my lan adapter fried by lightning?

Similar Questions

• Wireless lan adapter

  Uninstalled by mistake wireless lan adapter. What can I do?

  Hello

  You are welcome

  No, you don't need to be connected to the internet.

  Kind regards

  DP - K

• Disabled wireless lan adapter. How can I solve it it?

  The laptop is a HP EliteBook 8440p running Windows 7 Professional Win7Pro.

  The HP Wireless Assistant has the following message: Wireless LAN adapter: this device is disabled in the Device Manager and cannot be activated from Deputy Wirelss.  It can still be disabled.

  I checked the Device Manager do not see where to put them on.

  There is a blue light on the top of the keyboard and on the front of the laptop.

  It is enabled in the bios.

  Trying to resintall the driver.

  The model of the wireless device # installed is:

  Intel model: 622anhmw

  SPS: + 572509-001 OB

  Any advice on how to proceed?  I hope that to avoid a complete resinstall.

  Hello:

  At this point, I have no idea except to say, for some reason, the map is dead, and that your laptop is still under warranty, so I would contact HP Support.

  Look in the wireless device and see if somehow the radio got turned off.

  Paul

• Equium A100-331 - integrated LAN adapter in?

  Hello

  Can someone advice me which Intel LAN adapter is built into this computer? Need driver XP Prof and it seems that Intel can provide the driver on their site. Unfortunately, those on the Toshiba site doesn't seem to work for me.

  Thanks adavance.

  Alguien

  Hello

  Try this one:

  [Driver Lan | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 8 & selFamily = 192 & selSeries = 236 & selProduct = 653 & STAS hortMod = null & language = 13 & selOS = 10 & selType = 22 & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = 22 & page = 1 & ID = 55434 & DISO = 10 & driverLanguage = 42]

• LAN adapter failed media test

  Hello

  I have a Toshiba laptop have problem When I started my computer I saw this suite

  Novell Netware loan v.1.00 firmware (940810) (c) Copyright 1991-1994 Novell inc. All rights reserved Intel Ether Express (TM) Pro 100 LAN adapt.

  LAN adapter failed media test
  Please check the cable, and then restart the system.

  Out the charger RPL

  Operating system not found

  My hard drive is detected by the Bios, but when I tried to install an operating system 'WXP Pro' from a bootable CD, the installation has not started.

  Here I have described how the page looked like if someone can help me!

  Hello Sir

  In my opinion, you should check if you can find something on the producer mobile support page. Check if you can also find the latest LAN driver.

  Do you use a full version of Microsoft for installation or recovery media supplied with your laptop?

• Equium M70 LAN adapter - it tells me to check the cable connections.

  When I connect a cable to the LAN adapter to the back of the laptop, how can the status LEDs should he show.
  I have only one view. Does that mean I have a problem.
  I am trying to connect to my ISP using an ethernet cable. He always says check cable connections.

  Near the port of LAN, there are two LEDs available: orange and green. When the LAN cable is OK and connection is where the Green led is permanent. The orange LED blinks when data transfer is available. Please check it carefully.

  If the Green LED is not on after connecting the cable LAN there are three possibilities:
  The LAN cable is defective
  Your router settings are bad (MAC settings or IP address)
  Or in the worst cases the LAN card on your laptop is defective (check in the Device Manager)

• Satellite L505 - 10J W - Lan Adapter missing

  Hello

  the W-Lan-adapter to my laptop (Satellite L505-10J PSLS3E) suddenly disappeared yesterday during normal use; shortly before the Wi - Fi connection still worked. The adapter is no more displayed in the Device Manager of the first operating system (Windows 7 Professional 64 bit); the second one (Ubuntu 10.4) does not either - it's as if the laptop has simply not provided with an adapter.
  I have no idea what to do - is the broken WiFi adapter or someone knows how to solve the problem?

  Greetings,
  Alfred Schuhmacher

  Hello

  The laptop really support a wireless network card!
  It must be equipped with a Wlan RTL8191SE Realtek 802.11bgn chip.

  You see some unknown devices in device-> network cards Manager?
  If Yes, then this might be a wireless network card!

  In this case, you must download the WLan driver again and should install it.
  Please download the Wlan driver from this page:
  http://APS2.toshiba-tro.de/WLAN/

  If it does not, access to the BIOS, set it to default settings, restart the machine and try again Wlan driver!

• Tecra A7 can't find the LAN adapter

  I recently reinstalled windows professional and can't seem to get the LAN adapter if displayed in windows, I already checked the config in the bios to see if it has been disabled. Any who have similar problems?

  Hello

  properly installed all necessary drivers? If not already done you should do so immediately.

  I guess you have an intel lan card, so it would be useful to install the latest software proset intel, which must be downloaded on the website of intel.

  Have you the LAN card worked properly with the former system installed?

  Welcome them

• I have windows xp service pack 3. Driver 4.150.29.0 version broadcom 802.11 wireless lan adapter must be reinstalled.

  XP service Pack3, broadcom 802.11 wireless lan adapt 4.150.29.0 version needs to be reinstalled. The pilot had a mistake and while t/s one of the final solutions to try it was to uninstall the driver, then restart the computer. The pilot never reinstalled, same when I searched the Web for this with the installation wizard. Broadcom program still shows in the uninstall programs, but when I go into the Device Manager it shows device unknown, no driver installed. There is no option to roll back to a previous driver. I tried to do a system restore, and it doesn't work anymore. When I did a scan of the system with detective driver that he showed that no driver has been installed for her, but I do not have the cash flow when paying for this to have the wifi. I searched online and not able to find the driver I need on the Web site of microsoft or broadcoms. Don't know where to go from here, other that a cable ethernet... any help in getting this reinstalled driver would be greatly appreciated. Thank you!     If more details are needed let me know what you need to know.

  Hello

  I guess that you have a laptop, if your copy of Windows was preinstalled on it there is a big chance that the driver is built into your computer. To check, click Start > double click on C: > double-click the files to program files > (locate) double-click the folder of the cabins. From there, you can install your wireless driver.

  However, if the instructions above does not work, then download the driver from the website of the manufacturer of your computer, they should have ALL the drivers for your computer. :-)

• Cannot start error code 10 messege on my wireless lan adapter

  I tried almost all day with no luck.  The computer is wireless, or at least it used to be. Now in Device Manager, I have the yellow exclamation on my wireless lan adapter.  I tried all the solutions proposed by the troubleshooting without result.  Cannot update the driver.  I get the messege that no updates are available, and cannot back the driver because there is nothing to restore.  Where can I download a wireless adapter lan 802. 11 b/g wn5301a?  All the sites that I find are the costs of unnecessary software prices.

  Hello

  Try a system restore before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ===============================================================

  If necessary:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Use a wired connection or download driver WiFi like below on another computer and transfer
  it to this computer on a removable media such as a CD, DVD or USB card or stick.

  Panel - device - network - WiFi note the check mark and all the info on the model Manager-
  Double-click - writing Drivers version tab - click the driver update (this can do nothing as)
  MS is far behind the certification of drivers) - then right click on the device - UNINSTALL - REBOOT -.
  This will refresh the driver stack.

  Go to system Maker and search for the WiFi Driver updated - download - SAVE - go where you put it.
  Top - right click RUN AS ADMIN - REBOOT

  Then go to the site of the manufacturer of the device and get even more recent (Realtek, Intel, or one that makes the device) and
  try to install again.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• LAN adapter is not available. Pavilion 15 P032ND

  Dear HP,

  I recently bought this laptop and it has been amazing so far. However the ethernet LAN card is showing is only the network WIFI works fine but the LAN adapter is not available. Even in Device Manager is not there. I installed an SSD, so I'm on a new install with no HP Recovery Manager but the LAN has been working well for 2 weeks before he disappeared.

  There are a few features unknown in my device manager that can be. When I install the LAN drivers from the HP site but it says that no adapters were found.

  What would be the best course of action to get this feature. I can't go without the LAN because I use this laptop as my office with the lid closed. And the WIFI does not work when the lid is closed.

  Of course, this is very strange!

  Just for fun, remove the Intel wireless card and see if the ethernet adapter shows.

  If not, I would say that you had a fortuitous failure of integrated network interface, and you should contact HP for technical support under the warranty.

• Error problem USB wireless adapter "Wireless LAN adapt Wireless Network Connection 4:

  Hello

  I can't access the internet via a USB on my desktop PC wireless adapter. In fact, I received the following message:
  Wireless Network Connection 4 Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Double Belkin N + Wireless USB adapt
  Physical address.... : E8-5B-5B-49-DD-CD
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Please help me solve the problem.

  tanks

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you some questions, in order to better understand the issue.

  1. What is the exact model of the Belkin USB adapter?

  2. What is the brand and model of your computer?

  3. When was the last time it was working fine?

  4. Remember to proceed with software or hardware changes recently?

  This problem may occur if there is a conflict with a third-party software or due to an outdated driver, to diagnose this issue further and solve the problem, try the following methods.

  Method 1: Run the network troubleshooter

  I suggest you to run the network troubleshooter utility. It will automatically detect and solve the common problems that can cause problems with the network. To run this utility, you can follow the article below:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Network Wi - Fi problems and

  Follow the Microsoft article on wireless and wired network problems. Click on the link below:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information was useful. Do not respond with answers, because it will help us to find and provide you with a better resolution.

  Thank you

• The setting of file sharing and printer in my LAN adapter is being turned off when I reboot. Why? What could be responsible for this?

  I put the file and printer for Microsoft Networks share on IT in my LAN adapter properties. When I reboot it has itself turned off.

  My PC running Windows 7 64 bit.
  With leader & Printer Sharing, I am able to access the files on another PC 32 bit Windows 7 and the PC can access mine. After a reboot of my PC is possible - file & print sharing has set itself off the power in the properties of the adapter on my PC (the other PC is still OK).

  In Control Panel / advanced sharing settings I also file and the specified printer sharing option - and which remains lit on a restart. But it seems that it is not enough to allow these two PC to see each other.

  When I turn on sharing in the properties of the adapter to the printer & file, the two computers can then see each other (restart is not required).

  On the other PC, file & printer sharing survives through a reboot without reinitialization.

  I removed the two PCs of our homegroup yesterday evening to try to identify where the rub.
  My PC is to use the standard Windows Firewall current t.

  It is an aspect of various strange problems, I was 'enjoying' with Windows 7.  Following suggestions of the other forums, I turned off of packages jiumbo and created a connectionid identical on both systems. The Intel web site confirms that I have the Intel network adapter driver.

  It's very strange. Any suggestion will be highly appreciated.

  I think that I found the cause of the problem.
  It is a Lenovo Thinkpad and it comes with 'Logins', software to help manage network connections.
  Buried deep in the settings is a security option disable file and printer sharing.  I disabled that and will test by restarting later.

• Problem: Screen resolution & Lan adapt.

  Problem 1: Screen Resolution.
  First of all start, Windows 7 Home Premium 64-bit. Second boot, Windows 7 Home Premium 32-bit. Then I didn't work as it used to be. Now using, Windows 7 Ultimate 32-bit. After this install and reinstall, I was confused and didn't know what was my original using bits. : S (supposed to be 32-bit)

  Okay, so I was trying to backup D: drive and tries to start and do a clean install from disk wins7. But unfortunately, I had my iso installed with Windows7 Home Premium 64 - bit. FYI, I didn't know what Wins7 bit iso has been in the cd, so I just started it and installed with this 64-bit cd.

  Then I tried to change my screen resolution. There were two options: 800 x 600 and 1024 x 768. I changed it to 1024 x 768, but it will not work. It's weird. I went to Device Manager and checked on the Image adapter: Standard VGA graphics adapters.
  Problem 2: The Lan adapter.
  Cable connected to the modem, it flashes. but I could not simply go online, and I didn't know why. Is it lack of the new wins7? Or my adapter lan was broken?
  Don't let some answers, thanks in advance.

  Problem 1: Screen Resolution.

  First of all start, Windows 7 Home Premium 64-bit. Second boot, Windows 7 Home Premium 32-bit. Then I didn't work as it used to be. Now using, Windows 7 Ultimate 32-bit. After this install and reinstall, I was confused and didn't know what was my original using bits. : S (supposed to be 32-bit)

  Okay, so I was trying to backup D: drive and tries to start and do a clean install from disk wins7. But unfortunately, I had my iso installed with Windows7 Home Premium 64 - bit. FYI, I didn't know what Wins7 bit iso has been in the cd, so I just started it and installed with this 64-bit cd.

  Then I tried to change my screen resolution. There were two options: 800 x 600 and 1024 x 768. I changed it to 1024 x 768, but it will not work. It's weird. I went to Device Manager and checked on the Image adapter: Standard VGA graphics adapters.

  Problem 2: The Lan adapter.

  Cable connected to the modem, it flashes. but I could not simply go online, and I didn't know why. Is it lack of the new wins7? Or my adapter lan was broken?

  Don't let some answers, thanks in advance.

  Install the drivers.

• No puedo instalar hardware device VIA Networking Technologies Cardbus PCI Wireless LAN Adapter para W7, so alguien tiene driver is lo agradeceria

  No puedo instalar hardware device VIA Networking Technologies Cardbus PCI Wireless LAN Adapter para W7, so alguien tiene driver is lo agradeceria.

  El driver worked well with Windows XP, upgrade to pero al hacer a W7 me da problemas, visit el sitio oficial, pero no tienen el driver para Windows 7.

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace: (sp)

  http://support.Microsoft.com/common/international.aspx