My LAN isdeactivated connection. How can I get connection?
Extern computer mein vor some Wochen wurde (durch einen Unilab-Mitarbeiter) verstellt so, dass ich keinen LAN-Zugang mehr habe.
Diagnoseanzeige: Lan sei nicht aktiviert. Wie kann ich die LAN-verbidung aktivieren wieder?
Hello
Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the language above, support for additional international sites options are by following the link below: http://support.microsoft.com/common/international.aspx
Tags: Windows
Similar Questions
-
How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?
It allows only wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password, of which none seem to allow me to select a LAN (ISP) simple (without a password).
I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; only the mail tool can't seem to see or use.
Whenever I tell the Windows Mail email 'Send and receive', he wants to 'connect' for remote access or one of his three choices (listed above and direct exclusion of any connection to the local network). It works with remote access, so once I have spend that I should be Ok. but I can't make it work directly.
Help.
In Windows Mail, go to select Tools, accounts, your account email, properties, connection. It shows for the connection? Youshould leave this setting not selected, in which case Windows Mail will use the IE connection uses.In addition, under Tools, Options, connection, the first checkbox must be checked, and the second box unchecked.If everything which withdraws, but you still have the problem, the account may be damaged. Remove account, restart Windows Mail,.then recreate the account.Gary van, Microsoft MVP (Mail)------------------------------------------------------"W6NCT" wrote in the new message: * e-mail address is removed from the privacy... *How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?They don't allow that wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password.which none seems to allow me to select a LAN (ISP) simple (without a password).I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; is not only the messaging toolto see or use.Whenever I tell the Windows Mail email 'Send and receive', he wants to "connect" to remote access or one of his three choices (listedabove and to the exclusion of any direct connection to the local network). It works with remote access, so once I have spend that I should be Ok. but I justcannot operate directly.Help.Gary van, Microsoft MVP (Mail)
-
LAN and WLAN connections
My old wired desktop xp died, it was the first computer on my home network. My friend just got a new office and gave me an old. I have a laptop which has windows 7 and is connected wireless. It is still plugged in and works fine. How can I get my new/old office to connect to the internet? I ran to the implementation of new Internet and network connection wizards, nothing happens. When I go to internet connections, it shows that it is connected, but I can't seem to connect. Help, please!Hi ShannonStrong,
· What exactly happens when you try to connect to the network?
· You receive an error message or error code?
You can follow the steps in the Microsoft Knowledge Base article mentioned below and check.
How to troubleshoot possible causes of Internet connection problems in Windows XP
http://support.Microsoft.com/kb/314095
You can also see this article:
Networking of computers running different versions of Windows
Note: The article also applies to Windows XP
Let us know if this information useful.
-
I have a HP Pavilion a6683w comes with Vista. I bought windows 7 and put it on the PC, and all is well. When I tried to connect to the internet, I found no option connstion 'Wireless', 'simply dial up or high flow. How can I get this option so I can get wireless internet. I use a Lynksis WMP54G wireless adapter. Can someone help me? Thank you in advance... Bob
The WMP54G is an internal PCI wireless adapter and will require drivers installed in order to work a being available as a network connection, the drivers are found here , but depend on the version of the actual hardware to get the right one. You may have to open your case and check the version number on the circuit to find its version, if you still have the packaging, it could be there.
Download the Zip file, unzip it on the PC and launch the setup.exe located in the directory it creates.
Use the utility that it also installs to connect to your wireless network, you will need wireless security key to do so. WiFi LAN in Internet Explorer is so once that the connection is set up IE will automatically connect to your wireless router.
-
How can I get rid of a 'server' missing for a long time on my LAN?
At the same time I ran two iMacs for years, then sold one and replaced it with a Mac Pro, which I put the iMac remaining network. Then, I sold the second iMac, leaving only the Mac Pro. Now the Mac Pro trying to start to connect, like a faithful dog, with the missing iMac. The ' problem connecting to e.g., iMac.local "appears at three or four times in the first 15 minutes after the start. How can I get rid of him? So far I've tried: Finder/go/connect to Server / (unsubscribe); Finder/Prefs/General / (uncheck attached servers). /(Uncheck all) Finder/Prefs/Panel side Shared. There is no evidence of the iMac in my articles or connection options. I had rather not potchke around the code, but nothing has stopped so far. Any ideas? The Mac Pro runs El Capitan 10.11.6.
It can be a little painful to figure out what piece of history triggered attempts to mount. Try to use Console.app to inspect the system log at the time the dialog box is displayed to see if it gives you a clue as to what process makes the attempt.
Otherwise, delete all items in connection (unchecking them is not enough, remove them from the list) you have and see if the problem goes away. If so, divide and conquer to understand that it was responsible.
C.
-
How can I get LAN MAC number? (Physical address of the Ethernet card)
MY SATELLITE L10-102 LAPTOP WAS STOLEN FROM MY CAR IN 21.05.2006.
I FORGOT TO KEEP THAT IT IS NUMBER OF MAC LAN.
IT IS SERIAL NUMBER: 85023542W
HOW CAN I GET HER NUMBER MAC LAN?Post edited by: tgolelcin
Hello
Unfortunately, I have bad news for you.
It is not possible to get the LAN MAC address if you do not have the laptop.
As much as I know Toshiba service partner to identify the laptop and can give you information on the hardware configuration but not on the MAC address.
You can inform the Toshiba laptop has been stolen, but there is nothing to do with the MAC address. -
How can I get rid of connect it using the password option when starting my PC?
There are options that are very useful for that wish. See this: http://www.7tutorials.com/log-automatically-windows-7-without-typing-your-password
-
I stopped to receive mail after December 31. It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?
MacBook Air, OS X El Capitan
First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.
From the Mail menu bar, you select
▹ Connection Doctor window
In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.
Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.
-
How can I get my Apple TV to use ethernet when it is also connected to WiFi?
I have my Apple TV 4 connected by WiFi and ethernet. I want to assure you that it uses the ethernet connection, it will be faster, but when I go to the network settings on the TV, I see only the symbol of WiFi and my WiFi network name. If my Apple TV do not use ethernet, I might as well unplug the ethernet cable. How can I get my Apple TV to use ethernet when it is also connected to WiFi? To automatically use the ethernet connection? Is there a way to disable the WiFi connection?
To use the ethernet connection, connect it. To use the WiFi, you can access the network. I bet the two being connected, it will choose the Wi - Fi just out of logic.
If you want to use ethernet, disconnect the WiFi.
-
When I connect to the net with my broadband prepaid, (error tk_scandr) keeps popping up. How can I get rid of him.
Hi StevoD1,
(1) if it works well before?
(2) remember to make changes?
(3) what version of Windows you are running on the computer?
(4) what is the complete error message you receive?
Put the computer to boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
You might want to know
What version of the operating system Windows am I running?
http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running -
How can I get network connection when booting from the usb key or dvd
Computer: HP Pavilion P6-2450eo
Secure boot disabled
Legacy Boot enabled
Thruogh F9 I can boot into uefi since a key USB and DVD mode, but I can't seem to program loadet network connection. I tried with 13.04 Ubuntu, Linux Mint 15 and Boot Repair - all with the same result.
How can I get the programs get started with network connection?
On thanks in advance!
poul1304
Please check that the programs (Ubuntu, Mint, Boot-Repair, etc.) that you attempt to use it, press the controller Atheros AR8161L gigabit ethernet in native mode. Not all operating systems and software are supported each otut device or the network configuration of the box. Several times, drivers must be loaded or injected into the operating system for a device working properly.
Please send Bravo
-
How can I get my HP Color Lasejet 8550N to connect to the home network in Windows 7 Pro?
How can I get my HP Color Lasejet 8550N to connect to the home network in Windows 7 Pro?
Hello
Based on this and that is not a printer ready network. Has a network card?
Another thing, you need to consider: HP does NOT support Windows 7 (for her) so you have to get this first.Good luck.
-
How can I get my computer to automatically connect to the internet whenever I turn it on?
Connect computer to internet automatically switch on
How can I get my computer to automatically connect to the internet? Currently, I have to press Fn F1 to activate the WLAN - not something huge, but a tad boring. Another computer on the same network will connect automatically in setting in motion.It is a 'feature' of the particular computer you are using. Take a look at the manual; It may be a setting in the BIOS to turn on the wireless on startup.
-
original title: Hello, how can I get my icon of network connectivity added to the notification (to the left of the date) area? Thank you, NT
The icon disappeared after stopping at the wall accidentally. When I right click on the taskbar, go into the properties box and notification, network system icon is grayed out.
Thanks for your help.
Hi NT,
You can read the following article and check if it helps.
You can also consult the following articles and check.
Show all icons in the notification area (system tray)
Remove icons from the notification area (system tray)
Hope this information is useful.
-
whenever I try to connect to the internet (mozilla firfox) it says I have to buy vista security 2011 to clean my laptop. How can I get rid of this to connect online
Hello
these rogue program names belong to a type of malware using different names but producing the same results
Read and follow the EXACT at the below link removal instructions
Read this information
Vista anti-virus 2011, Vista Total Security 2011, Win 7 Home Security and include some of the names by a rogue new name change randomly to settle on the victim's computer. When this particular rogue is installed, it will install as a variety of names in different programs, with each having their own graphical user interface according to the version of Windows running on the computer. Whatever the name, however, they are all the same exact program with just a different name and skin on this subject. This rogue goes by many names in different programs, of which I have listed below depending on the version of Windows that is installed on:
Windows XP rogue namesNames of Windows Vista RogueWindows 7 fake namesXP Antivirus Vista anti-virus Win 7 antivirus XP Antivirus 2011 Vista anti-virus 2011 Win 7 anti-virus 2011 XP Anti-Spyware Vista Anti-Spyware Win 7 AntiSpyware XP Antispyware 2011 Vista Antispyware 2011 Win 7 antispyware 2011 XP Home Security Vista Home Security Win 7 Home Security XP Security 2011 Home Vista Security 2011 Home Win 7 Security 2011 Home XP Total Security Vista Total Security Win 7 Security Total XP Security 2011 Total Vista Total Security 2011 Win 7 Security 2011 Total XP security Vista security Win 7 Security XP security 2011 Vista Security 2011 Win 7 Security 2011 XP Internet Security Vista Internet Security Win 7 Internet Security XP Internet Security 2011 Vista Internet Security 2011 Win 7 Internet Security 2011 Follow the EXACT below removal instructions
http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011
-
How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?
How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?
Hello
It should connect as much as the other computers with their car are on the account users are properly configured, security passwords are defined and firewall do not block.
If the system is only yours and there is no need of local network security, enable the guest account on all computers, give them all the permissions and there will be less to worry about connection mapped, but local drive without security.
PS Ce preceding is based on cable connections. If the connections are wireless, it's another story.
Due to the maturity of the wireless adapter and their support through the OS, automatic connection could not occur.
Wireless is great, but most of us try to sneak out of it the uses it was not designed for.
-------------------------------
My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.
Maybe you are looking for
-
Updated Firefox, now off lightning. Need of Lightening back as important events are trusted to it. Thunderbird now at the 38.0.1
-
Organization address books no longer appear on the left when writing
A long time user of Thunderbird times. The accounts of form 4 books address no longer appear when writing email.It is mainly for this feature I use Thunderbird.How to get back to the old iteration that has worked?
-
Satellite P870 touchpad is huge, nothing to reduce the area active?
Hello I have P870. The touchpad is huge and is eccentric.When I hit my thumb naturally touches the touchpad intermittently.When this happens, you click the pointer of the mouse in a different paragraph (or the same window) and everything what I'm typ
-
Preview App make blank photos resize
I posted this question to the/thread/7411494, it's actually very different, so I'll try again here. First of all, (20 inch, early 2008), iMac OS X 10.11.2 (15 c 50) Get an overview of Version 8.1 (877.7) 1. open a jpg file that I downloaded from my c
-
HP CQ2700ED: Hardware Specifications
Everything that they information on this PC is lost (including the Windows 7 operating system). I would like to use this PC again, but that installing a new operating system and drivers. (The recovery partition is also gone...) Where can I download t