Equium M70 LAN adapter - it tells me to check the cable connections.

Similar Questions

• If my disk defragmentation has been stopped and the computer tells me to check the log events for more details how can I do my accessible Defragmenter again?

  If my disk defragmentation has been stopped and the computer tells me to check the log events for more details how can I do my accessible Defragmenter again?

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Type these commands in the start menu, run a dialog box:
  Here's how:
  a. Click Start.
  b. in the run box, type the following commands one by one and press to enter.

  regsvr32 dfrgsnap.dll
  regsvr32 dfrgui.dll
  
  Method 2.
  I. to resolve this problem, follow these steps:
  a. Click Start, run, type % Windir%\Inf, and then click OK.
  b. right-click the dfrg.inf file and then click on install.
  OR
  II. Alternatively, you can reinstall Disk Defragmenter using the following command:
  a. Click Start, run and type that the following command and press ENTER.
  Rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\dfrg.inf

  I hope this helps.

• The sound of Apple received email saying and tells me to check the password within 48 hours.  Scam?

  rreceived 'Apple' email, telling me to check the password within 48 hours.    Is it a scam?

  Yes, it's almost certainly a scam.

  The only time where Apple will send you a letter about your password is if you click on the "Forgot password" link on one of their sites, and even in this case the email will tell you how change or reset, has not check.

• LAN adapter failed media test

  Hello

  I have a Toshiba laptop have problem When I started my computer I saw this suite

  Novell Netware loan v.1.00 firmware (940810) (c) Copyright 1991-1994 Novell inc. All rights reserved Intel Ether Express (TM) Pro 100 LAN adapt.

  LAN adapter failed media test
  Please check the cable, and then restart the system.

  Out the charger RPL

  Operating system not found

  My hard drive is detected by the Bios, but when I tried to install an operating system 'WXP Pro' from a bootable CD, the installation has not started.

  Here I have described how the page looked like if someone can help me!

  Hello Sir

  In my opinion, you should check if you can find something on the producer mobile support page. Check if you can also find the latest LAN driver.

  Do you use a full version of Microsoft for installation or recovery media supplied with your laptop?

• Disabled wireless lan adapter. How can I solve it it?

  The laptop is a HP EliteBook 8440p running Windows 7 Professional Win7Pro.

  The HP Wireless Assistant has the following message: Wireless LAN adapter: this device is disabled in the Device Manager and cannot be activated from Deputy Wirelss.  It can still be disabled.

  I checked the Device Manager do not see where to put them on.

  There is a blue light on the top of the keyboard and on the front of the laptop.

  It is enabled in the bios.

  Trying to resintall the driver.

  The model of the wireless device # installed is:

  Intel model: 622anhmw

  SPS: + 572509-001 OB

  Any advice on how to proceed?  I hope that to avoid a complete resinstall.

  Hello:

  At this point, I have no idea except to say, for some reason, the map is dead, and that your laptop is still under warranty, so I would contact HP Support.

  Look in the wireless device and see if somehow the radio got turned off.

  Paul

• Equium M70-PSM77E connection problem: Garmin GPSMAP 60CS

  I use Memory Map and I have a Garmin GPSMAP 60CS, for some reason some in recent weeks, I can't transfer routes and trademarks etc. from the laptop to the GPS.

  A message pops up saying unknown Garmin.
  I tried put in place and that you have downloaded the drivers Garmin, but when you try to Set up once again, none of the COM ports appear to be active.

  Research in Device Manager, no ports are indicated and are not shown on the list of Control Panel.

  My laptop is an Equium M70-PSM77E.
  How can I get all the ports listed. I connect the Garmin via USB.

  Hello

  You have connected this 3rd party device ports USB hmmm I noticed a similar problem with my external USB HDD. For some reason the external HARD drive has stopped working.
  It happened because I haven't used the function remove.

  I spent a lot of time to get this drive working. After a long investigation, I removed the USB ports on the Device Manager, cleaned the registry by using the cleaning such as CCleaner or Registry cleaner software and restarted the operating system.

  After this procedure, the operating system acknowledged again the ports, and I was able to use the HARD drive.
  So maybe this trick helps you

• Windows Home Server 2011 complete system restore problem = cannot start the LAN adapter

  Home built PC

  Card mother Gigabyte GA-Z77MX-D3H

  Network adapter Atheros AR8151 PCI-E on the map connected to the LAN Cat6

  Windows Pro 10

  Windows Home Server 2011 on LAN

  I had a hard drive failure partial who gave no symptoms or errors except a VERY slow start-up and operation.  I tried to do a restore of the entire system of my Home Server 2011 backups to see if, perhaps, just the image was corrupt.  USB was created and all drivers copied from pilots for the full system restore folder.  Has started the full restoration of the system and loaded the missing NETWORK adapter driver by using the scanner for drivers.  Driver support was successful but no lights NIC and the message "cannot find server".  NETWORK card was working fine before, even with the bad hard drive and also after the abandonment of the restoration.  Installed the new drive hard C:-System and that was the main problem, BUT..., the later to restore attempt was always the NIC starts not problem.  Tried the driver directly at Gigabyte support and drivers drivers for the full restoration of the system of records from several different backups.  No love.  Just NIC does not start after the specified load successful pilot.

  All good advice?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Equium A100-331 - integrated LAN adapter in?

  Hello

  Can someone advice me which Intel LAN adapter is built into this computer? Need driver XP Prof and it seems that Intel can provide the driver on their site. Unfortunately, those on the Toshiba site doesn't seem to work for me.

  Thanks adavance.

  Alguien

  Hello

  Try this one:

  [Driver Lan | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 8 & selFamily = 192 & selSeries = 236 & selProduct = 653 & STAS hortMod = null & language = 13 & selOS = 10 & selType = 22 & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = 22 & page = 1 & ID = 55434 & DISO = 10 & driverLanguage = 42]

• Problems with wireless on Equium M70

  Hi, I bought an Equium M70 2 weeks for use at home and I bought a Belkin wireless router to use with my broadband (blueyonder). When I arrived it is at home, I realized that the router wanted to connect my modem to my PC, but my PC is not a network adapter (modem is connected by USB). So I went on the Blueyonder site, and they said that I could connect using my cable box and their router. So, I bought the router to use with the set - top box. When I had last week, I plugged it up to the set - top box and the laptop found and connected with excellent signal strength. But when I went to use internet, it opens the pages. I set up the router manually but I always had the same problem, he picks up the wireless, but won't let me use internet.

  Then yesterday, for some reason any he said "wireless turned off, please switch on ', even if I had not turned off. So I tried to put off and then on again, but no joy, I ended up having to do a system restore so that it can work. Now, I was looking on here to see if anyone else had the same problems, saw someone mention by pressing Fn + F8 to go wireless and bluetooth, so I pressed this thought, it can open something, and he says to me now I have to new switch wireless off (I tried pressing once again, but nothing happens also putting the switch wireless does not work)

  If anyone knows
  a how to turn my wireless without doing a system restore.
  b why I get a wireless connection, but cannot use the internet.

  Any help would be much appreciated

  Hello Matt

  I use the Belkin F5D7230-4 wireless router and everything works perfectly. Which one you have?

  If you have the same or similar router, you can use a LAN and WLAN connection. You will find LAN port on the back of your laptop. If your router is configured correctly you should just use LAN cable, connect the unit to the router and start Internet explorer. As I have already said it will work only if the router is configured properly.

  I use the PPPoE connection. On this path that the IP address will be given by the ISP and it must be defined on your laptop to automatically.

  (a) start the WLAN with antenna WLAN switch
  -check if the wireless card is enabled in device or tool ConfigFree Manager

  (b) in my opinion you should check the settings of the router. If you want you can try to use the new Intel's WLAN driver. You can find it on http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Good bye

• Used A100 Equium M70 on recovery CD - now no sound

  Hello

  I had to use my copy of dads of the toshiba startup disk to restore my Equium m70 psm77 because I lost my. sound was for an equium A100-147 and works perfectly except that it does not recognize my sound card and tells me that I must install microsot bus before it will work

  Don't know enough to fix and im missing my mates as we ve just moved here and I do not hear them so we cannot discuss

  Anyone got any ideas?

  Jordan

  PS its software multi media says is absent but pctures video and downloads and all other functons are fine...

  Don t use the series or different model Toshiba laptop recovery CD!
  The system will not properly work because drivers and tools that are preinstalled on the recovery for A100 CD are designed only for the model A100 laptop and not for M70 or other series!

  If you lost the recovery CD, you can either order a new one or you can use a new original CD of Microsoft Windows OS. You can then use the drivers from the Toshiba page.

• Question about Vista install on Equium M70

  Hello
  I think of buying a full version of vista home or premium edition. Y at - it a special procedure to install vista on my equium M70-337?

  Upgrade Advisor Microsoft vista tells me that the original version would be right for this machine, I was wondering if any problem could happen if I install the premium on this computer instead?

  What could be better? to do a clean install, or just upgrade the existing XP?

  Thanks for your help!
  Károly

  Hello

  > Is there any procedure to install vista on my Satellite M70-337

  I found on the page of the Toshiba driver a new update of the BIOS designed for Vista. So, it seems that you must update the BIOS before you start the Windows Vista installation.

  > Microsoft vista upgrade advisor tells me that the original version would be right for this machine, I was wondering if any problem could happen if I install the premium on this computer instead?

  No, I think you can also use the Home Premium version. There is no major difference between the Home and Home Premium version. The version of Vista Premium provides more OS features. But the performance should be the same.

  > Which is better? To do a clean install, or just upgrade the existing XP?

  I recommend you to install Vista on the second partition. In this case, you would be able to use the two BONES. Vista use a Startup Manager and you could choose between XP and Vista.

  PS: There is no Vista divers for this laptop at the moment. That's why most of the features of laptop as media, FN keys, buttons etc does not work with Vista

• Wireless lan adapter

  Uninstalled by mistake wireless lan adapter. What can I do?

  Hello

  You are welcome

  No, you don't need to be connected to the internet.

  Kind regards

  DP - K

• Equium M70: display driver problem

  Salvation is

  I got Equium m70 series.
  I downloaded the intel graphics drivers from the toshiba site but it quit working and displaying this error after half an hour.
  Error: "the ialmrnt5 display driver has stopped working normally. Save your work and restart the system to restore the full display functionality.
  The next time you restart the computer, a dialog box will appear giving you the ability to upload data about this failure to Microsoft. »

  Then I download the drivers from the website of intel which is the most recent, but the problem is worst windows crashed after 10 minutes that drivers and the blue screen comes and system rebooted and then no display at all on my laptop.
  Then I remove the battery and try on pc after 10 minutes, and then the display come then I go to safe mode and uninstall the drivers.

  Now the window working without a driver.

  Please help me with this.

  Maybe you used a bad driver?  :| Why you n t use the driver graphic European Toshiba page!

  Please note that other graphics drivers (not Toshiba page) can be used and installed only at your own risk and there is no guarantee that these drivers work correctly!

  Looks like you've ruined the whole OS. Perhaps the installation of the graphics driver for the Toshiba page will help you. If this isn't the case,->, try to reinstall the entire operating system since the Toshiba Recovery CD!
  The drivers on the CD are tested and should work properly!

• Equium M70-PSM77: multimedia keys not working not

  How can I get my media keys to start working. When I press on each of the six buttons on the right side of the laptop under the power button, they are not a thing. What could be wrong.

  I have the series Equium M70-PSM77. Please help find me a solution to my problem.

  Hello

  What could be wrong? Which means buddy whether keys are not configured correctly or the Toshiba own software controls does not work!

  Visit the page of European driver of Toshiba and reinstall the controls and driver controls.

  Usually, this should help!

• Equium M70: I can not configure the keyboard

  My computer is an equium M70 is the keyboard layout: English Kingdon, because I bought the laptop in England last year... but I moved from my country - brasil and I can't configure the keyboard to use the Brazilian Portuguese accents, I tried so many different layouts page, but no one worked... so, how can I get additional support for sorting? I've already sent an email to toshiba brasil and toshiba England asking for help, it is very important...

  Thank you very much

  Hello

  You can change the keyboard language settings in the Control Panel regional and language settings language Details tab

  In the installed services, you can add the Brazil or / and keyboard Portuguese language.
  Please note: you can set several languages. To switch between the settings please use the keys ALT + SHIFT.