My iphone screen 6 hanging suddenly during use.

Similar Questions

• 2-3 days after the expiry of my warranty of one year, my computer turns off suddenly during use. I rebooted, but it stopped again.

  2-3 days after the expiry of my warranty of one year, my computer turns off suddenly during use.  I rebooted, but it stopped again.

  The model is that the computer runs for 15-30 minutes, then suddenly stops, the system reboots, runs for 2-3 minutes, stops, restarts, spans less than a minute, stops, restarts, stop after a few seconds, etc., and at that time there I give until the next day when I repeat the same cycle all over.    I have Windows Vista Home Premium 32 bit and it is a model of Dell Inspiron 518.  There is no error message but a beep at startup upward.  I ran Windows repair program 'Start' who did a restore without success.  The problem occurs even in Safe Mode.

  Does anyone have a guess as to what is the diagnosis?  Thank you.

  Hello

  Could be hardware or even heat and ventilation the related. Try using a small fan to increase ventilation. When a PC
  Remove ALL power and reinstall the memory, all cards and cables (do just not shake - remove and replace-)
  cables on both ends where possible).

  As it does in Mode safe so you probably need technical support in a real store of the computer - no Peeks/leeks at BestBuy or other large shopping areas. Very difficult to solve if it does not remain under tension.
  It remains under tension if you start from the disc of Vista?

  -----------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on these reboots.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Equium A300D turns off suddenly during use

  I just got an Equium A300D about 3 weeks ago and it suddenly powers off during use.
  What can be caused this?
  However it does not do this often but am still very concerned.

  Sounds like its overheating. My previous laptop has done a similar thing.

  The laptop is used in a dusty environment? There may be a build-up of dust in the radiator.

  When you use the laptop, the vents are covered by other objects?

  Otherwise if it's not an overheating issue, and that you use the original Toshiba AC adapter, bring the laptop to a Service Center for repair.

• Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

  Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Apple has not renewed the contract with Google to access Google servers.

  If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging.  Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

  There is more support for iPhoto from Apple.  You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  It is very likely.  If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

  See this: Bug: iPhoto 9.4 crashing when viewing the scene

• Screen went black during use.  What can be the problem?

  That may be the problem if the screen turns black during use?

  First of all, if you use an iPhone 4 as indicated in your profile, it cannot be updated to iOS 9.3.

  Regarding the screen gone black, try a reset.

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  If again, the screen becomes black, it is very possible that this is a problem with the hardware for a date of the iPhone 4.

• Firefox has started to freeze on the opening and hangs / freezes frequently during use.

  Firefox has begun to open very slowly [very]!, as well as to crashing and freezing during use. What's happening on all my three machines, two running Win 7 and the other win 8.
  I tried refreshing and disabling, but to no avail hardware acceleration.
  Now it seems to freeze on opening and takes a minute or two to become sensitive, or not at all.
  When I look into during a freezing Task Manager, I see the Firefox process use 35 to 50% of memory [I have 8GB, 12GB, and 16GB] and up to 50% of the CPU resources.
  Everything was fine until the last two weeks.
  In addition, last month, I noticed an almost permanent error on the status bar message - ' Sync has encountered an error during synchronization: unknown error. " Synchronize automatically retrying this action. »

  
  

• CS5 hangs upward during the opening and used to play quicktime files

  Ive been wrong this shot for days now and have not understood the problem. When I run CS5 on my iMac i7 Quad Core 2.8 it hangs up during the launch. Sometimes he got through, but it's usually when I stop the QT32 Server process in the monitor of activity... but then he tells me all of my video clips cannot be imported - this 'MooV' file is damaged or not supported. The codecs are just the animation to 1080. I have the version snow leopard 10.6.4 and quicktime 10 and 7 when installed. I tried to remove the AE preferences as well. The only plugins I have installed are trapcode 2.1 and contraction. Most of the time when I open AE by itself, it does very well, but if I open one of my old project files, it hangs up during loading, and once I left the sever process all my video files (codec animation) QT32 are unreadable in AE and say ' may not be imported - this MooV file is damaged or not supported. Any ideas whether what I have to do? Any help would be great! Thank you!

  > import the same clips that are in my other projects

  I'm a bit confused by the present.  Please specify:

  If you start a new project, you can import the clips in the project you are having a problem loading?

  What it sounds like, it is that your project may has been corrupted somehow.  Since you can get opening project closing QT32 server, it probably means one of the references to your source clips is the problem.

  Try these ideas:

  -Start a new project and import the project evil in it.  If it works, you good to go.

  -Offline QuickTime files.  It's simple on Windows-rename the folder (s) they are in.  On Mac, it's more complicated because Mac OS is smarter on the follow-up of the files; the easiest is to copy them and then trash the original (but do not empty the trash).  Once the files offline, open the project.  If the project opens, OK, the message about missing files.  Now create a link to the files until you get a failure.  Once you get a failure, you know that you have either a bad reference in the project. delete it in the project Panel, and then re-import the file.

  -Exit QT32 Server, open the wrong project.  Save as to create a new copy to work.  Now repeat steps on disconnection and reissue of links the above files.

• Qosmio X 300 hangs randomly during video games

  I have a problem with my laptop. It hangs randomly during the search on the internet or video games or movies...
  When he arrives, the screen goes black and the freezing of the sound.
  I brought to the interview, but the components seems fine. I don't know what to do.

  Hello

  You should try to use the Toshiba graphics card driver as its use on the drivers from 3rd-party pages could lead to highest GPU temperature that would cause problems.
  Additional try update BIOS if newer version is available.

• HP m9500z is crushed, able to reboot and restore, now no start HP screen, just hangs

  HP m9500z is crushed, able to reboot and restore, now no start HP screen, just hangs. After disconnecting the power for several hours, I was able to get the system running, ran scans disk for errors, no problem.  a few minutes after vista is that it crashed again.  When you restart the fans launched full speed, no start hp at the start screen, nothing.  I tried to reset the CMOS using the jumper trick, nothing.  removed the battery, nothing.  I even tried the blind stuff, I have seen suggested, as pressing F10 for 8 seconds, etc..  during one of the last times before that it's totally off I ran the diagnostic of the system BIOS, everything was fine.  I think I have a corrupted bios.  Any ideas? Could be a motherboard fried, but I hope that its not so bad.  Product num nh836av-aba.

  From your description, I would unplug the video card and the video shipped by train.  The specifications of your mb should be these: http://support.hp.com/us-en/document/c01635688

  Please make sure you have an esd protection and immerse in your unit without first physically disconnect power to the wall outlet

• 6 Installing iPhone iPhone screen protector 7.

  IPhone screen protection 6 will fit the iphone 7? I know that they are similar in size.

  The 'screens' (the part used to display things) are identical in size.

  The home button will be a little different.

  The thought of non-collage a screen protector to a device and re-application to another doesn't sound very wise.  Screen protectors are not very expensive.  Are you sure you want to do this?

• Border surrounded my iPhone screen

  About a year and a half, I bought an iPhone5s.

  I used it in the past with no problems at all. Until one of my friends saw a very dark border surrounded by my iPhone screen.

  It was very low, so it can not be detected under normal conditions. I see that it is only when the screen color is white or a light color.

  The best way to be able to see who is put in the machine is tilted at an angle of 45 degrees when starting or when you open the application 'Notes '. Please refer to the attached photo from my iPhone. I want to ask about the cause of this phenomenon? Is this the same State with any other new iPhones5s factory or not?

  1 splash screen

  

  2. the note screen

  

  3 normal screen

  

  I noticed the same thing with my iPhone 5 and iPod touch 4th generation. He doesn't seem to really be a problem and it never got worse so I ignored it. I assumed it was just a weird effect of the backlight. I don't know what are the causes or if this is normal. If you think that this is a problem, take it to the Genius Bar for evaluation.

• My iPhone screen 6 is black but the phone still works as the sound goes in and out. I can't restart and have tried several times and cannot reset on iTunes because need to unlock my phone.

  I dropped my phone in a short distance and when I picked it up it the screen was black. However, the sound still works as I changed the switch works for her and he made noises. I also slightly see the apple logo when I turn on my phone and you can see the switch when I try to turn it off, but it is not entirely displayed, I can't see it in very dark rooms. I tried to reset the phone several times using the Lock and Home buttons at the same time and we have tried to connect it to iTunes to reset, but it does not connect due to having unlock my phone, I can not do. Any help would be appreciated.

  Hello CaffNutt,

  Thank you for using communities of Apple Support.

  I see that you get a black on your iPhone screen, even if it is enabled. I would recommend that you take a look at the following article:

  Get help with the screen on your iPhone, iPad or iPod touch

  The first two sections seem more relevant.

  Best regards.

• The Iphone needs to cool down before using the flash

  Hello

  I see the message on my Iphone 5 s(IOS10-Updadte) camera-"The Iphone needs to cool down before using the flash"

  Please help me solve the problem.

  Hi sangani53,

  Thank you for using communities Support from Apple!

  This message indicating that your iPhone must cool before using the flash indicates that the temperature of your iPhone is passed to where certain features will be disabled.  Once you bring the temperature down, the features should come back.  Take a look at this link for more information on updating your iPhone in the operating temperature.

  Keep the iPhone, iPad and iPod touch in acceptable operating temperatures

  Take care.

• IPhone 7 will accept multiple fingerprints using the key ID?

  IPhone 7 will accept multiple fingerprints using the key ID?  If so, how?

  My iPhone 5 allows you to set up several fingerprints via settings > Touch ID & password, I doubt that the iPhone 7 would have fewer features.

  (I asked for your message to be moved to the forum from iPhone to help, do not know why you decided to post on the forum to help iPad.)

• How much would it cost to repair iphone screen 6 in India?

  Hi everyone, in fact my 6 Iphone screen does not work correctly if I want to change the screen so I want to know how much it would cost me if want to replace the screen on the apple store.

  Check the Apple.com website in your country. The United States is support.apple.com that lists the repair costs.

  In the United States, it is $129 plus tax (without AppleCare +) or $29 (with AppleCare +). More than likely the price will vary in your country.

  Here is a link to the India English website: https://support.apple.com/en-in/iphone/repair/service