European Toshiba driver page sp I t really know what you're talking about.

    You will find also all the Vista drivers available on this page.
    I would say, download the audio driver and install it.

  • Ethernet USB adapter does not work after update to sierra mac

    Ethernet USB adapter does not work after update to mac sierra.

    Please solve this problem as soon as POSSIBLE

    Hello guatamshah,

    If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

    The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
    Reset the management system (SCM) controller on your Mac.

    https://support.Apple.com/en-us/HT201295

    How to reset the NVRAM on your Mac.
    https://support.Apple.com/en-us/HT204063

    If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
    OS X: about system information and System Profiler

    https://support.Apple.com/en-us/HT203001

    If she does not appear in the information system, see the articles below.
    macOS Sierra: If a USB device does not work

    https://support.Apple.com/kb/PH25343

    macOS Sierra: check your device's USB connection

    https://support.Apple.com/kb/PH25567

    However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

    macOS Sierra: Add a network service
    https://support.Apple.com/kb/PH25279

    If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

    Kind regards.

  • As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

    As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

    This may be caused by the Tab Mix Plus extension

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do not click on the reset button on the start safe mode window or make changes.

    You can try to install the latest Dev version of Tab Mix more if you use this extension.

    See the sticky on the forum of Tab Mix Plus:

  • 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

    Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

    In addition, the HID-Compliant touch screen driver is missing.

    Please help me solve this problem, thank you.

    Hi there @BryanHech,

    Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

    How you did update the drivers?

    You use Windows Update?

    Have you checked to see if the driver has been disabled?

    Have you tried to run the Troubleshooter in Windows?

    Have you tried to do a hard reset?

    Have you tried a update the BIOS and graphics driver?

    Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

    Have you tried to Configure the display key?

    Have you tried to activate the driver in touch screen device manager?

    Please follow these steps to see if you can activate the touch screen:

    • Open the Device Manager
    • Find "Human Interface Devices"
    • Expand "Human Interface Devices"
    • Right-click on "touch screen HD compliant."
    • Click 'Activate' (if available)
    • Restart your laptop.

    If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

    To use the system restore in Windows:

    • Go to the Search
    • Type of Control Panel
    • Click on Control Panel
    • Click System
    • Click on the System Protection
    • Click the System Protection tab
    • Click on System Restore
    • Click Next
    • Choose a restore point
    • Click Next
    • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
    • Click Yes to confirm

    When the system restore is complete, you'll be up a pop that says that it has been completed.

    Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

    Thank you!

  • ASUS laptop computer: touch screen does not work after update of windows 10

    My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

    Hello

    Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

    Kind regards.

  • Tecra M7: Tablet does not work after closing the lid

    Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20

    Does not happen on hibernate or sleep.
    I have the set cover to do nothing on close.

    Hello

    What do you with Tablet does not work after closing the lid?
    Is - what the laptop freezes or what? What happens exactly?

    Closing the parameters adjustable lid to Hibernate or standby mode or no action.
    These settings can be defined in configuration power saver actions.

    If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!

    Best regards

  • autorotation does not work after update 8, 1 wind - W510

    I have a tablet with docking station and 32 GB w510

    the autorotation feature does not work after update to 8.1 windows. the lock button does not work and there is no option for the autorotation lock in the settings.

    I ve installed the latest driver form acer download page and Windows update.

    then I tried a clean install of windows 8 and yet once installed can I 8.1 and it still does not work.

    What can I do?

    PS the camera does not work

    -solution for me! ----

    I don't know what happened, but I'll tell you what I did not last:

    I have the European version of Windows 8.1 N(without Media Feature Pack)

    1. reinstalled microsoft silverlight.
    2. search for update---> silverlight update available!---> installed!
    3. reset
    4. installed the 'Media Feature Pack for N and KN from Windows 8.1 versions"from here: http://www.microsoft.com/en-us/download/details.aspx?id=40744
    5. reset
    6. Search again---> new available updates updates---> installed
    7. reset!

    now, camera, autorotation and all the apps work for me. I hope this will help you

    Best regards

  • Dual booting of Z3 tone does not work after update Marshmallow

    Dual booting of Z3 tone does not work after update Marshmallow? Worked with normal lollipop

    I don't think he has a...

  • Gyro does not work after update 6 Android on z3 D6633 double

    Gyro does not work after update of the marshmallow on Xperia Z3duos D6633

    Issue edited by Rickard

    @dipuvellara

    Could you try to restart in safe mode and test again?

  • APEX 5. Dynamic action on the CHANGE event does not work after applying the filter on IR.

    APEX 5.

    Dynamic action for the CHANGE event does not work after applying the filter on IR.

    Event: Change, selection Type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry

    Real action

    Selection type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry, Action: run the Javascript Code

    Is TI WHEREAS behavior?

    I know, I can work around this problem by using the Refresh event and javascript, but I prefer DA and if possible Change event.

    Concerning

    mdyla

    mdyla wrote:

    It is, how to force them reallocate dynamic Action in the event of CHANGE of the input elements after refresh of IR region.

    Set the dynamic scope of the event action to Dynamics.

  • First Adobe Pro CC does not work after update code 0xc000001d

    First Adobe Pro CC does not work after update code 0xc000001d

    W7 OS 2

    Hi Gernots,

    For a fix, update for first Pro CC 2015 (9.2).

    Thank you

    Kevin

  • G72-a20EM screen has stopped working after updating the BIOS F.48.

    How is it possible that BIOS update recommended could turn off the LCD screen.

    Currently I see almost anything on the screen, but vga port works. But increasingly,.

    Intel graphics card is not recognized.

    G72-a20EM screen has stopped working after updating the BIOS F.48.

    What can I do to fix that?

    Good news!

    I found the working version, and it is version F.08.

    Supposedly new version have different Active cables, and this is the reason why the screen is dark.

    So, case closed, everything is perfect.

  • Apple pencil does not work after update to iOS 9.3.4?

    My Apple pencil does not work after installing iOS 9.3.4, I tried to forget this device and it Peel again. No change, it still fails. Any fix for that?

    Never mind y ' All, I reset my iPad Pro and all works fine now. Weird, but as long as it works all is good

Maybe you are looking for


HashFlare