Pavilion dv7: my Pavilion Dv7 laptop computer does not start the system recovery options

Similar Questions

• Computer does not start, the Error Recovery window is continuous

  Yesterday, I upgraded to a software called Turbo Lister for eBay.  The computer must restart for the changes to take effect.  It's the start of my problem.  After the reboot, I got Windows Error Recovery screen.  He recommends launch Startup Recovery or start Windows normally.  I tried both and keeps it just goes back to the screen even as a loop.  I tried to boot in safe mode does not work.  I have inserted the reinstallation cd and run Startup Repair and that has not worked.  Help, please!  Is that what I can do about it or he needs to see a professional?

  Hello

  You can try these since the Windows CD/DVD

  1. the system back restore to before that has happened

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  2 SFC and CheckDisk from the Windows disk command prompt

  SFC/scannow

  RE-RUN the disk

  Chkdsk /f /r

  RE-RUN the disk

  then try Startup Repair.

  (there is space after C and before / k and this before / f and before /)

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• computer does not start after system recovery

  Hello, I so got a bad virus on my laptop acer ms2253 so I reinstalled the operating system using the recovery partition. but now it turns on, only the battery indicator flashes. I reseed memory live, hard disk and dvd player and it won't always turn. I have also taken the battery and tried to turn it on, all nothing happens.

  Hello, I so got a bad virus on my laptop acer ms2253 so I reinstalled the operating system using the recovery partition. but now it turns on, only the battery indicator flashes. I reseed memory live, hard disk and dvd player and it won't always turn. I have also taken the battery and tried to turn it on, all nothing happens.

  Hey fluffytuzki

  If you experience any problems during or after the use of the acer recovery partition, you will need to contact acer directly

  It's their recovery process not microsofts

  http://support.Acer.com/us/en/default.aspx

  Walter, the time zone traveller

• Computer does not start, the registry is damaged. What should I do?

  Original title: I have a computer gateway running vista home. The computer does not start and system repair fixed. The error is the root cause "registry is corrupt. What should I do?

  My system stopped responding and I had to make a hard stop.  When I tried to restart the computer, I had a mistake of lying to start automatically.  Commissioning and repair screen came and did his thing.  He was not able to solve the problem. The end result was an error indicating that the registry has been corrupted.  What should I do to get my computer running again?

  Hi Laurayne,

  You can read the following article and try to boot from the disk Installation of Windows Vista to perform a restore system from Windows Recovery Environment.

  What are the system recovery options in Windows Vista?

• HP pavilion laptop computer does not start

  When I turn on my laptop it does not start. It goes to a blue screen that indicates it should be repaired. Help please

  Hello

  Error code 24 characters long drive Self Test (DST) would indicate that hard is defective and must be replaced.  This is also consistent with the startup problem you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Acer Aspire laptop computer does not start

  Lites button power screen stays black, the system tries to start, but he keeps power button light turns off.  I have a new disc of windows 7 32 & 64 bit.  I have the disc as a dvd before I turn on the power button.  With the new windows 7 dvd of 20 to 30 seconds to place power turns off.

  Anyone with knowledge of this problem would be grateful.

  Thanks in advance

  Hello Mojo,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?

  2. What is the brand and model of your computer?

  3. What are the troubleshooting steps you have tried so far?

  I understand that you are unable to start your Windows 7 system. To prevent your system from automatically restart, try to access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. Select the option disable automatic error system reboot. Also, I suggest you try the following steps of diagnostics to verify if you are able to reach the office in one of the following modes methodical.

  Method 1:

  Please follow the underlying steps:

  Step 1. Disconnect all external devices except the keyboard and mouse.

  Step 2 I would like to start your computer in last known good configuration.

  If method 1 does not work, go to method 2.

  Method 2:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.
  Start your computer in safe mode

  Step 2: If the system works fine in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  If method 2 does not work, go to method 3.

  Method 3:

  As you cannot start your computer at all, I suggest to run a Startup Repair to repair the damaged boot system files and try to boot into normal mode. See the section: How to use Startup Repair in the following link.

  Startup Repair: frequently asked questions

  If this does not help, try to boot from a disc to install Windows 7 on the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally.

  If the problem persists, proceed to method 4.

  Method 4:

  You can use the Bootrec.exe tool in the recovery Windows (WINRE) environment to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)

  • A boot sector

• A Boot Configuration data (BCD) store

Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows 

Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Portege R100 laptop computer does not start after a while without food

  Hello

  Well there is some time, I bought a beautiful used R100 - a laptop Toshiba in passing - but now, she has developed an annoying problem. Whenever it disconnect the laptop from the power supply for more than 2 hours about (don't know if this is not longer) I can't begin the R100, even if the battery indicator is green. After pressing the powerbutton the power led lights in green, and nothing happens. The "solution" to this problem is to give the R100 some time in this 'turned on' - State and after 15 minutes, I am able to start the computer (turn market again).

  I think that this could be a problem with a battery on the motherboard that is at its limits and needs time to gather enough power to start the computer.

  I hope you can help me identify the problem with my beloved laptop :)

  Yours,

  Tobias

  p.s. I have more or less need to identify the problem and some tips how to solve - the pleasure with the surgery will be from me :)

  p.p.s. Unlike the problem of the M400 further down, I've won if the beginning focused on the hard disk to Flash. In my case the R100 does not give a glance if it does not start. - And as a reference to the other post: "Hmm, I don't remember of the R100 fan not have it at all" * huggs its r100 * "."
  And I tried unplugging all the bits of the laptop and removed the battery, waited 15 minutes and tried to turn it on. the only way to obtain the departure of r100 is the method described above.

  You have an additional RAM installed?

  Maybe you need to re-seat, or it has a intermittent or heat associated with problem.

• Mini laptop of HP 1000: mini windows laptop computer does not start

  My mini laptop from HP is saying windows has not start because the following file is missing or damaged:
  \windows\system32\config\system
  You can try to repay this file by starting windows setup installation CD using the original.

  Hi there @kgoen81

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you receive a message from a missing file, and that your system does not start. I'm happy to help you.

  First, I recommend that make you an external backup of data on the hard drive. There are several ways you can try to do that, but here is a page with a few possibilities:

  How to recover data from the hard drive to a laptop dead - eHow.com

  Also, please post the complete product and the operating system running on your laptop. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  For now I'll assume you have windows 8.

  Computer won't start (Windows 8)

  You can also visit this page, and in particular you want to go with the automatic repair options. I would try before using a full system recovery to an original image, on the previous page I linked.

  System - Boot of Windows 8 recovery options - eightforums.com

  I hope this helps.

• My computer does not start, the alarm tone the aa from the hard drive, then back to the top and is very slow...

  My Pc does not start at times, especially first time in the morning, an alarm tone sounds, then it tries to start, Frost pattern on the screen... or black at all. then after pressing the new button could start up of normal, it will be very slow. Help, please

  Hi WolfgangKlinger,

  ·         Did you do changes on the computer before the show?

  ·         You're able to boot in safe mode?

  ·         You get the error message?

  Follow these methods.

  Method 1: Disconnect all external devices except the keyboard and mouse.

  Method 2: Start your computer in last known good configurations.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Applies to:

  • Microsoft Windows XP Home Edition
  • Microsoft Windows XP Professional

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• Satellite L450D - 13 X does not start the system - PXE - E61: Media test failure

  Hello

  I turned on my laptop after only a day and it will not load
  As a first step, he said start the system restart or start normally,

  I chose startup repair, but it does not complete the repair.
  It now comes with a repetitive screen with PXE - E63: media test failure, check cable of
  PXE - MOF: exit ROM PXE

  I tried Googling the answer and go into the BIOS menu and to the section boot but I can't seem to change anything at work.

  There are, and exclamation mark in front of what I think is my hard drive on the screen

  ! HDD1/SSD1 TOSHIBA MK2555GSX-(S2)
  CD/DVD HL - DT - ST DVDRAM GT20N-(S4)
  FLOPPY DRIVE
  LAN

  I have nothing in the disk drive and I don't have a recovery disk.

  Any help would be appreciated

  Thanx

  Leon

  Hello

  For me, it looks like a malfunction of the HARD drive and so the BIOS can not find a bootable device and goes to the last possible bootable option which is LAN.

  The exclamation mark in front of the HARD drive indicates that there is a problem with the HARD drive so I think you need to replace the HARD drive and you need to reinstall the system.

  PS: What laptop do you have exactly?

• HP250G4 (M9S81EA): the laptop computer does not see the usb cable

  Hello, have a problem with HP250G4 (M9S81EA), doesn't want to install cable diagnostics. After you install the cable drivers, win10-64 cannot define it. All the drivers are installed on your laptop and work properly. The cable is the same worker checked on another laptop. None of the Google tips help not hurt for 3 days with this problem. I hope for your help.

  USB device not recognized
  Works Yusb last device connected to your computer, and windows cannot identify him.

  The request failed usb device descriptor

  I installed on this laptop Win 7.8.10 and the unit still does not work, I think it's a hardware problem of the laptop. But at the same time, other usb devices are working properly on...

  < feature name = 'Application' type = 'Description' sequence-id = "3" >
  < attribute name = "a0" value = "HPAdvSysDiag_USBPort" / >
  < attribute name = "a1" value="5.9.0.0"/ >
  < attribute name = "a2" value = "2" / >
  < attribute name = "p1" value = "09/11/2015" / >
  < attribute name = "p2" value = "F.1A" / >
  < attribute name = 'p3' value = "96.39" / >
  < attribute name = "p5" value = "" / >
  < attribute name = "p15" value = "2" / >
  < attribute name = "p16" value = "0" / >
  < attribute name = "p17" value = "0" / >
  < attribute name = "p20" value = "00000001" / >
  < attribute name = "p4" value = "1" / >
  < attribute name = "p0" value = "2015-12-26 22:45:56" / >
  < attribute name = "p10" value = "0" / >
  < attribute name = "d15" value = "F3" / >
  < attribute name = "a4" value="00.00.00.34"/ >
  < attribute name = "d0" value = "3" / >
  < attribute name = "z0" value = "94L7PW-7R07T8-XD7WMF - 8 d" 7403 "/ >
  < attribute name = "e0" value = "434" / >

  Help someone or not?

• Samsung laptop computer does not start in the DVD player

  Separated from -.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Samsung-laptop-wont-boot-into-DVD-drive/0bda7438-E472-4E90-90c0-0c4531df3944

  Do I have a problem even in the Samsung laptop. I can't boot to my CD / DVD drive! Yes! I tried settings in the BIOS. but it won't work!

  Can you help me. or mybe miss something.

  :-(  :-(   :-(   :-(   :-(

  Hi Merlandomutoc,

  Answer the following questions to learn more about the subject, you are faced with.

  1. Has no problem reading CD/DVD on your computer?
  2. What is the brand of computer?
  3. What were you doing on BIOS?

  Ensure that this CD/DVD detection of CD/DVD player.

  You must change the boot priority to CD/DVD drive in the BIOS. I recommend you consult the manual of the computer learn more about the BIOS settings or the computer manual.

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please let us know if you need assistance.

• I have a Pavilion dv6604nr and it does not start. the lites drive and then more nothing.

  I was using the computer and all of a sudden my screen looked like a candy cane horizontally.  I took the hard drive and not been able to get a bios screen, I'm looking for suggestions or the type of case I can buy to use my hard drive.  I bought a 2.5 from best buy and it does not match.

  Hello:

  You need to get a USB to SATA 2.5 enclosure "HDD.

  Have you thought about the plug of hard disk drive?

  The thing that looks like this?  That is removable. Just shoot.

  

• L50-B-1NL satellite does not start the system

  My son 2 week old laptop is more load Windows.

  When it turn it on the Toshiba start screen comes on then it starts to "diagnose you PC ' which does nothing for awhile then comes up with"Windows could not load properly and the option restore then returns to the start screen.

  I went to the bios and loaded default installation but containing the foregoing. Any help would be appreciated.

  Thank you

  Turn on the device, press F12
  Now you should see a Start Menu screen.
  Last option should be HDD Recovery

  Access the HARD drive recovery menu and choose troubleshoot
  Then Advanced Options and auto repair

  If this does not work, try refreshing the PC (without losing files)
  If that doesn't work, reset the PC (will remove all files and set the notebook to factory settings)

• Vista does not start; Startup, System Recovery repair, etc. do not work. Help, please.

  I need to know how to get my computer to the top and will again and without a hitch. When I turn on my computer, the Vaio logo has lines on it, then it flashes red and black pixelation, then goes into the Startup Repair. After the execution, he said, "Startup repair tried several times but still not determine the cause of the problem." I ran to the recovery of the system several times, and whenever it says it succeeded, but windows still does not work and I start this process again. Please help me with this situation; I need your advice.

  Hello

  because of the problem of the color, looks like you can have either a corrupt graphics driver, or for the lack of graphics hardware

  If, in accordance with manufacturer's warranty contact

  If it is under warranty, contact your local reputable computer repair workshop

  and as you say you have also problems of retrieval system, which is probably related to this problem of graphics contact your computer rmanufacturer

  It's their recovery process not microsofts