My HP Pavilion dv5 1126em does not boot the system.

Similar Questions

• Pavilion FX285AV dvd5: Hp Pavilion dv5 FX285AV does not recognize the DVD in the drive

  My cd/dvd RW drive + will recognize and play CDs of music in Windows Media Player, it will recognize the DVD as if a cd of music but will not play and has the error message that there is not enough memory. In HP Media Smart DVD it opens and turns and then said: "no disc inserted in the drive."   Troubleshooting all said that the drive works very well. Y at - it a fix for this problem? How would I know if it's a damaged optical disc?

  Hi bcwain,

  I've done some additional research not enough memory error you receive and found something for you to try. Try the best answer to this Yahoo Answers link.

  If this does not work try using VLC Player, it is a free media player and open source. I use it on my XP machine at home that some videos have had a problem with playing on Windows Media Player. You can download it here.

• "BOLD" does not meet the system requirements? -BES

  This is getting ridiculous.

  Tried to install my Orange BES "BOLD" - and I get this message on the WAP site:

  View

  I'm sorry that your device does not meet the system requirements that are needed to support BlackBerry App World.

  Yes - I'm in the United Kingdom

  No - there is no policy of BES blocking apps

  Feature: "BOLD"

  OS: v4.6.0.162

  Carrier: Orange UK

  Plan: BES

  2 devices on different networks - and AppWorld does not work on either! is this an April fools joke?

  This question seems to have been resolved - try to access the same address now and it will work.

• Smart phone BlackBerry Smartphones does not meet the system requirements that are needed to support Blackberry App World

  Hello

  I just all new BB Curve 8900 on Vodafone. Its the first BB I've owned and I seem to have a bit of trouble. When I try to download the App World, I get the following error message:

  "Device does not meet the system requirements that are needed to support Blackberry App World"

  How can this be?

  OK then... interesting for Vodafone to push support far... Well, by I guess.

  So I guess that I change their instructions... rather than to remove an installed version of the AppWorld in the way they suggest, I suggest go to:

  Homescreen > Options > Advanced Options > Applications

  See if BB AppWorld is listed as installed. If so, highlight (but do not click) it and then press the BBKey and select Delete. If she wasn't there, then continue on these steps.

  Then do a batt pull reboot:

  With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.

  Then re - activate your THS:

  Homescreen > Options > Advanced Options > host Routing Table > BBKey > sign up now

  Then re - send all the service books:

  http://www.BlackBerry.com/BTSC/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB02830&SLIC...

  Then do another reboot batt-pop.

  Then, get a new link for AppWorld from here:

  http://NA.BlackBerry.com/eng/services/appworld/download.jsp#tab_tab_download

  And re - download and install it.

  I hope it's going to go right. If not, then it could still be useful a call to Vodafone...

  See you soon!

• I can't download lightroom cc because "adobe does not support the system" I use. How the hell am I supposed to know what system he supports and how do I get the system that God Adobe says that I have? Googling lightroom cc requirements made n

  I can't download lightroom cc because "adobe does not support the system" I use. How the hell am I supposed to know what system he supports and how do I get the system that God Adobe says that I have? Googling lightroom cc requirements does not help.

  System requirements | Creative cloud

  The system requirements (lightroom)

• HP Pavilion g6-1001sq does not recognise the Kingston SSD 300v

  Hello

  I recently bought a disc SSD Kingston 300v to replace the default value of HDD on my HP Pavilion g6-1001sq laptop. The SSDS works on SATAIII (3), but the data sheet on the provider's site mentions that it is backward compatible with SATAII specification (2).

  However, when you try to boot my system after installing the SSD, I get a message saying that there are no available boot drive. I updated my BIOS to the latest revision (F6.6), but it does not solve the problem.

  I saw on the forums of HP support, this is a common problem with other models as well, but I was wondering if this question has found a solution or at least a reasonable explanation (preferably confirmed by HP as well).

  I would like to know if the SSD firmware update might help. I'm a skeptic little about it since they already mention that SATAII is taken care of, but I'm willing to try that approach as well, if there is a reasonable explanation for it.

  Hello:

  Have you installed an operating system?

  If you do not install an operating system on your drive, you will get a no boot device.

• HP Pavilion 500 - C60: HP Pavilion 500 - C60 does not recognize the container pictures xD

  My PC has a slot with an image suggesting an SD card (showing the cut upper right corner). However, the number of internal contacts seems to be two times more than necessary by an SD card. Result: no SD card fits into the slot, but a XD card seems to have the exact number of the required connectors by an XD card. And indeed the xD fits perfectly into the slot.

  So far so good.

  Problem is that the Windows 8.1 does not recognize the card. I searched using Google but couldn't find a solution.

  Can anyone help?

  I ended up buying a Vivitar 5 in 1 card reader that plugs into a USB 2.0 and works fine all bypassing the hp pavilion integrated card reader. This allows me to read my old card xD, but there is a work-around, not a real solution. I rest my case.

• HP Pavilion dv9000 - XP does not see the HARD drive, how to install it?

  Hello

  I try to install XP SP3 on HP Pavilion dv9000, but XP Setup does not see the hard drive.

  Can you please point me in right direction - what I do files and how to add them to the XP SP3 installation CD necessary?

  I guess that somewhere there is a step-by-step detailed guide.

  Thank you

  Enter the BIOS by pressing F10 at startup. If you have the option of Bios Setup to disable the native sata mode, XP will install without problem, no sata driver needed. It will be on the tab of the System Configuration.

  
  If you do not have the setting in the Bios, it's the driver sata for your machine:

• Pavilion dv6: Notebook does not receive the signal of 5 GHz

  Hi, recently I bought a new modem router with the capacity of 5 GHz. After the establishment of the net, my laptop does not have the SSID. Other devices receive the SSID and connect to. How can I check, discover and recognize the net working at 5 GHz

  Hello:

  Most likely your laptop is only a single wireless card band (2.4 GHz) (model ending in bgn suffix).

  Virtually no consumer class computer laptop HP made at the time came with a wireless card dual band (model ending in abgn or agn suffix).

  Even those made today... most of them still have cards of single band.

• Satellite L450D - 13 X does not start the system - PXE - E61: Media test failure

  Hello

  I turned on my laptop after only a day and it will not load
  As a first step, he said start the system restart or start normally,

  I chose startup repair, but it does not complete the repair.
  It now comes with a repetitive screen with PXE - E63: media test failure, check cable of
  PXE - MOF: exit ROM PXE

  I tried Googling the answer and go into the BIOS menu and to the section boot but I can't seem to change anything at work.

  There are, and exclamation mark in front of what I think is my hard drive on the screen

  ! HDD1/SSD1 TOSHIBA MK2555GSX-(S2)
  CD/DVD HL - DT - ST DVDRAM GT20N-(S4)
  FLOPPY DRIVE
  LAN

  I have nothing in the disk drive and I don't have a recovery disk.

  Any help would be appreciated

  Thanx

  Leon

  Hello

  For me, it looks like a malfunction of the HARD drive and so the BIOS can not find a bootable device and goes to the last possible bootable option which is LAN.

  The exclamation mark in front of the HARD drive indicates that there is a problem with the HARD drive so I think you need to replace the HARD drive and you need to reinstall the system.

  PS: What laptop do you have exactly?

• Install Windows 8 does not recognize the system drive

  I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.

  Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.

  The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.

  I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.

  Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.

  This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.

  Thank you in advance for any assistance.

  Windows 8 Pro 64-bit (full version) - OEM
  Intel Core i5 - 3570K
  Card mother GIGABYTE GA-Z77X-UD5H
  Crucial Ballistix 2 x 8 GB DDR3 1600
  Crucial M4 2.5 "128 GB SSD (system disk)
  WD Green WD30EZRX x 4 (data readers) 3 TB drive
  Rosewill Challenger-U3 ATX Mid Tower Case
  SeaSonic M12II 620W 620 Bronze PSU
  ASUS DVD writer

  The DSS must be LOW LEVEL FORMATE.

  Once, there may be no other [HDDs] not connected to the SATA ports.

  Install Windows 8 Pro now.

  [Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.

• Pavilion dv7: my Pavilion Dv7 laptop computer does not start the system recovery options

  So it told me to turn my phone off, then back on whilist cling the key F11. But when I do it my is laptop beep loud noise and rest on the logo hp, whilist is on this screen is says 'System recovery F11' in the lower left corner and does not move on the screen, how to fix this?

  Hi @Jaytee2 ,

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP laptop and get a blank screen or black at startup. Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a linkto computer does not start for Windows 7.
  
  Here is a documentthe performance of a Windows 7 system recovery.

  Do you have records system for this laptop?

  I'd be happy to help you if necessary. How can I find my model number or product number?

  Please let me know.
  
  Thank you.

• Wireless on HP Pavilion dv8013cl switch does not illuminate the blue light.

  Months ago I made a configuration change that disabled the switch, but I don't remember what I did.

  Now, I want to activate the wireless switch, but don't know what software it controls.

  I reinstalled the wireless hardware card and reinstalled the wireless driver, but the switch still does not work.

  Any ideas?

  Problem solved!

  I found a solution and it worked.

  Simply uninstall HP Wireless Assistant, then restart.

  I used the Windows Add / Remove Programs Control Panel to remove.

  Because it worked after restart, I did not reinstall the HP Wireless Assistant software.

  I can do it at a later date and download to my computer is

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=228&LC=en&DLC=en&cc=us&lang=en&product=1154655

  Text to the URL http://www.wirelessforums.org/network-troubleshooting/hp-wireless-assistant-issues-35150.html where I found the solution:

  "I found a solution. The problem is with your Hp wireless assistant. This software is used to toggle the wireless through the switch outside of your computer. After uninstalling Hp wireless assistant-problem solved. When I rebooted my computer and without wire was back, I went to hp.com and reinstalled the wireless assistant. This solution lasted a week until it happens again, and the same solution worked. I intend to redo these steps until I can find a new version of the Hp wireless assistant. However if you choose, you can run your network wireless Hp wireless assistant, but your outside knob does not work. »

• Had to replace the motherboard: System does not boot, the XP installation disc runs to a failure.

  Thus, the motherboard in my PC started to die.  I replaced it.  Start-up of the new system has prompted a Safe Mode boot.  Choose Safe Mode, the system restarts after mup.sys.  Choose the last known good startup the initial windows screen appears briefly, then restart the system.  Boot from the original installation disk, all kinds of drivers charge then the last message that appears is loading Windows Executive.  A
  BSOD appears stating something to the effect of an error with the hard drive, verify the presence of virus, remove the new hard disks, etc..  Hard drives is a virus.  So, how do you round a re - install defective and/or repair or a defective Mode start safe mode with new material?

  Thank you

  Hello

  Since you have replaced the motherboard, you may need to reinstall the operating system.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Does not open the system preferences of the Apple menu

  Anyone know of a good solution for this?

  A few weeks ago I started noticing that I couldn't open my application system preferences in the Apple Menu bar (via the Apple logo > system, or via the WiFi icon Preferences > network, or even Preferences by right-clicking on the desktop to change the desktop background, etc.).

  WHAT WORKS:

  I can open the system preferences if I click directly on the application icon or you try to open it from the dock.

  I can open the app in the Apple menu if I register as another user.

  WHAT DOES NOT WORK:

  The problem does not go away when I restart in mode 'start '.

  The problem does not go away when I run disk utility.

  The problem does not go away when I remove the "Finder" and "System Preferences".plist file in the Preferences folder in the user's library.

  The problem does not go away when I remove the files "Preferences panel" bury of the Cache in the user's library folder.

  The problem does not go away when I zap the PRAM.

  The problem does not go far if I replace the system preferences application from a recent backup.

  I was about to just try and re-install the MacOS, but thought I would try the forums first, since the Apple Support site said that it should not be necessary if the problem is only limited to a user's profile. I found a lot of entries in the forums for this issue dated a few years ago and have tried most of the solutions, but I don't think that you can repair the permissions of the disc more on El Capitan.

  Anyone have any ideas? Thank you.

  Given all of the things you tried that don't work, over time it would take to troubleshoot more, you could restore OS X in 45 minutes to an hour on a broadband connection using OS X Recovery.

  Start your Mac while pressing the command + R keys. From there, you should be able to access the built in utility to verify and repair the disk from startup (if necessary) and OS X using OS X recoveryof restoration.