my laptop does not work correctly

Similar Questions

• my mouse on my laptop does not work correctly...

  the "clicker" on the laptop to put it technically, but not the touchpad. You must hold it down for a while and press really hard to make it work, I don't know if it's something that I can fix it or to replace. any suggestions to fix this would be appreciated!

  the "clicker" on the laptop to put it technically, but not the touchpad. You must hold it down for a while and press really hard to make it work, I don't know if it's something that I can fix it or to replace. any suggestions to fix this would be appreciated!

  Hello

  It looks like a hardware problem if the button does not work correctly. Until you can find a solution, you can use an external USB mouse.

  I recommend you contact the manufacturer of the computer for that matter.

  Concerning

• Webcam USB 2.0 on my laptop with windows vista error device does not work correctly

  Original title:

  I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.

  I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.

  Hi Matthew,

  The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.

  Now, check out these links and return to the State of the question.

  When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.

  Here are a few common problems with drivers and the means to solve them.

  See the following link for more information:

  Tips for solving common driver problems

  Also check out the following link and run the fixit available.

  Hardware devices do not work or are not detected in Windows

  The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

• "cooling fan does not work correctly.

  Product name: HP Pavilion dv6 Notebook PC

  Product number: LZ801PA #ACJ

  Operating system: Windows 7 64-bit

  Erroe message:

  "The system has detected a cooling fan does not work correctly. . Continued operation is not recommended and can result in unpredictable behavior that may cause stop randomly, loss of data or damage the system as possible. The system will stop in 15 seconds. To prevent stop and continue the operation please press enter now. »

  OK, now, I cleaned compressed air fan can now issue is completely resolved and my laptop is like as it should. I ask to do something else?
  I mean I don't want my internal parts of the laptop to be defective.

  http://compareindia.in.com/specification/laptops/HP-Pavilion-dv66115tx-lz801pa/238232

  Try a hard reset as follows:

  (1) remove the battery and unplug the DC power adapter.
  (2) press and hold the power button for more than 15 seconds.
  (3) plug the DC power adapter (leave the battery for now)
  4) press the power button
  
  Please post here your positives or negatives in your thread.

  Best regards
  ERICO

• my keyboard on my laptop does not work.

  whenever I press a button on my keyboard, it does not. having to use the on-screen keyboard.

  any notice are muchly appriciated.

  I tried these steps, and yes it does not say "this device does not work correctly". " but this isn't a plug in keyboard, its my laptop.

  Thanks for these tips if.

  Ok. Go to 'Device Manager' look for 'keyboard' you say ' Standard PS/2 keyboard?

  Go to the properties of the keyboard again and check the "resources".

  You have the correct resource settings?

  Are there any 'conflicts' with other devices?

  Do a scan for the hardware changes perhaps?

  It is possible that you may be able to figure out what to do next for better after looking at these.

• My DVD player does not work and all the information I can find is "this device does not work correctly.

  Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

  I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

  I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• my graphics driver laptop does not work on the 8.1 window when I go from window to window 8.1 8

  When I update the 8 to 8.1 window window my graphics driver laptop does not work.

  I am not able to see vedio and not able to change the brightness of the screen...

  I download and install the graphics driver for window 8.1 from your Web site, but it also does not work...

  When I start the laptop, the error message is showed that no amd graphics driver not located or does not properly.

  my laptop model No. is n003tx in this model 1 GB amd radeon 8670M graphics driver is attached...

  Please help me as soon as possible.

  Hi Kushal

  Sorry to hear, by me, these two things do not seem to be connected. However, we can do many things...

  ----------

  1. If you can, restore the system to the date before the problems. It should solve the problems.

  ----------

  2 uninstalling drivers AMD and Cattalyst driver. Restart the computer and update of HP SAssistent, it is a friend more important your computer.

  ----------

  3. If you had already done so, download and run your computer support page chipset drivers - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=5422962#N222

  You need drivers chipset right because it allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  -----------

  4 Please, thry hard reset - procedure

  http://support.HP.com/us-en/document/c01684768

  and that win refresh

  http://support.HP.com/us-en/document/c03538721

  ------------------

  I don't know that he should fix the DIF. Please, let me know, by my side, I wish you good luck and good luck!

• My MOMENTUM PS/2 port touchpad touchpad does not work correctly.

  I'm using acer aspire laptop v3. My MOMENTUM PS/2 port touchpad touchpad does not work correctly. It stops working sometimes and automatically return to the action after a while. When he stops working, pointer can be moved but just click, left click, scroll etc. do not work... Help, please...

  Hi Anoop,

  This problem may occur because of incompatible or corrupted touchpad drivers. I suggest you to uninstall and reinstall the drivers and see if it helps.

  To uninstall the device drivers, follow these steps:

  a. drag the mouse down to the left and right click on the Start icon.

  b. Select Device Manager.

  c. right-click on the device driver, and then click Uninstall.

  Check out the link to install the drivers:

  http://www.Acer.co.in/AC/en/in/content/drivers

  It will be useful. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• My phone does not work correctly

  My phone Bluetooth, Wi - Fi and GPS connection does not work correctly. Bluetooth and wifi have the low range of connection and can barely connect what either. GPS won't work at all, so I can't use it for direction more.

  Take it to an Apple store for diagnosis.

• I have an Apple computer, use the browsers Firefox and Safari, use Comcast for my email. Lately, when the Firefox, my email does not work correctly. Why?

  I have an Apple computer, use the browsers Safari and Firefox. I use Apple mail and Comcast to my email. Lately, in the case of Firefox, my email does not work correctly. I get a message "your server license has expired. While usually, I can access my emails, I can't delete the unwanted emails. This problem will not occur when I use Safari and Apple mail. Is this a problem of Firefox or Comcast? Do you know what license is expired?

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Satellite A300-1EH - windows installer does not work correctly

  Hello, this is my first post on this forum!

  My windows installer does not work correctly.
  What should do?

  Soryy, but I did not now much on computer systems.
  I have reinstall this installer?

  I'm waiting for your answers.

  > My windows installer does not work correctly.
  What do you mean exactly? You see a mistake? What exactly happens?
  Maybe your CD is scratched or damaged.

• Config Free - Connectivity Doctor does not work correctly

  Hi all

  yesterday, I've updated the driver for my WIFI, with the driver found on the Toshiba support page. After installation, the Config Free utility does not work correctly. Indeed, the diagnosis of the doctor of connectivity us window briefly, just to replace it with the classic error message: cfmain.exe has encountered a problem and needs to close...

  The details are
  AppName: cfmain.exe AppVer: 5.0.0.119 ModName: venapi.dll
  ModVer: 5.0.0.3 Offset: 000034df

  Thank you very much for your support

  I found this:
  cfmain.exe - this is a component of the Toshiba network device. Network device Toshiba is Toshiba network device selector. For starters, this application requires a common Module of Toshiba ACPI and hotkey wireless.

  Well, because of this description that I recommend you to reinstall the common modules and wireless keyboard shortcut utility

• Pavilion: laptop does not work well

  Since last year... my laptop does not work. Every day, new questions arise. I'm quite sad. The questions are the following:

  1. junk closing the system while working.

  2 Bluetooth does not work.

  3. system becomes too heated after 10 min.

  4. good quality becomes degraded.

  5 battery backup reduced day by day.

  Please help me...

  Hello, sorry to hear about your problem.

  This is the most likely cause of your problems: "3 system becomes too heated after 10 min."

  See the following article:

  http://support.HP.com/RS-en/document/c01657439

  See you soon

• Signature "by the account" does not work correctly

  Features: iPhone 6 iOS available 9.2 41.1 GB

  I have configured and you can send from multiple e-mail accounts (6 including iCloud) on my iPhone.

  My problem: the signature "by the account" feature does not work correctly. I enable this feature, create distinct signatures, choose to send other than the default e-mail account. However, the default signature in the message, followed two copies of the signature on behalf of which I want to send the message below. I deleted and readded to each email account and of the signature, but find the same result.

  Having this problem as well, or very close.  I can't get the HTML signatures to work (IE, appear) when

  I sent mail from an account that has a.

  This question to a while back in older iOS and has been fixed, now it's back...

  I often crash parameters when you try to paste a HTML signature in place and when

  I have a y arrive, it does not show in the email project.  When I add a text character

  at the signing, he sometimes shows up.  Very erratic...

• the webcam built into my Medion Akoya laptop does not work with Skype

  the webcam built into my Medion Akoya laptop does not work with Skype... Thanks in advance

  Do Skype supported say when contact you?