My internal hard drive is shown in green, but none of the folders not displayed

Similar Questions

• In disk management, it shows only a single hard drive and it's C, but it lists the size than what my old drive was that I took out

  I got a new hard drive in my computer and the old a subscribed.  I then had to reinstall Windows XP Pro.  In disk management, it shows only a single hard drive and it's C, but it lists the size than what my old drive was that I took out.  The new shows of unallocated hard disk without a drive letter and has a black bar above it. How do I show my new hard drive that is 1 TB instead of one that was a 250 GB is not yet in my computer.

  Hi Reta,

  ·         The drive appears like 250 GB even if it's a terabyte?

  ·         Is the remaining 750Go showing as unallocated disk space?

  If this is the case, you can refer to this article on how to use disk management in Windows XP:

  How to use disk management to configure dynamic disks in Windows XP

  You can follow the directions to extend a Simple Volume so that your 250 GB turns into a single terabyte.

• my creative cloud is still on my hard drive.  I want my info only on the cloud not on my hard drive. How can I get all my info right on the cloud and turn off my hard drive?

  I have information on my drive and creative cloud.  How can I get this info off my hard drive and only in the cloud for my space on my drive hard is freed up?

  Thank you

  @mikeh95269662 - Yes, you can store files in Active CC but have not in your creation Cloud Files folder on your computer.

  Creative application Cloud Desktop open the Preferences and move from the general to the creative cloud tab tab. Then, under the creative cloud Apps tab switch to the files and sync on / off select disabled. This means that no files will be synchronized.

  You can access your files from https://assets.adobe.com/files for downloading and uploading.

  

• Re: How can I add a second internal hard drive to a Satellite Pro P200?

  I have a Satellite Pro P200 with a single internal hard drive. There is a second Bay in the computer of another internal hard drive, but I couldn't find any information about it. There is enough space for a 2.5 "SATA but I do not see a connector.

  I contacted Toshiba Dutch customer service who said that it was official policy not to provide any information on a second internal drive. They also said that they would not provide parts to make it possible.

  Can anyone provide more information?

  Hello!

  I think that if there is no connector you cannot add a second HDD.
  It of Nice to have a second Bay, but it's nothing without a connector.

  Good bye

• Windows 7 does not see added internal hard drive

  I installed an internal hard drive 1 TB on a Windows 7 using SATA system.  Device Manager sees the drive, but Windows does not.  So I can't access the drive. How can I get Windows to use this hard disk (disk 1) to be the image of the disk system 0?

  Thank you

  Probably should have Setup no matter what RAID before installation.  Thinking that can be a destructive thing.  Not that I'm a great believer in RAID1 arrays (mirror) - I'm not.  I'd rather have real backups - external backups.

  Usually a RAID1 will help only if the first hard drive die an immediate death.  None of the defective areas, no viruses, no random deletion of files.  Why?  Because a HARDWARE RAID1 is an instant copy of everything that happens on the first hard drive.  If you clear hundreds of files - they are on both.  A virus corrupts the things - the other disc is in place.  Form data and scramble of bad sectors - well, look!

  I have a storage attached network device I backup on an eSATA hanging from it it stores up to another network and storage I do more selective backups to as a backup for my saved backups.  Internal - nothing.  Well, I guess that the restoration of the system and version control integrated with Windows 7...

• Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  Uhm... I think the issue here is a misunderstanding of what you watch.

  If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

  You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

  New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

  • \USERS\\Desktop\
  • \USERS\\Downloads\
  • \USERS\\Favorites\
  • \USERS\\Documents\
  • \USERS\\Music\
  • \USERS\\Pictures\
  • \USERS\\Videos\

  ... etc...

  Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

• Internal hard drive is no longer visible on the desktop iMac computer after rebuilduild

  Had to rebuild and install OS X on an internal hard drive of my iMac. I can no longer see its icon on the desktop. I can find the files n the finder so I know he can r be read and written. Suggestions as to the problem of formatting, I presented.

  Maybe you need to reassign, through the system preference.

• internal hard drive of the AirPort Extreme?

  Is it possible to install an internal hard drive on AirPort Extreme?

  NO.

  You can put a hard drive inside... as he shares the frame with the TC... but there is no control over the Board and boot rom is probably wrong.

  If you want a hard drive of your only choice is to use USB... either course, you can get a Time Capsule.

• Looking to update my first internal hard drive 2011 MBP

  Instead of recently updated to a new external drive.

  I thought it may be time to update HDD internal (500 GB) original on my MPB.

  I have 8 GB of RAM and internal light enough to keep my drive in without worrying about storage and applications.

  Everyone updated their MPB HDD with a 7200 RPM disk or an SSD?

  If so, what drives internal you would very recommend?

  Search for better performance and faster read write time.

  My 500 GB drive is barely filled. There are currently about 150 GB of data used.

  Much appreciate your comments and experience once the internal drive has been updated.

  Ant case 2.5 "HDD or SSD will be compatible with your MBP.  Here is just one example of what is available:

  https://eShop.MacSales.com/shop/hard-drives/2.5-notebook/

  Maximum capacity at the moment is 2 TB, enough for almost all users and by eliminating the need for storage of primary data on an external drive.  I currently have 1 TB SSD Crucial in my Mbps in 2010 and 2011.  Would they change a profound impact on the performance of the computer.  If the bank account is fat, install an SSD.  If not, faster turns HARD drive will be better, but not as much as the speed difference may suggest compared with the 5400 RPM HARD drive.

  Based on reputation, the best currently available SSD is OWC and Crucial.  Although I prefer HGST and Seagate HDD, one brand will do that are listed in the link I have provided.

  As a side note, your MBP will support up to 16 GB of RAM.  OWC and Crucial are the best sources for RAM Mac compatible.

  Ciao.

• FCPX think that an internal hard drive is a camera. What should do?

  FCPX think that an internal hard drive is a camera. What should do?

  YYou have probably something at the root of the drive that makes the application think that. Maybe a folder called DCIM or ITS oe a package called AVCHD. A number of things it can do.

• iMac G5 won't internal hard drive boot

  Hello

  I am a student at a vocational school student IST. The faculty member sent us old iMac G5 17 inch to set ourselves. After the repair of the motherboard, we had to install OS X 10.5 installation DVD, because the customer had erased his record for security purposes. However, the internal disk drive would not work, so we had to set the Open Firmware mode and start from a normal PC hard drive connected via a SATA-USB adapter cable. We got the OS installed and restart clicked on Setup, but the splash screen always appears as a folder missing OS. We tried to go into Open Firmware and setting the device on the hard disk, but it wouldn't boot. Other things we tried:

  -Hold the "D" key on startup to force it to boot from the internal hard drive, but it could not start

  -Optionally now to go to the menu boot device menu boot device froze after a few seconds

  -Insert the 10.5 installation disc in our external DVD drive (as mentioned above) and launch the disk utility > startup disk to restart the iMac and the start of the internal player, but same result as previously (missing the OS icon)

  At this point, both students that the instructor are almost of ideas, and I thought that post on the forums to see if there is anything else we can try before you buy another drive and charge the customer.

  Thank you in advance!

  Disk utility to partition and format the drive.

  Boot from the installation disc:

  Booting from an OS X install disc

  1. Insert the OS X installation disc into the optical drive.

  2 restart the computer.

  3. immediately after the ring, press and hold the C"" key.

  4 release the button when the spinning gear under the Apple grey dark

  logo appears.

  5. wait for the installer to finish loading.

  Once the installation program is loaded, select the country and click on the continue button. Wait for the menu bar of the screen to appear. Select utility drive in the Utilities menu. On the left should be a list of mounted drives. Select the entry of out-bumpy drive to the HARD disk (usually, watch mfgr. name and size or model number.) Click the Partition tab in the main window. Select 1 partition from the menu drop-down Partition scheme. Set the type of Format for Mac OS Extended journaled. Click on the apply button and wait for it to finish.

  At the end of player preparation, you can quit disk utility and return to the installer. Proceed with the installation of Mac OS X by following the instructions.

  If any of these categories can be completed due to HARD drive problems, then most likely the drive is dead. G5 models use standard 3.5 "SATA drives, I recall.

• Desktop P7-1039: can I add an extra internal hard drive?

  I would like to install an extra internal hard drive on my desktop HP-P7-1039. I can't find anywhere in the literature if there is an available for an extra drive Bay. If it is available, can this disc type and size I install?

  Thank you

  CErepair guide, it seems that there is place in the hard drive to another hard drive cage.  The existing hard drive is 1.5 to, but a slow hard disk standards.  Not to exceed 2 TB Windows has problems with the disks.  So look for a disk 3,5 '' SATA, 2 TB or less from a manufacturer of your taste.

• Request help second addition, internal hard drive [HP Pavilion Elite e9290f]

  Hello

  Quick question here. I am a music producer and you can always use a ton of extra space as some of my projects are 17 to 20 GB in size. My HP e9290f comes with a stock of 1 TB Seagate (I think) internal hard drive. I intend to add this DeckStar HGST hard 4 TB (7200 RPM)

  However, I am not sure, if this drive is compatible with my computer. I talked about the upgrade & maintenance manual but inside, he tells me only how to replace the current internal hard drive. The addition of this amount of space external hard drive is not an option since all my ports are used by external hard drive! Can anyone shed light on what tools I need exactly to connect this HD extra 4TB? I would appreciate your answers, because time is of the essence

  HP Pavilion Elite e9290f | Intel Core i7 920 2.67 GHz | Windows 7 Ultimate 64 - bit Edition. 20 GB OF DDR3 SDRAM MEMORY | 1 TB of HDD at 7200 RPM. HARD drive external 2 TB | HARD drive 1 external to | HARD drive 640 GB external | HDD external 500 GB | NVIDIA GeForce GTX 260 1.8 GB | Audio interface Edirol FA-101 | Samsung 2493 HM 24 inches. Wide screen monitor |

  Hello

  I have not tested a HDD 4 TB on the motherboard of truckee. In theory, it should work as a data reader set shaped like a GPT disk.

  Another option if you don't want to take the risk is to install two hard drives of 2 TB. The one in the location empty in the cage from the hard drive and another in the optical drive Bay (if open) second.  You will need one 3.5 "to 5.25" adapter if you use the optical Bay.

  Check on the return policy for the 4 TB harddrive and see if your can return/exchange it if it doesn't work.  Kit retail for Hitachi 4TB has an optional driver if the motherboard of your PC will not format the drive completely outside up to 4 TB.

  

• HP Pavilion s5715: replace the internal hard drive and windows 7 & OEM

  Hello world.

  I use a PC HP Pavilion Desktop s5715 with windows 7 Home premium x 64. The internal hard drive is a Seagate (ST1000528AS SATA/300 7200 RPM). I recently received messages when windows starts by saying that "the hard drive failure, is imminent. Check the disk with CrystalDiskInfo told me he had a problem with the reallocated sectors count & number of events of reallocation (with the values 1, 1, 36).

  So now, I want to replace this with a Western Digital Black 1 TB internal drive, and I want to have Windows 7 onto the new drive. I had 3 HP recovery disks (burned on DVDs). I also had a D drive that says "HP_Recovery.

  1. can I replace the Seagate SATA/300 with a WD SATA/600?

  2. my HP Pavilion s5715 does support the new internal hard drive?

  3. how to install windows 7 on a new hard drive? Can I use the HP recovery discs? Some forum posts on the internet say something OEM Windows 7; I have no idea what it is and if I got it. Or should I use a program like Acronis to clone my hard drive to the new? What should do? Thank you

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the side, back or bottom of the computer. Please, do not include the serial number. Please enter the product/model information in the HP Online Support page for consumers , and/or post it here for our review.

  1. can I replace the Seagate SATA/300 with a WD SATA/600? YES

  2. my HP Pavilion s5715 does support the new internal hard drive? YES

  3. how to install windows 7 on a new hard drive? Can I use the HP recovery discs? YES, you will need to use your HP recovery disks to return the computer to a factory State.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• the internal HARD drive has been corrupted and I fails to make the back upward. need information.

  I've owned an HP Pavilion dm1-LQ862PA #UUF, used to be windows 7-64 bit. the internal hard drive has been corrupted and recommended to replace another. they were asking for the backup cd and I failed to do, and I do not regret it. Well, except to lose all my files and programs that I installed, it will also include bluetooth, wi - fi and other important built in programs? I'm not a computer expert. If ever these important programs had totally disappeared, how retrieve it? my laptop in an HP authorized service center will be probably expensive and I decided to buy a new HARD drive and ask someone to put it in and install a new OS. Please help thanks

  Hello:

  There is a support for your PC page where all the software drivers to run the hardware on your PC such as bluetooth and wireless can be reinstalled.

  http://h10025.www1.HP.com/ewfrf/WC/product?product=5079502 & CC = US & DLC = in & LC = on & query = LQ862PA & Tool=.

  What I don't see is the availability of recovery disks to reinstall the operating system (windows 7 64-bit) or your PC programs (other than those listed in the link of support above).

  This means that if you want to replace the hard drive, you must make your own W7 64-bit installation media and use the 7 product key of Microsoft windows on the bottom of your PC to activate the installation.

  That assumes you can read all 25 characters of the product key windows 7.

  Here's how...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  The replacement hard drive should be a 320 GB SATA II 5 400 rpm Disk If you want the same specification provided with your PC hard drive.

  Please refer to Chapter 4 of the service manual on the link below for the procedures for removal and replacement of the hard disk.

  http://h10032.www1.HP.com/CTG/manual/c02666702.PDF