Problem with the HP G62 recovery disks

Similar Questions

• Satellite A500 - problems with the creation of recovery disks

  Hello
  I bought a Satellite A500 yesterday and now I'm trying to create the recovery discs before anything else.
  However, towards the end of the 1st DVD I get an error message saying "Faile dto open the next file. e:\Boot\BCD (0201123-F1-00000000 error code)"and then when I click 'OK', the DVD is ejected giving a message"unable to create recovery 1' media. Physical examination, I noticed that the DVD is written almost entirely.

  Any advise on this? In addition, in the interface, it shows a USB option and says to insert a USB media with more than 7 GB of free. That I can use it to create the recovery disk? If Yes, when I reinstall windows 7, this allows as a bootable drive?

  Greately appreciate any help on this matter. If it is defective, I want to return as soon as POSSIBLE.

  Thank you
  Mercier.

  As far as I know, that you can not use external device for recovery, it is therefore very important create recovery DVDs.

  Try to create the recovery disk using only DVD-R media. Use high quality media like TDK or Verbatim.
  Last month, I've created on the Satellite A500-157 recovery discs and everything went well.

• Problems with the installation of recovery - Satellite A300D - BSOD

  Hello

  The laptop in question (TOSHIBA Satellite A300D) recently stopped starting (BSoD).

  So, I tried using the recovery disk, but there is no help. What happens is:
  -After about 10 minutes of waiting, the first language menu load, so I click on "next".
  - Then I again click Next and accept the message that my HARD drive will be erased
  - Then I see a cmd prompt that says "try to remove all the letters of partitions possible...". »
  -There is also a minimized command prompt that says something like "RAID failed to initialize."
  -And then nothing happens.

  Is this a hardware problem? I also tried a full installation (instead of recovery), which, even once, is simply not. None of the errors is - it just freezes.

  Any help appreciated.
  Thank you.

  It is not easy to tell what can be the problem, but if you were not able to install the OS by using two different facilities CDs/DVDs, so there must be a problem with the HARD drive.

  The warranty is still valid?
  I mean you can contact the nearest Toshiba authorized service provider and explain the situation. They can swap the HDD and again test the recovery procedure.
  Can you get somewhere 2,5 SATA HDD for testing?

• "HP pavilion slimline: problem with the disc of"recovery"would be"

  I just got a Seagate 1 TB drive backup and have backed up my entire computer to him.  My concern is that my "D" drive, the separate part of my computer that contains the disc "recovery", is almost completely full - its presentation as a solid red bar on my screen - only left 320Mo of 11.7 GB - would have this effect, the performance of my computer at all?  Why is it so plenty of anyway and what can do about it?  Problems with my email and its indicating that I am "" out of memory "-well, I've got a lot of memory on my C drive, which is not a problem, but the same effect my email D drive?"  I use Windows LIVE mail incidentally, and I had problems in the past with it, been quite some time however.  Woud grateful for the help with this.  He used to ask me to put in CD on backup drive D with - don't know why, but I immediately my Seagate drive, now, just do not know what I have to do at this point.  Thanks for any help.

  I have no idea why the "D" drive is a solid red bar, nor why it is so full.  I've changed nothing since I bought the computer.  How would I know if something is to use the D drive?  I thought that it was 'partitioned' off so that he couldn't be touched?  I have everything on my laptop hard drive Seagate, and I mean everything.  I also have system recovery disks of mirror image right after I bought the computer, but that does not tell me why that drive D is now completely "full", it should not be.

  I don't know if you have "solved" the problem, but I guess that the D drive is of no consequence right now even if its 'full' and probably shouldn't be.  Maybe my problem is WINDOWS LIVE MAIL, and I maybe need to do another post to see if anyone can help with the next.  Thank you.

• Problem with the retailer regarding Vista disk operation

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi, I wonder if you can help me with some advice, it is on the PC I bought my father-in-law 6/8mnths ago. Until recently its been fine but lately its reading high and gel etc... to cut a long story short...  When I bought the PC 'Vista' has been pre-loaded and I never thought to check if a disc of the "Vista" operating system has been provided...

  The stepfather wants to re - install the system, but did not get a disc and never had one, when ive asked the shop on this subject that they say that they only provide a... surely that goes away, he said...

  Any help would be accepted with gratitude about whats the carnal... I had one with my Dell.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems after the installation of recovery disk

  Hello

  I just reinstalled Windows with my restore disk after that I install all my backups were useless because I had installed and not 32-bit 64-bit applications

  Thanks for this report, but before you begin the installation of recovery, you must know exactly what you're doing that.
  Be careful next time and don t install wrong OS version.

  Bye and good luck

• [HELP] Problem with the restoration and recovery in the new host

  Hi, guys!
  
  I have tried for two days, but still can't make it work.
  I took a hot (online) full backup archive as well as the control file logs with the SPFILE and then copy the backup to the new host with the same directory structure and parameters. Finally, I tried to restore and recover the database on the new host, but failed during the restore process.
  
  The original host and the new host have the same subject Oracle installed until the patch level. I couldn't understand the solution to this problem based on my knowledge on Oracle DB.
  
  Could someone help me out here? Any advice would be appreciated!
  
  -----
  RMAN > restore the database up to the wire of the sequence 10 1;
  
  From restoration to November 8, 11
  using channel ORA_DISK_1
  
  channel ORA_DISK_1: from datafile backupset restoration
  channel ORA_DISK_1: specifying datafile (s) to restore from backup set
  restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01. DBF
  restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01. DBF
  restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01. DBF
  restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01. DBF
  restoring datafile 00005 to D:\ORA_DATADATA01. DBF
  restoring datafile 00006 to D:\ORA_DATA\DATA02. DBF
  restoring datafile 00007 to D:\ORA_DATA\INDX01. DBF
  restoring datafile 00008 to D:\ORA_DATA\INDX02. DBF
  channel ORA_DISK_1: backup C:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
  OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_. BK
  P
  
  switch to the previous backup
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 11/08/2011 11:41:33
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of the file 4 found to restore
  RMAN-06023: no backup or copy of datafile 3 found to restore
  RMAN-06023: no backup or copy of datafile 2 found to restore
  RMAN-06023: no backup or copy of datafile 1 found to restore
  -----
  
  Here is some additional information you might want to know about:
  
  -----
  RMAN > list incarnation;
  
  
  List of Incarnations of the database
  DB key Inc key STATE ID DB name DB reset reset time SNA
  ------- ------- -------- ---------------- --- ---------- ----------
  1 1 PRODDB 3774691295 PARENT 1 17 APRIL 07
  2 2 3774691295 PRODDB PARENT 521803 6 OCTOBER 11
  3 3 3774691295 PRODDB PARENT 1595143 20 OCTOBER 11
  4 4 3774691295 PRODDB PARENT 1600974 20 OCTOBER 11
  5 5 3774691295 PRODDB PARENT 1952053 27 OCTOBER 11
  6 6 PRODDB 3774691295 CURRENT 2146951 7 NOVEMBER 11
  
  RMAN > backup recoverable list;
  
  
  List of backup sets
  ===================
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  37 full 822,34 M DISK 00:29:47 7 November 11
  BP key: 37 status: AVAILABLE Tablet: NO Tag: TAG20111107T175037
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
  2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_. BKP
  List of files to backup data value 37
  Name of file LV Type cash SNA cash time
  ---- -- ---- ---------- --------- ----
  2149673 full 1 7 November 11 D:\DBDATA\PRODDB\SYSTEM01. DBF
  2 full 2149673 D:\DBDATA\PRODDB\UNDOTBS01 7 November 11. DBF
  3 full 2149673 D:\DBDATA\PRODDB\SYSAUX01 7 November 11. DBF
  4 integer 2149673 D:\DBDATA\PRODDB\USERS01 7 November 11. DBF
  5 integer 2149673 D:\ORA_DATA\DATA01 7 November 11. DBF
  full 2149673 D:\ORA_DATA\DATA02 6 7 November 11. DBF
  7 full 2149673 D:\ORA_DATA\INDX01 7 November 11. DBF
  8 whole 2149673 D:\ORA_DATA\INDX02 7 November 11. DBF
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  38 full 6.95 M DISK 00:00:03 7 November 11
  BP key: 38 status: AVAILABLE Tablet: NO Tag: TAG20111107T182034
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
  \2011_11_07\O1_MF_S_766606834_7CH8Q439_. BKP
  Control file included: cash SNA: 2151141 cash time: 7 November 11
  SPFILE included: Modification Date: 7 November 11
  
  Time of accomplishment time BS key size Device Type
  ------- ---------- ----------- ------------ ---------------
  18,46 39 M DISK 00:00:05 8 NOVEMBER 11
  BP key: 39 status: AVAILABLE Tablet: NO Tag: TAG20111108T093359
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
  2011_11_08\O1_MF_ANNNN_TAG20111108T093359_7CJY7TG1_. BKP
  
  List of newspapers archived on backup value 39
  The next time that THRD Seq YVERT low low time next YVERT
  ---- ------- ---------- --------- ---------- ---------
  1 1 2146951 7 NOVEMBER 11 2149493 NOVEMBER 7, 11
  1 2 2149493 7 NOVEMBER 11 2149519 NOVEMBER 7, 11
  1 3 2149519 7 NOVEMBER 11 2149565 NOVEMBER 7, 11
  1 4 2149565 7 NOVEMBER 11 2149641 NOVEMBER 7, 11
  1 5 2149641 7 NOVEMBER 11 2172859 NOVEMBER 7, 11
  1 6 2172859 7 NOVEMBER 11 2197851 NOVEMBER 7, 11
  1 7 2197851 7 NOVEMBER 11 2220349 NOVEMBER 8, 11
  1 8 2220349 8 NOVEMBER 11 2222621 NOVEMBER 8, 11
  1 9 2222621 8 NOVEMBER 11 2222729 NOVEMBER 8, 11
  1-10 2222729 8 NOVEMBER 11 2223088 NOVEMBER 8, 11
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  40 full 6.95 M DISK 00:00:00 November 8, 11
  BP key: 40 status: AVAILABLE Tablet: NO Tag: TAG20111108T093411
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
  \2011_11_08\O1_MF_S_766661651_7CJY84LK_. BKP
  Control file included: cash SNA: 2223097 cash time: November 8, 11
  SPFILE included: Modification Date: 8 November 11
  -----
  
  Thanks in advance!
  
  Jay

  In short, the RCS of the controlfile will be generally higher than corresponding SCN of the data in the event of hot backup (online) file; However, the two SNA will be the same in the case of cold (off-line) backup. Am I entitled?

  Yes, it's true. In a backup cold (assuming that the CLOSURE was not a SURRENDER but was NORMAL, TRANSACTIONAL, or IMMEDIATE) all files in the database (data files, redo log and controlfiles files) are 'compatible' - at the same point in time, to the same SCN. In a hot backup, the files are updated. RMAN is not necessarily take all the data files at the same time - for example when you have several data files, RMAN would backup the files in batches of 4 or 8 - data files are therefore controlled at different points in time. Similarly, the controlfile is saved last.

  Hemant K Collette

• The problem with the launch of "recovery."

  I'm sorry for the bad English, use google translator

  Everything in order:
  (1) device: ProBook 6570 b (H5E77EA # AKB)
  (2) records 'Recover' and 'tools' are not changed
  (3) two other disk has been modified after the installation of another operating system
  (4) initially, there was a Win7 Pro
  (5) it is necessary to return to the factory setting
  6) press f11 but nothing happens, start the operating system starts

  How to return a function back?

  You can buy discs of recovery or HP usb recovery media or partners of HP.

  How to order recovery disks

• Problem with the BLOB image recovery

  We are on Coldfusion 9,0,1,274733. I checked on "Enable recovery of binary large object (BLOB)" on the database, but the picture is always cut (3/4 in part gray). On our dev server, it works perfectly, our production server gives just partly gray images. I checked the settings of CF database between dev and production, and they are exactly the same. We rebooted the server, but still the same problem. It's like Coldfusion does not see tuning changes. Does anyone else have this problem?

  We have found the solution. Our production servers are in a clustered environment. You must enable "Enable recovery of the binary large object (BLOB)" at the level of the instance cluster. You will need to make this change on all instances in the cluster. I was only to 'local' level on each server in the cluster (which didn't work).

  In CF Admin:

  Enterprise Manager > Instance Manager > select the instance and select BLOB

• Problem creating on the new laptop recovery disks

  Hi Forum:

  I started the procedure of creation of recovery on a HP Pavilion g6 disk.  The laptop was bought this morning at Costco.

  I used discs DVD + R DL for a package that had been previously used for other creations of recovery disc (on other new computers, of course.).  The first drive put in place and the creation of the first (of three) ran discs then hung to 54% of this disk check is completed.  I left him for two hours, and it has not changed. No doubt had hung up.

  It's frustrating because this is the second time in two days that this product. Yesterday, the system blocked when you create a set of recovery discs after the first disc was created and it was gone in half way through the second disc.

  I know that Costco could also resume this current computer but I don't have the time to do it before the owners go on vacation. My choice is to make a deal AcronisTrue Image backup (done) then return to Costco later when they came back.

  I think it might be the discs that I use and who are at fault, with the exception of the fact that I could do a full game just four days using the discs to a same parcel.

  Everyone has problems with the "program on laptops current HP HP Restore disc creation?

  Thanks again Cheryl.  I think you're right.  I had better call HP and explain what happened.  I won't be able to do for some time that the people who are owners go on vacation tomorrow and need with them for email and Skype.

  Here is a link to confirm what I said, it's on this computer:

  www.chasecop.com/images/IMG_0071.JPG

  All the best,

  Gord

• Problem with the Vista recovery disc

  I downloaded the neosmart Vista recovery disk.  I also downloaded the iso burner to create a bootable disk.  The first time, I used a DVD to make the bootable disc.  I then went to defective laptop (my dads - will not go beyond the page that is displayed when you stop suddenly).  I went into Setup to make searching the disk first to start.  I inserted the disc and everything works well, but only for the first, a short walk.  It tell me that windows loads the files and I see the bar moving across the screen.  Then I get the screen you see green bars that cross as if its about to start.  Next, I get a screen with a great slider and a small box saying error of Setup.exe.  If I do nothing, nothing happens, if I click OK it starts the whole process.  I decided to try everything from scratch and delete my copy of vista from torrent and re downloaded recovery disk.  I then burned on a CD using the standard iso-burner and exactly same problem again.

  I'm going wrong somewhere or is the computer of my father beyond saving?

  I got Dell fixed in my mind, for some reason any!

  Here is the link to the Forums in XP.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  Hi elvirkaric,

  Your question in Windows Server 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

• Question about the use of recovery disks Vista Bus on T500 with XP Pro downgraded

  I searched to see if this has been addressed already and I don't see anything about it. I also looked through the Lenovo support site and could not find any documentation with specific information, that I'm looking. So, if all goes well, the people here will have an idea.

  I have a T500 which was ordered with retired on WinXP Pro. It also came with a set of Vista Business (four discs) recovery disks. I plan to get my machine with Vista business records and down XP Pro, but I had a few questions.

  1. as it currently stands, I guess that the R & R partition that is on the HARD drive at this time restoring a WinXP Pro system if I start and get back with her. Is this correct?

  2. If I boot from the recovery disc Vista Business and use it for the recovery of the system, it creates a new partition 'Factory' R & R which would incorporate a Vista Business install?

  I may be wrong on my assumptions and even after the start of the R & R partition, it is really the recovery disks that I choose to use that would dictate if I found myself with a XP or Vista Bus. System.

  For what it's worth, I created a set of recovery disc R & R for the installation of WinXP Pro in case I need to revert to this version.

  I hope that my question is logical and that someone out there has an answer for me.

  Thanks in advance!

  jskang, welcome to the forum,

  Yes on both counts.

  Removal of all the hard drive recovery disks, create the service partition and then the system installs from the recovery with the flavor of windows partition, so that the discs are.

  It was a good idea to create the XP discs.

• Problem with the disk check.

  32-bit Vista Home Premium:

  About 6 months ago, I ran a Check Disk from my C drive (using Vista error checking tool) and checked the two boxes before starting (fix Auto file system and search for errors / attempt to recover bad sectors).

  He ran through the 1 5 6 controls without finding an error.

  On the 6th and final verification that it is running, it hung (or the 4th of 5 controls it works - do not remember if it is 5 or 6 it works). According to me, he started the final control, but stopped and none did not move. A few hours later he still hadn't moved, so I did a hard stop.

  Fortunately, everything was fine when I rebooted.

  I use the computer since then without problems/errors obvious hard drive, but I'm afraid to run another check of the disk, even though I would right now.

  Suggestions are welcome as to what might have caused the shot, and if I do another check of the disk.

  Yes, it's essentially the same command.  Personally, I never use the other method - I just use the one that I you provided.

  : You are right about the meaning switches - you already know or you're an awfully good guesser.  Since you have expressed interest, here's more information on CHKDSK you might find of interest with other switches and guidelines and some good information on how it works and how to use the results: http://www.vistax64.com/tutorials/67612-check-disk-chkdsk.html.

  If you cannot complete a cHkdsk on your hard drive, then there is a problem with the player that must be resolved before it is any worse.  I would definitely give it another chance and also run the diagnostics that I recommended in a previous post.

  I hope this helps and I hope that the test completes successfully this time.  If this isn't the case, I hope that the diagnostic test identifies the problem and it can be repaired than replaced (even if it's pretty rare - usually if it goes wrong it must be replaced).  If this is the case, I would as soon as possible to ensure that it is not so bad that you can no longer access the drive at all - but then again, there may be nothing wrong and we could be worrying for nothing but a bad block or two which is nothing to worry about in itself.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Failed to perform recovery of factory setting - error 0x8007045D Code / product key error - "ERROR!" We encountered a problem with the request for approval.

  Original title: product key error

  Hi all...

  I have ' tried to download the disc Image of Windows 7 (ISO file), but when I insert my product key, the system cannot check it.
  I use the laptop Sony Vaio VPC EG35EG with preinstalled Windows 7 Home Basic 64 bit inside.
  Now, after that there is error (I cannot yet perform plant pose recovery; always finished with error 0x8007045D Code), I need to install clean my laptop with the USB or DVD Installer key. But then, when I try to download it, my product key (I found it on the sticker at the bottom of the laptop) are not validated by microsoft. It is said:

  "ERROR!" We encountered a problem with the request for approval.

  What should I do now? Y does it can someone help me?
  Thank you.

  Consider the following text:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  also check:

  https://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/