My iPad is not visible for my iPhone via Bluetooth 6 and won't connect, I tried to reset the network configuration, erase and reset iPad, hard reboot. My Apple Watch is connected to my iPhone. It is visible for my Samsung phone.

Similar Questions

• I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information

  I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information. and that did not help. What to do now? The comment of Bios makes me fear that it could damage my computer forever. What should do? Help, please

  Hi Alan,

  Thanks for posting your query in Microsoft Community.

  I understand that the computer does not restart even after running Startup Repair and I will be happy to answer your query. I appreciate the efforts made to try to make it work. Let me ask you;

  • How do you run the Startup Repair?
  • Do you have Windows 7 repair disc?
  • Remember to no particular change in the computer before the show?
  • Have you plugged an external equipment, except the keyboard and mouse?
  • You are able to start the computer in safe mode?
  • What is the brand and model of the computer?

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  There could be several reasons why he's not leaving including hardware as well. In addition, it could be because the master boot record (MBR) has been damaged. When you try to use the Startup Repair tool to repair the MBR, the Startup Repair tool indicates that no problem was found or it does not work yet.

  If you have any connected USB flash drive or other external devices connected to the computer, if you please, remove them and try to run the Startup Repair tool.

  If you haven't tried using Windows 7 repair disc, you can try the following:

  1. Insert the Windows 7 disc
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on repair your computer
  6. Select the operating system you want to repair.

  You can also perform the system restore by selecting the restore point when you think it worked very well. System Restore, choose advanced options using the disc.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  I also recommend to contact the computer manufacturer to get the done diagnostic equipment.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error Msg: "not enough server memory is available to process this command" tries to open the network when the folder shared

  Hello.  I did some of my files of Windows XP Dell system accessible on my home wireless network.  When I try to open the folder (which appears in the network folder) on my Sony Vaio with Windows Vista, I get the error msg that I have stated above in the title of this Post.

  The entire message starts like:

  \\DOUG-DELL1\Denises at the bottom of the folder is not accessible. You could

  are not allowed to use this network resource.  Contact the

  Administrator of this server to find out if you have the permission to access

  "not enough server storage is available to process this command" tries to open the network when the folder shared.

  I have a bitmap and a Jpeg screenshot captures showing the specific error message as well as the objects on my network - is possible I can join to this post?

  This error message is misleading. See article Knowledge Base Microsoft Antivirus software may Cause Event ID 2011 for a likely solution, specifying a value of IRPStackSize 15 on the Windows XP computer. Boulder computer Maven
  Most Microsoft Valuable Professional

• Bluetooth pairs but won't connect

  My Motorola Droid 2 Global is paired with my MB Pro. But it does not connect. Sometimes it will connect momentarily then abandons the connection. What is going on?

  What you trying to do? I don't know anything about the droid devices, but that the connectivity is not supported for iPhones running iOS.

  Barry

• \\N-PC is not accessible. You might not have permission to use this network resource while trying to access the network computer

  Title: Cannot access computers on my network?

  For some reason any my computer won't let me access any computer on my network.

  When I try to open any computer, including mine, since the tab "network" on the left he gives an error message saying "\\N-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The specified network provider name is invalid.
  I ran the corner store to home group and network troubleshooting & two is out clearly said there are no problem.
  Anyone know how to fix this?

  Hello

  -What are the versions of the operating system installed on the conencted to computers in the network?

  -Did you do changes on the computer before this problem?

  Step 1: I suggest you to choose a network location, and then try to access the computer and check if it helps.

  Choose a network location

  http://Windows.Microsoft.com/en-us/Windows7/choosing-a-network-location

  Step 2: I also suggest you to check the network troubleshooter event logs to solve network problems and to check if it helps.

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Step 3: If the problem persists, I suggest you to follow the steps from the link and check if the problem persists.

  Why can't I connect to other computers?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  For reference:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Step 4: Disable the Antivirus

  I suggest to disable the Antivirus/Firewall temporarily, then check the issue.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

  Note: Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Hope this information helps.

• I'm not sure how to make it work. 2 guests, 2 virtual machines, trying to keep the traffic on the Server Blade.

  I have two blades on the same chassis running ESXi 4.1, each has an Exchange Server on it. Im trying to keep the traffic between the two Exchange boxes contained between the two. I thought that I could put in the same vSwtich, but looks like I need vDS for this. I don't have this license level.

  Now, I found myself with two separate vSwitches with the same label. network, it shows them on the same vSwitch so they don't transmit traffic. because they are separate switches... my vSphere networking missing a bit... need to study more.

  Since you have virtual machines on different blades that the traffic between the two will have to cross a physical network card.   If you need to segment this traffic, you can configure a VLAN in your network, add a new group of port on each host to ESXi virtual machine and then set up a NIC in the virtual machines to use this group of VIRTUAL LAN port.

  Though the virtual machines on the same host (always) you can configure a single vSwitch.   In this case the traffic between virtual machines would not hit the physical network and you wouldn't need even a physical NETWORK adapter, attached to the vSwitch.

  Dave
  VMware communities user moderator

  ESXi Essentials free training / eBook offer

  Now available - VMware ESXi: planning, implementation, and security

  Also available - vSphere Quick Start Guide

• Can we listen to the audio via Bluetooth speaker and Speaker Pro iPad at the same time?

  IVe tried to find answer to this. Hope someone can help. I would like to get more power audio audio stream in my Bluetooth speakers without losing my Pro iPad speaker.

  It's a sound source or the other, not both.

  If your Bluetooth speaker is not powerful enough, buy a more powerful.

  Good luck!

• WiFi stop working when 9.2.1 upgrade... A does restore the network configuration and still does not!

  from one day to the next my phone is suddenly being updated to 9.2.1. Since then my wifi was NOT working period. Have excellent wifi signal and still absolutely nothing. I reset the network settings and nothing works. Never been a problem until this 9.2.1 update

  I have the same problem after updating ios 9.2.1

• SCCP Protocol not available for all cisco phones?

  All our phones are currently using SCCP and using Call Manager.   My company bought a few 8841 s and 7841 s, but I see only the protocols SIP for them on 10.5.1.10000 - 7 of the call manager.  I'll make an assumbtion here that I would need to add a default value for the device with CSPC as Protocol.  After you download a SCCP file for this model.  These phones do not provide a file to download to the SCCP Protocol.   Any help on how to set up a type of phone SCCP for these models?  Or it wouldn't hurt anything to run on the SIP protocol?

  Thank you

  Bill

  Here the SIP phones. No support of CPAC.

  Brandon

• Help to find a value for the Network Configuration DVS of coding

  Good day to all,

  I have a workflow that migrates from the host and the vm to one vCenter to another.  The workflows get a list of all virtual machines, as well as the folder it's in the name of the portgroup he uses. The workflow, and then disconnects the host on the vCenter source, deletes a physical network adapters of the dvs, add the host to the VirtualCenter new and attached the bear who has been removed from the new DVS then loops through the virtual machine to the virtual machine in the right folder and linking the new DVS then migrated the vmkernel ports to the new DVS and this is now where I'm stuck

  To move the other natachasery in the new DVS the VcHostNetworkConfig() wants the uplinkPortKey and I just seem to have all kinds of problems in the future with this value and was hoping someone might be able to point me in the right direction

  Thank you

  Steve

  I found what I was looking for and I wanted to share in case this information will help anyone

  -FetchDVPortKeys-

  criteria for var = new VcDistributedVirtualSwitchPortCriteria();

  Criteria.Scope = host

  Criteria.Inside = true

  criteria.uplinkPort = true

  var upPortKeys = dvSwitch.fetchDVPortKeys (criteria); dvSwitch = VmwareDistributedVirtualSwitch

  for each (var i in upPortKeys) {}

  System.log (i)

  }

• 9.7 iPad Pro reboots, shows Apple Logo

  I just got a new iPad 9.7 "Pro bracket. This is great apart from the fact that once every day or so, it restarts and displays the Apple logo on chance. In general, it restarts pretty quickly. It happens to someone else? I hope it is an iOS bug that will be fixed and not specific to my new iPad.

  I've had mine since 3/31 and he did this twice. Only it does not restart, it shows just the Apple on black background for about 10 seconds, then he is well again.

  Usually after a reboot, I have to use my password to unlock my iPad (cannot use my mark initially). Both times he did it, I had not to enter my password, then it must not have actually restarted.

• Just updated to Firefox 29.01 it does not at all. When I opened it that won't load sites that shows just the busy circle floating around forever. It is unusable.

  28 Firefox worked fine, but when asked a pop up opening firefox update to 29.01 I found there was a lot of security issues for 28 so I've manually updated to the 29.01 by going in "subject, check updates, etc." Once downloaded 29.01 and got told to restart, I restarted firefox. When I opened it, I found that it is unusable. It will not open a single Web site. It does not load my homepage. It has all my before Favorites from the Favorites toolbar, but I can't go to anything. I closed and tried to run cc cleaner as I always do, but I get the message "firefox takes too long to close would you like to force a shutdown", but the forced shutdown does not close it no more. I opened the Task Manager to try to close it from there, but firefox does not appear. I don't know what to do. I am all this typing chrome b/c I can't use the latest version of firefox. I've never had this happen before. I also ran in safe mode and it's the same thing. Please help and please answer in simple terms, because I'm not a computer expert. I took a few screenshots I'll join. In fact, I don't see anywhere to attach a picture so I can not. Also, I don't understand the green "add automatically" button which is located under this box on the support page of mozilla. Also, when I went to help, on the page in the upper corner of firefox just now to check the version it says "firefox is updated by another body." That the devil which means? Never seen it ever. Appreciate any help.

  Well, then I can say happily that I'm typing this on firefox yay! I managed to do work, and here's how it is for everyone who is having this problem (well at least this is the solution that finally worked for me). RESTART your computer. NOT simply stop there. It does not work (not for me at least). I rebooted the computer initially there are a few min b/c my was not analysis Norton and I wanted to analyze the new 'new installation' I had to FF. After the computer has been restarted, my norton worked. So I said Hey, maybe I'll give you my FF update 29.0.1 a last try before you install a new firefox, in the hope that maybe restart the computer would have worked. So I opened it and omg he loaded my homepage. It works! In addition, among other first problems I've come across is impossible to bookmark a site. I found the solution. Just go to the upper menu right (it has 3 horizontal lines) and right-click the little star icon that we're used to that means bookmarks. A small menu will appear. Click on "move to the toolbar", and which should put it on the top right of your browser so that you can bookmark things. Hope the tip of restart helps anyone who was having the same problem I was Firefox being unusable! And if you have the bookmark problem, hope it helps you too. Wow. I am so happy that I can finally use FF now! Also, I kept the setting of "no hardware acceleration off the coast." Do not precisely know what that did, but leaving since that works. Oh, one last thing: I closed FF and ran cc cleaner and had NO problem with her telling me that FF would not close. Then restart the computer that solved this way. Yay!

• can not axsess windows firewall of my control panl, it won't let me open to enable the firewall

  When you try to open it, it says unidentifide problem windows can not open

  Hi Billy,
  Follow these instructions to fix the Windows Firewall:
  Download and install repair Windows: 
  http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click on start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• Error message: "not enough server memory is available to process this command" tries to open the network when the folder shared

  When an XP machine is peer-to-peer by ethernet to a 7 W machine, sometimes the XP machine cannot access the files W 7 and the Xp machine displays the message "not enough memory server is available... "the W7 machine retart solves the problem, but the problem recurrs each week.

  Hi Richard hartwell,.

  Could you tell what antivirus software you have installed on your Windows XP machine?

  The problem occurs because of a software antivirus installed on your Windows XP computer.

  See article Knowledge Base MicrosoftAntivirus software may Cause Event ID 2011 for a likely solution, specifying a value of IRPStackSize 15 on the Windows XP computer.

  As a test, you can consider disabling the security software on your Windows 7 machine as well.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Allow all security software after the trial.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]