My HP photosmart C4750 pCrinter but is on "printers and devices said that it is in offline mode.
I have a HP Photosmart all-in-one C4750 printer, a HP Pavilion dv6 - 3243 phone cl, operating system windows 7 and a G from Linksys wireless router. The without wire is turned on, the printer is on, but the sign says the printer is offline. Until this happens sometimes, I had trouble scanning. When I tried to check my ink level, I received a message that the wireless was not connected? A few days ago, I changed the color cartridge and when I printed the alignment page, it would not scan. So I knew that the problem of scanning. I tried to print troubleshooting instructions and it wouldn't print. That's when I found that it was offline and I have not been able to get back on the line. I know it sounds confusing, but I'm not very tech savvy. Please try to hekp. I'm starting to think that perhaps it would be easier and faster to simply uninstall the printer and everything since the beginning of the 1, I still have the original disc if that's any help.
Well, after your part of todays message I was low enough. I spent the afternoon just clean my laptop, thus freeing up disk space, defragment the hard drive, solutions etc. Then, I decided to try the download procedure again. When I got to the part where I chose what I wanted to download I read descriptions and recommendations of which one to choose. This time I chose the "Deluxe" one"(not their word) instead of the ordinary. After the 18 + min. download instead of 7 + for the other time, I started on the facility holding my breath all the way. You can imagine how elated I had to have the message and the congratulations that the Installation has finished and succeeded. What a grueling few days. I really want to thank you for being so patient with me and get familiar with how to proceed, even though everything we have tried has failed. It is by learning how to navigate these pages that I was able to succeed. By all means I click on this icon that gives you good comments for your time and effort. Thank you once again. PS please send me a final note.
Tags: HP Printers
Similar Questions
-
I have two printers installed on my laptop, only appears. The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something. When I select "Find a printer", it gives me a list of computer icons.
Hello
Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
responsible for the proper functioning of the printer and their drivers provided.Good luck, you need to update or reinstall the latest driver.
Epson - Support us.
http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=YesEpson - support from Europe
http://www.Epson.co.UK/support=============================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
USB drive to block via group policy but keyboard, mouse, printers and USB Datacard work
USB drive to block via group policy but keyboard, mouse, printers and USB Datacard work
USB drive to block via group policy but keyboard, mouse, printers and USB Datacard work
How to activate a strategy disable Usb drive but the keyboard mouse printer and the usb datacard work machine Windows 7.Hello
In order to get better assistance to the group policy setting to block the use of a material to a computer, you should post your query in group policy on TechNet forums. I provided the link below, please use it to more assistance with Group Policy:
http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads
I can't create a new thread there matching your query will help you to better understand the implementation of group policy.
-
I can not run dinner dash hometown hero. He will be in charge, but will not play. He said that the program has stopped working. How can I fix?
Hello
Please contact the Microsoft Community and sharing this information with us.
I'd like you try to perform a system restore to undo changes.
See the article-
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings
Note:
Perform a system restore will cancel all changes made on the computer before the show. You may also lose unsaved information as well. Proceed at your own risk.
If this is not enough, then you must contact game support for assistance.
Do not hesitate to contact us for any problem related to Windows. We will be happy to help you.
-
I just downloaded photoshop elements 7.0 to a new box, and he said that my serial number is not valid. the adobe support team indicates the number is valid, but that they cannot help me
who cancel. Ugh... it was one of the other programs in the bundle of bamboo that was having a problem. Thanks again for responding, I think I'm now covered for photoshop elements.
-
Tonight I tried to install a driver for the Cam ti and he could not. Instead, he made somewhere, but I can't. And it does not appear as a program installed or peripheral? The driver I have is a Driver USB PC Camera. REV:168 H. For Windows 98.
Hello
1. you receive an error message on the computer?
2. What is the brand and model of the Webcam then?Perform a clean boot and then try to update the driver compatible with vista on the manufacturer's Web site.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.
Check out the link to update the drivers.
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly -
I just "updated" Lightroom of CS6 for CC, but now it is said this is ONLY a 30 day trial. Will my CS6 comeback after only 30 days or? I'm so confused by the present. Also, CS6 is continuing to update or it won't forget now that CC is supposed to be better than her?
If you do not want to go with a subscription (CC) then your best bet is to get away from him now and get your purchased version (6) works again for you. It's my own conclusion, but I think targeted confusion is part of the way unwanted products end up on your machine. I uninstalled the new application manager as soon as he updated a day with a CC tag on this subject.
-
I have CS4 and updated to OS x 7.5 to 10.5 Yosemite. Applications are still there, but can not be opened. After the restart, the application displays error 6. I have the
Original key, but does not have a place to enter.
We recommend that you reinstall the applications. You can use the Cleanup tool to remove the applications and products CS4 download from here.
-
Photosmart printer HP CN245B GONE all-in-one e-B110a wireless printers and devices?
There are a few updates so that you can download and install.
You will need to uninstall the current version of your front driver/software will install the software and drivers downloaded.
-
Can you please tell how to fix this please?
Hello
Please see the following links:
Warning: "Adobe software real failure of Validation...". » | Windows
Failure audit download or installation. CS6
Let us know if this helps
Kind regards
Bani
-
Original title: Vista security issues
Vista Security Guard popping up and tells us that our computer is attacked, but we bought Avast, and he said our computer is secure, and found no threat. How can I get Vista to stop bugging us?
Hello
Vista is not 'bugging' you
you are infected with malware
Vista Security is Malware
This is one of a 'family' of rogue Malware released fake security programs
Read and follow the directions of exact deletion on the link below
http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011
-
I downloaded the trial version of adobe acrobat dc and need to connect now. But he said that the computer is offline or the clock goes wrong, what can I do?
Hello
Please see the steps mentioned in this document KB sign of troubleshooting, activation or connection errors. CS5.5 and later, Acrobat DC.
Kind regards
Nicos
-
Programs crash whenever I try to print with HP Photosmart C4750.
I use Microsoft Office 2007 and Windows Vista (home). I just installed the driver for the printer HP Photosmart C4750, but I can't use it because everytime I try to print, the program that I try to print from crashes. I tried Microsoft Word and Notepad. In addition, I tried to go to Control Panel then 'printers' to try to remove the printer and then re-add, but as soon as I click the icon 'printers', Microsoft Explorer crashes too. I connect to the wireless printer. There is another user who is using this printer wireless and it works for them, and I do not believe that they are also using Windows Vista. I also tried turning off all protection antivirus and firewall, hoping that he would do something, but nothing is done. Please let me know if you have any advice. Thank you!
Hello moonsparkle,
The spooler crash when trying to open delete them the printer is a clue that you might have corrupted printer drivers.
You can try the methods below to resolve this issue.
Method 1:
I suggest that you run the printer Troubleshooter that diagnoses and repairs printing problems automatically:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Method 2:
Find the defective module that may be causing the application to crash when you try to print. You can start from the analysis of event viewer.
You can consult the following article which will help you with this:
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
You can see the link which will help you analyze the entries below Event Viewer:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
You can also post the entry in your response if you have difficulties to find errors.
Method 3:
If nothing works, I suggest you reinstall the printer drivers. You can uninstall the printer from Device Manager drivers or uninstall the Photosmart software and try to reinstall the drivers.
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think. -
Impossible to install the software for HP Photosmart C4750
Running Windows 7 SP 1 with all updates installed on a HP Pavilion series of G.
I am trying to install my HP Photosmart C4750.
First of all, I tried to install using the CD that came with the printer. When he went to find my printer on my network it couldn't find it so I had to connect it to my laptop via a USB cable (not a problem as I've done it before). I entered my SSID and password for my network and when he got to "running the Network Diagnostics" step I got the following message:
"HP software that allows networking does not, cancel the installation and reboot the PC.
Finally, it came with the box FATAL ERROR DURING the installation , which then sent the error logs to HP and downloaded the errors of Installation of the HP-windows 7. hta and then restarted my PC.
After the reboot, I ran the file Installation of HP errors-windows 7 from my office and after two reboots over he told me to go to the HP website and download the NEW Setup file that I would find there. I downloaded the program on my HD and more recent installation and he ran. He was going along fine until he couldn't find my printer. So I had to plug it using my USB cable, once more, I entered my SSID and password security. I got to the ' screenrunning Network Diagnostics and, once again, I got the same message as before:
"HP software that allows networking does not, cancel the installation and reboot the PC.
I know the printer is on my network and it is configured correctly, I can go through the windows devices and printers and install it like this but then I did not scan. This is how it all started, I need to analyze something and I can't do this without the HP Solution Center that is installed as part of the installation of the printer with the HP Installer.
I spent several HP Web sites and tried the solutions that I found nothing there doesn't.
Please tell me what I should do to get this program installed.
I have run the wireless network test on the printer and PASS all the tests, it has the right SSID and IP address. I also ran the Network Setup page and the status of the network is ready; Active connection type is wireless; For built-in Web server URL is http://HP92A5E3 and http://192.168.2.3; Firmware revision is SPM1FN0935AR; Hostname HP92A5E3; Serial number is CN031MF1D905HD; Admin password is not set
I don't know what other information would you need out of one of these reports, but everything looks normal.
Any help will be appreciated.
I set for myself... I disabled my Norton Firewall during installation and it finds my printer and ran without any problems. Sorry I haven't posted this earlier, but I had a lot of scanning to do.
-
HP Photosmart C4750 does not start
I bought a C4750 and while trying to get the printer set up the LCD screen no longer starts and it is blocked with the HP logo and the bar running at the bottom. We took a backwards thought it was broken, but now the other is having the same problem. I don't know if it's just looking for a network that he will never find? or if it has a physical mistake? because I can't get the LCD up I don't know how to diagnose the problem? Any help with this would be great thank you.
Hi all
I am pleased to announce that a FW update has been delivered and is available for download on the Photosmart C4700 so Series & Driver download page! You can access it by following this link.
I installed the update on 2 different printers, and I could get together. I had to run the update multiple times on the 2nd printer, but it took finally. So, stick with it and I would like to know how it goes.
These instructions can be found on the download page of so & driver...
Important: this solution applies only to units with serial # CN018xxxxx or later.
Installation instructions
Before downloading the Firmware update, please check that you have a working of the device software installation.
Please note: If your printer is installed using a wireless network and the printer is unresponsive currently with the HP Logo, displayed on the front panel, please connect your printer to the computer via a USB cable before continuing.
Installation steps
1. download the update of the firmware to a suitable location on your system.
2. double-click on the downloaded file to start the extraction and installation.
3. in Windows Vista or Windows 7, you will be asked to enter administrator credentials if your login privileges have no administrator rights. If you are an administrator, you will be asked permission to continue the installation. Please select this option to continue installation.
4. follow the instructions to complete the installation. If you see the screen following the end of the installation, your update firmware is complete. Press the 'OK' button to complete the update.Please note: The update should take less than 5 minutes to complete. In rare cases, this update process can freeze for long periods, display the screen below.
If the update process seems to be frozen on the screen above for more than 5 minutes, go to step 6 below.
6. turn off your printer by disconnecting the printer from the socket a/c.
7 reconnect the printer to the a/c outlet.
8. your printer will reboot. After the reboot, the update of the firmware will be completed.You will also see one of the 3 following screens during this update process on rare occasions. If you see one of the screens below, please follow the additional steps to e.
9. when any screen showing a "Try Again" button is displayed, press the "Cancel" button on the screen, if this button is activated. If the "Cancel" button is not enabled, proceed to step 10 below.
10. turn your printer off by disconnecting the printer from the socket a/c.
11 reconnect your printer to the a/c outlet.
12. your printer will reboot. After the reboot, the update of the firmware will be completed.
Maybe you are looking for
-
Delete the content in a message without deleting all email
Try to remove the text in an e-mail I received before sending the email. I select the content that I am wanting to remove, I press DELETE, but the whole email is deleted instead of just the text that I chose. Can anyone help please.
-
presentations keynote controller held in the hand
Apple used to provide a practical hand controller and undress for remote control on a Mac for Keynote presentations. It was excellent, but the device function and remote control was abandoned when infrared eliminated Apple MacBook/Pro. I know that th
-
My new Macbook Air freezes often
Hi, I bought this new 13 "macbook air with 8 GB of RAM a week ago, and it freezes about every 2 days (usually when I use Safari). Why does this happen? What can I do? It's OSX version 10.11.4
-
Satellite P10 - can't get hibernation
My PC (Satellite P10) ceased to be able to get out of the hibernation, or launched from the management system of power or when the Hibernate mode is entered manually.I get a blank screen and all the buttons and the mice died, and button / stop is on
-
All my pictures have disappeared...
I have an iPad 4 and I went on my photos and all my photos and videos have disappeared. When I go into the settings, it still says I have more than 8 GB of photos and videos, but they are not there. I tried to reboot and turn my new iPad but nothing