my Lenovo Y50 accused when his battery on

Similar Questions

• UHD Lenovo y50 screen blurred when on a 1080 p resolution

  Hello world

  I recently bought a Lenovo Y50 UHD. The UHD resolution is good, but some programs appear too small.

  I change the resolution of 1920 x 1080, but she seems to have a blur on the screen.

  I have a Lenovo Y50 touch with a 1080 p screen and when I compare the two TI is not the same quality.

  Text look a little blurry, etc. Screen spend usually blurred.

  Is there something I can do to fix this?

  Thank you

  N ° if reduce you the resolution, several pixels will be used to represent a single one, which will cause the blur effect, which means that you need to run everything in UHD.

• Would be Lenovo Y50 will still work if I remove the battery?

  Hello, I use the computer for a long time (1-8 hours) that work, why I prefer use the form to compare with battery,
  (For more on less than 2 hours maximum battery) but due to Lenovo Y50 do not include removable battery [inserted in the chassis], so I have to use the battery (while it completes) & use only the form to load. It really bothers me because as its far I know not if you use plug + battery at the same time or overcharge your battery (while you use it), it will damage your battery life or your laptop.

  So I would ask, can Lenovo Y50 fuction again using simply plug in without battery inside?

  Thank you

  There are opportunities, it'll work without battery, but if you use a diet less than adequate, the machine could strangle the CPU because it cannot complete the power of a battery.

• Y50 70 low FPS when on battery

  Hi guys,.

  I have a problem with my 70 Y50, i5 4210 H, GTX 860 M, UHD

  When I unplug the power adapter and use the battery I get a dramatic in the FPS drop when you play.

  Is this normal for this model and if not, how can I fix this or it is a hardware failure?

  Before you ask me, consider the following:

  Power management is set to High Performance with minimum CPU on 100% battery.

  The nVidia Driver is set to: prefer Maximum and boost performance at 60 fps in any case.

  When a battery I get 20 ~ 25 fps in GTA V and 20 ~ 35 FPS in Dota 2. With AC get respectively 48 FPS in GTA V, which is the maximum for UHD Samsung display and 50 ~ 60 FPS in Dota 2 (on the HD and nVidia FPS counter showing above 48 FPS).

  Is this normal for this model and if not, how can I fix this or it is a hardware failure?

  Thank you in advance!

  It's normal for most laptop computers (this is not a hardware failure). There is not enough power for the GPU for graphics rendering max.

  Games should always be plugged for maximum performance.

• Lenovo Y50 in delay/stutter

  My fps is the samething no problem is his late and stuttering... Would it be my faulty hard drive or something?

  I change the battery with high performance, change the settings in high-performance nvidia Control Panel and set the configuration of phyx to my gpu...

  All the sick ideas all try.

  Data sheet:

  Lenovo Y50

  Intel Core i7-4700HQ
  NVIDIA GeForce GTX 860 M (latest driver)
  8. 0 GB DDR3L 1600 MHz SDRAM
  8.1 Windows 64

  If you play ONLY on battery then your game will lag.

  Most gaming laptops can play high-end when connected to the power games. The battery cannot provide enough power to boost the graphics of the game, no matter if you put the laptop to high performance.

  Please play connected to power.

  Thank you.

• Lenovo y50-70 WiFi reconnect all the time

  Hello world

  I use Lenovo y50-70 with processor i5 for two months. I'm just tired of trying to fix it myself this is why this post. My wi - fi is *. I upgraded my os to Windows 10 and had problem with 'limited connection', when you had to disconnect and reconnect it to work on the network. I tried many things, but lately I installed some new drivers and so far, this situation is back. But yet, there are some 'loss' connection, because when I try to play some mmo games, I get disconnected server, which I suppose is WiFi always had a problem with my laptop.

  EDIT: it's wifi card: broadcom 802.11ac bcm4352, drivers of 10.12.2015 - broadcom_wlan_7.35.338.0

  Can I please get any help? I can provide info on the plug or that, just let me know which... If all goes well there is a savior to do this, because I'm really tired of this question, and to be honest I have not expected that when I bought this machine

  Sandergin wrote:

  HI, thx for the suggestion, but unfortunately it did not help. Maybe I'll clarify the situation. Internet high speed is very high, for example when I download a file, it goes up to 4/5 mbp/s, but the problem is with the stability of the connection. As I mentioned in my first post, it is impossible to play a multiplayer game, I get the broken link all the time in games such as Diablo 3, WoW, or now in the Division. I got all new drivers, my internet provider is UPC. There is no such problems, even with regard to the internet on the phone on the other laptop.

  Any other ideas please?

  Yes, but the problem as it involves a lot of troubleshooting steps. And given suggestions is one of the first check, you need to perform. Your problem is a limited number or abandon the connection. Check the compatibility of your router with your wireless card. The setting in the configuration of the card. Change the channel you are using. If you have 5 Ghz band try this out.

  I have this problem a few weeks ago and did what the technician of the isp is to just get the details of my modem (he is very interested to scribble information it receives) and declare that my router is to blame without a test at all. After that, he leaves and drop a service for an hour with his boss. After that, I discovered that the ISP is actually to reduce latency. There is actually nothing wrong at all in the installer than some hideous moving from my ISP.

• Lenovo Y50-70: Crash suddenly

  The machine is not even 2 weeks after the first start, and he already has a few problems... Laughing out loud

  3-4 accidents were from the days where there is no blue screen or overheating or suspended upward, just a pop hard and instant stop.

  It happens when the machine is on battery and during the laborious and do activities (high end-> browsing the internet games).

  Here I assume that all the drivers are up to date because he is recently bought and even then, I checked that some drivers are updated and updated lenovo confirms this.

  Please tell me if you need other information.

  Computer laptop specifications: -.

  Lenovo Y50-70 (59-440646)

  Processor - Intel Core i7-4720HQ CPU @ 2.60 GHz

  RAM - 16 GB PC3 - 12800 1600 MHz SDRAM DDR3L

  VRAM - 4 (GTX 860M) + 1Gbytes (Intel HD Graphics 4600)

  BIOS version - 9ECN37WW (V2.01) by Lenovo

  OS - Microsoft Windows 8.1 (6.3) 64-bit (Build 9600)

  Hi Sky1409,

  According to dump files, there is a problem with the NT file system, please reinstall the operating system and control for the issue. Please take the backup of the data before you reinstall the operating system.

  I hope this helps. Do not post back if the problem persists.

  Best regards

  Ashwin. S

• Help | Lenovo Y50

  Hello, today I have upgraded to windows 10. I made a clear installation and when it's over, I have installed and updated all the drivers to the most recent (some on the site, some IObit booster driver and windows update) but I noticed that I have no applications of lenovo (power management and etc...) and I need the power supply for the battery management escape option that would let me not damage my battery when let it stay charged because im using lenovo Y50 load it allows me to use 100% of the capacity of the GPU. How can I get the software? because I found a driver, but he gave me a weird version of it. I also have other applications of lenovo as parameters of lenovo or dolby theather.

  Good day and welcome to the community.

  In case you do not have the link, the first place you should check for drivers is your support of model site:

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/Lenovo-y-series-laptops/Y50-70-Noteboo...

  Hope this help a little.

  Kind regards.

• Use of AC when the battery is at 100%? (S7-391)

  Hello world!

  I have been affected by the worst support from Acer, I have no problem with the ultrabook himself (Acer Aspire S7-391) but I have some doubts about pilots and other things, that they have avoided answering many ways. So, here's the thing:

  This ultrabook has all drivers that could be use the AC power when the battery charge reaches 100% to avoid tampering with the battery?

  The thing is that while I have 100% of the battery and the ultrabook is connected to the power adapter, it always seems to be draining the battery power and recharging it back to being 100% all the time.

  When I ask about the drivers, who might or might not be installed, I just need to find a way to access this functionality if possible, and if I can't, I need to know as soon as POSSIBLE so that I can start unplug the laptop right after that the battery has reached 100%.

  Thanks in advance.

  As you said with Connector 2 power pins can also disconnect the battery charge. It can disconnect the power supply from the battery charging circuit when the battery reaches a particular % with the laptop running load in power cables. I do not think that your computers support portable setting the level of charge of battery to a % custom. Your laptop must have a particular hardware and BIOS that supports. In some laptops, the BIOS has the ability to define a particular % of battery charge. I read somewhere that windows 8 do not support this feature, old version of windows (Vista) support this feature.

  Some write up I found online to help you.

  Memory effect

  First of all, it is necessary to unfold a myth that persists in the minds of many people.

  The effect of stack memory.

  In the basis of lithium batteries, it is in fact a myth, it applies only to the old nickel-based batteries. Therefore fully discharge and recharge the battery are completely useless and even harmful as discussed below.

  The modern lithium battery can be charged independently of its current percentage, because he has absolutely no negative effect in his performances.

  Should I remove the battery when the a/c is connected?

  Many users of portable computers have this question and we will answer it right now:

  The answer is: YES and NO, it depends on the situation.

  Have a fully charged battery and the laptop is connected is not harmful, because as soon as the load level of 100% of the battery stops receiving the energy load and this energy is shorted directly on the power of the laptop system.

  However, there is a downside to keep the battery in the holder when the laptop is plugged in, but only if he currently suffers from excessive warming caused by the hardware of the laptop.

  So:

  -In normal use, if the laptop does not get too hot (CPU and hard drive around 40 ° c to 50 ° c) the battery must remain into the Jack of the laptop;

  -Intensive use, which leads to a large amount of heat produced (i.e. games, temperatures over 60 ° c) the battery should be removed the socket in order to avoid unwanted heating.

  The heat between the fact that he has 100% load, is the great enemy of the lithium battery and not the plug, as many might think so.

  Battery discharging

  Full battery discharges (until the computer laptop power shutdown, 0%) should be avoided, because he insists a lot on the battery and may even damage it. It is recommended to perform partial discharge to levels of capacity of 20 ~ 30% and frequent accusations, instead of performing a complete discharge followed for a full charge.

  Laptop PC battery contain a gauge of capacity that allows us to know the exact amount of stored energy. However, due to the charge/discharge cycles, this sensor tends to be inaccurate overtime.

  Some laptops include in their BIOS, tools to recalibrate the battery meter, which is nothing else than a full discharge followed by a charge complete.

  So to calibrate the gauge, it is desirable, in all cycles 30 discharge, a full uninterrupted discharge, followed by a too, non-stop, full charge.

  An inaccurate gauge may have to the fact that the capacity of the battery are values are false. The battery can report that he still has 10% of capacity, when in fact it has a much lower value, and this causes the computer to the unexpected shutdown.

  Cycles of discharge (or charge) are to use this charge battery (100%), but not necessarily all at once.

  For example, you can use the laptop for a few minutes in a day, using half of its e ability then it load completely. If you did the same thing the next day, it can be considered a discharge cycle, not two, so it may take several days before finishing a complete discharge cycle.

• When unplugged, battery still reads 100 percent, dies a few minutes

  Whenever my Y40 is unplugged, the computer shows the battery to 100% and never decreases. A few minutes later, the computer will turn off and will start. When I plug back in and turn it on, it shows the battery is very low and load normally, then shortly after showing 100% fully charged (it isn't). I tried the system restore and the following, which I saw posted in several places:

  "First of all, shut down the laptop, unplug the power adapter, remove the battery and then hold the Power button for 30 seconds.
  Now plug the power adapter without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for batteries, click right on and the Microsoft ACPI compatible with battery control method and select uninstall - do not uninstall anything else here. When the uninstall is complete, shut down the laptop, unplug the AC adapter, reinsert the battery and then start the laptop's battery. Windows will automatically reinstall the driver - leave Windows running for a few minutes and see if the battery level decreases as it should. »

  I don't know where to go from here. I bought the computer last year and suddenly started questions recently. I recently installed Start Is Back, but the Advanced System Restore does not resolve the issue. I am running Windows 8.1 and everything seems to be up to date. Any advice?

  In response to customer relationships of unexpected behavior portable Y40 - 70 and Y40-80 meter battery, Lenovo has determined that the battery meter software is working as expected. The unusual calibre results being reported are the reflection of the battery reaches the end of life.

  Lenovo has launched a CUTTING-EDGE Service to help customers get the battery replacement under warranty, or if more warranty, find a spare from suppliers approved by Lenovo battery. The Service TIP can be found here: https://support.lenovo.com/us/en/solutions/sf16-I0023

  The numbers for Y40-70/80 batteries are:

  Y40 SP / A L13M4P01 7.4V48Wh 4cell IBE (Y40-70/Y40-80) 121500248

  Y40 LG L13L4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500249 replace the 121500251 part

  Y40 CP/C L13C4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500259 replaced by 121500251 of the part

  To determine what battery supplied with your computer laptop Y40, instructions to remove the lower cover can be found in the manual of Maintenance of equipment pdf here. An alternative to opening your system (which do not cancel warranty) is to find batteries using the product/model number located on the bottom cover.

  Thank you

• Lenovo Y50 - 70 flickering screen

  Hi, I recently bought my Lenovo Y50 and begins to have the screen flickers. There are lines horizontal flickering and the screen flashes. This is more apparent when the charger is connected and when you watch videos. I can immediately see him flickers when I turn on my pc, even if the charger is not plugged in. Can someone help me solve this problem? It's really me mind, as it was only about 2 months because I bought this laptop.

  
  

• Lenovo Y50 always have the hinge breaking the problem?

  -Does anyone know if Lenovo Y50 is still having the screen display hinge break or blow up the basic problem?

  There are a few things to consider here-

  (1) Yes, about 20 people are are complaining here, but I'm sure that thousands have bought this laptop. I think this is a defect of manufacturing, but only to a specific line. (I know should be fixed, but I don't know if it was)

  (2) you can always opt for another laptop or buy this one and follow the loosening of the screw (ONLY if the streams of your screen and hinge when opening).

  I had great experience with laptops lenovo 3 (Y560, Y510P, Y3Pro) and that's why I'm here to spread this positive information and help around the community. Whatever you choose, good luck and happy playing.

• For lenovo y50 cooling pad

  Hi, can someone suggest me a good block of cooling for lenovo y50

  Y50 fans look like they are in the same way they are in most laptops. They suck in air from the bottom and exhaust is placed on the sides or the back. In most cases on the rise, the desktop is sufficient to lower the temperatures of a few degrees. I myself did not use the fan in my block of cooling for centuries. It is more comfortable to use when he raised and tilted, and also the air flow is improved. And then I game not on my laptop for games more. When I got to the big finish cpu in my laptop (that the footer) and overclocked my GPU and memory, I removed the bottom cover of my Y580 and the fan on. The temperatures where there is a little lower, but I made it mainly to keep my HDD cooler because it gets really hot in this laptop under load.

• Beep is annoying when the battery is at 10% Y650

  It listed essentially the same question in the thread Y550 (http://forums.lenovo.com/t5/IdeaPad-Y-and-U-series-Laptops/Y550P-Low-Battery-Beep/m-p/200159#M18937)

  After reaching the remaining 10%, the battery starts beeping each about 10 seconds until you plug in an AC adapter.

  A BIOS version to stop the beep would be appreciated. As my laptop starts beeping when I'm in class and which is not good.

  Thank you

  Bryant

  Hi all

  I'm sorry for the late reply. I was not around when the new biox was released last week.

  Anyway, you will find the links here for download.

  32-bit Win XP, Win Vista, Win 7 - 15CN35WW (V2.08_x32) .exe

  64-bit win Vista, Win 7 - 15CN35WW (V2.08_x64) .exe

  Your trouble of having to beep when the battery is low should be fixed now. =)

  Thank you for your patience.

  Kind regards

  Cleo

• Lenovo Y50 cannot install Windows 7 - no device drivers were found

  Hi I just bought the laptop Lenovo Y50 and wanted to install windows 7 Home premium 64-bit instead of preinstalled windows 8. I use the external dvd drive because there is not an intern. I had to change the start of the legacy settings to boot from usb. However when I get to the part where I press "install windows" error comes up saying that no device drivers were found. I am able to navigate and see my sheets but not able to select one. Help, please! Thank you in advance.

  Moved to other/unknown install, upgrade and activate Forum.

  You should consider dual-boot instead:

  You will first need to go to the website of manufacturers for your model computer and first find out if there are native drivers in Windows 7. A large number of computers that are preloaded with Windows 8 have no native driver support for Windows 7 by the manufacturer. If there is no native driver, you will need to consider returning the machine and buying a machine preloaded with Windows 8 Pro with downgrade rights to Windows 7 Professional. Or look through the catalogue of manufacturers for systems already preloaded with Windows 7, usually the business sector will have these options.

  Return the laptop if it came preloaded with Windows 8 and purchase one already preloaded with Windows 7, they are always available:

  http://www.ZDNet.com/where-can-you-find-a-PC-running-Windows-7-7000013418/

  How downgrade:

  http://www.PCMag.com/Article2/0, 2817,2417359,00.asp

  Backup before reinstalling Windows 7:

  http://techingiteasy.WordPress.com/2012/10/29/how-to-backup-your-Windows-8-installation/

  Look at the dual-boot

  Follow step 1 to 5 in this tutorial:
  Downgrade from Windows 8 for Windows 7

  That follow this tutorial: (uEFI-mode Setup).
  Installation of the Dual Boot - Windows 8 and Windows 7 or Vista