Wireless on HP Pavilion dv8013cl switch does not illuminate the blue light.

Similar Questions

• My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  Hi Heyoabc,

  Please resend your message main here.

  Nick-

• SMU-1062 q switch does not illuminate the chassis

  I have a chassis PXI SMU-1062 q I turn on with the front mounted switch, but turns off again.  Is there something wrong with it, or am I missing something in the way it is implemented?

  Never mind.  Figured it out.  I need to press the power button for several seconds, then it shuts down.

• Pavilion dv6: Notebook does not receive the signal of 5 GHz

  Hi, recently I bought a new modem router with the capacity of 5 GHz. After the establishment of the net, my laptop does not have the SSID. Other devices receive the SSID and connect to. How can I check, discover and recognize the net working at 5 GHz

  Hello:

  Most likely your laptop is only a single wireless card band (2.4 GHz) (model ending in bgn suffix).

  Virtually no consumer class computer laptop HP made at the time came with a wireless card dual band (model ending in abgn or agn suffix).

  Even those made today... most of them still have cards of single band.

• HP Pavilion 500 - C60: HP Pavilion 500 - C60 does not recognize the container pictures xD

  My PC has a slot with an image suggesting an SD card (showing the cut upper right corner). However, the number of internal contacts seems to be two times more than necessary by an SD card. Result: no SD card fits into the slot, but a XD card seems to have the exact number of the required connectors by an XD card. And indeed the xD fits perfectly into the slot.

  So far so good.

  Problem is that the Windows 8.1 does not recognize the card. I searched using Google but couldn't find a solution.

  Can anyone help?

  I ended up buying a Vivitar 5 in 1 card reader that plugs into a USB 2.0 and works fine all bypassing the hp pavilion integrated card reader. This allows me to read my old card xD, but there is a work-around, not a real solution. I rest my case.

• HP Pavilion g6-1001sq does not recognise the Kingston SSD 300v

  Hello

  I recently bought a disc SSD Kingston 300v to replace the default value of HDD on my HP Pavilion g6-1001sq laptop. The SSDS works on SATAIII (3), but the data sheet on the provider's site mentions that it is backward compatible with SATAII specification (2).

  However, when you try to boot my system after installing the SSD, I get a message saying that there are no available boot drive. I updated my BIOS to the latest revision (F6.6), but it does not solve the problem.

  I saw on the forums of HP support, this is a common problem with other models as well, but I was wondering if this question has found a solution or at least a reasonable explanation (preferably confirmed by HP as well).

  I would like to know if the SSD firmware update might help. I'm a skeptic little about it since they already mention that SATAII is taken care of, but I'm willing to try that approach as well, if there is a reasonable explanation for it.

  Hello:

  Have you installed an operating system?

  If you do not install an operating system on your drive, you will get a no boot device.

• HP Pavilion dv9000 - XP does not see the HARD drive, how to install it?

  Hello

  I try to install XP SP3 on HP Pavilion dv9000, but XP Setup does not see the hard drive.

  Can you please point me in right direction - what I do files and how to add them to the XP SP3 installation CD necessary?

  I guess that somewhere there is a step-by-step detailed guide.

  Thank you

  Enter the BIOS by pressing F10 at startup. If you have the option of Bios Setup to disable the native sata mode, XP will install without problem, no sata driver needed. It will be on the tab of the System Configuration.

  
  If you do not have the setting in the Bios, it's the driver sata for your machine:

• IPod 5 g does not illuminate, the button "home" stuck, HELP!

  So I do not know how, but this morning my ipod all of a sudden will not turn on. Tried to load for one hour, but still no response. The home button stuck so I can't reset it either. It is completely insensitive and remains the same. I downloaded recboot but it does not detect the ipod at all (because it remains off I guess). Then yes quite frustrating to deal with

  It's an IPod Touch 5g 32 GB with ios 9.3.

  p.s. the ios 9.3 worked very well for weeks. The problem occurred only at random.

  See my first answer to page 1 in this discussion.

  Turn on without buttons

• Pavilion dv9700: laptop does not turn on but lights flash

  I have a Pavilion DV9700, service tag dv9925r. When I turn on the power, the power led and the led on top flash, I can hear the fan and drive spinning, but the screen stays black and after one or two seconds the lights out, but then continue to Flash on then close. When, I hear the fan running.

  What I've tried;

  Hung still no display on an external monitor

  Removed and reinstall the memory and hard drive, not good.

  Tried the hard reset, not good.

  I put another hard drive just to see if the disc was not, but no difference.

  There is no audible beeps at all. It does not seem to go through the checkpoint.

  The laptop is dead?

  If this document does not help, contact the HP support directly using the link that I have referred to in the document I have provided.

• My HP Pavilion dv5 1126em does not boot the system.

  My laptop does not continue to boot the system, when I press the button it starts feeding and then he shows me the HP logo in the lower left corner "Press ESC for Boot Menu" does not continue, and stop there and does not respond to any button only for the power button then it turns off, I tried everything. It happened after wile recovering the session of my recovery disk.

  Please help me identify what the problem is?

  I hope I'm wrong, but it is quite possible that your hard drive is damaged and must be replaced. I'll tell you why I think so.

  Last year at the end of December, I had the same problem with my HP Pavilion dv6. When I pressed the power button only the HP logo and the "press ESC for Boot Menu" appeared. I wasn't able to get into the BIOS or to do anything else. The laptop take-out hung on the HP Logo. I gave the laptop HP service and they told me that my hard drive has disappeared and they replaced. The strange was that my laptop was fairly new, I've had for 3 months. The good thing is that they have replaced the hard drive for free, because it was under warranty.

• My wifi (f12) switch does not illuminate!

  I have a HP Pavilion dv6 running win7. All my software and drivers are up to date and seem to work. The problem I've had is switch wifi (f12) on my computer stays off constantly and it displays an amber light. I tried everything to get wifi to work, but nothing did nothing. Whenever I'm trying to look for a network to connect to, it just says there is no connection available despite the fact that all my other devices have internet and work correctly. Help, please!

  Hi StephenCourtney,

  Follow the troubleshooting steps below to update your wireless driver:

  1) Start > right click on computer > Device Manager.

  2) Device Manager > click on the plus sign next to network adapters.

  (3) right click on the wireless device and click Uninstall.

  (4) restart the laptop.

  (5) that the driver is installed automatically.

  (6) then turn on the wireless button.

• My pavilion dv7-4051 does not illuminate

  I have a pavilion dv7-4051 and I left ny computer on and it went into sleep mode and now whenever I try to turn it on, but I'm not getting a screen .What can I do

  Hi mzscorpio,

  I understand that it does not start after you perform a hard reset or on battery alone.

  The adapter works?

  You see all the lights are shining. or blink?

  You hear any beeps?

  Have you tried a different outlet?

  Do you get a blank black screen with or without errors?

• HP Pavilion 1310us g7 does not illuminate

  I went to turn on my laptop (hp pavilion g7-1310us notebook pc) and it lights and the charging light is not there. The computer is 2 years old, but the battery is new. The charger showed no sign of dying and I ran a full scan of the computer yesterday so I'm pretty sure that it is a hardware issue and not a virus.
  I tried to take out the battery and now the button for 30 seconds and repeat the same operation with the charger but nothing
  
  My phone showed no sign to die yesterday, so what could be the problem and how can I solve this problem? Thank you!

  Hi GaghanC,

  I understand that you are having problems with your battery for your laptop Hp Pavilion 1310us g7. Here is a link to to test the battery.

  Note disconnect devices from the computer before you do and make sure it is connected directly to a wall outlet.

  I hope this helps.

  Thank you.

• Pavilion FX285AV dvd5: Hp Pavilion dv5 FX285AV does not recognize the DVD in the drive

  My cd/dvd RW drive + will recognize and play CDs of music in Windows Media Player, it will recognize the DVD as if a cd of music but will not play and has the error message that there is not enough memory. In HP Media Smart DVD it opens and turns and then said: "no disc inserted in the drive."   Troubleshooting all said that the drive works very well. Y at - it a fix for this problem? How would I know if it's a damaged optical disc?

  Hi bcwain,

  I've done some additional research not enough memory error you receive and found something for you to try. Try the best answer to this Yahoo Answers link.

  If this does not work try using VLC Player, it is a free media player and open source. I use it on my XP machine at home that some videos have had a problem with playing on Windows Media Player. You can download it here.

• My pavilion dv7-1132nr does not illuminate. It operates vista 64-bit

  When I turn on my compiuter, it starts, but the screen does not light.  The flashing next to the caps lock as well as the light above end, PG. Prev flashes.  Help, please!

  Hello

  One way to test if there is a problem with the display board is to connect the laptop to an external display and see if you get video output.

  If you do not need to get the CPU replaced, the best advice I have is to find a local computer repair shop and get an estimate (and to confirm the diagnosis) for the cost of the repairs it.

  Kind regards

  DP - K