Would be Lenovo Y50 will still work if I remove the battery?

Similar Questions

• Recovery disks will still work if I wipe the HARD drive?

  Hey everybody! I have a quick question and I hope one of you can tell me if I'm about to make a huge mistake.

  My HP Pavillion Dv6 had serious problems and chkdsk deleted a lot of clues. I worked on the problem of HARD drive and looks is not default (no bad sectors, only of weakness). I read that zero-filling can help with HARD drive problems.

  My only question is that I don't know if I'll be able to just reinstall after I have zeros, because the building programs will be wiped. I have an application and Driver Recovery CD and a DVD of system recovery that I have used before. These will still work if I have zero filling? Or I need something else?

  Thank you very much for your help!

  Sadie

  Hi Sadie,

  Yes, your recovery disks will work if set you to zero the whole HARD drive (they would also work on a new HARD drive if you need to replace the existing one).

  When reloading the operating system, you choose the "Factory Reset" option will reinstall the OS and recreate all the original scores.

  Kind regards

  DP - K

• IPhoto (no pictures) will still work with the update of v10.11.6?

  I want to continue to use iPhoto because he has a few features that doesn't have pictures, so I want to make sure that iPhoto will still work if I install this update.

  As long as it is already installed, mine still works (I don't know if an installer would still work). Skip the new Photos app that will be installed if you don't want to use it.

• my windows will still work if I update my mac operating system

  my windows will still work if I upgrade my mac osx operating system to the next mac os sierra

  I bought my iMac windows7 2011 with lion, installed in training camp

  Leo to lion mtn upgrade, upgrade windows 7 to 8

  updated mtn lion to maverics, windows 8 to 8.1 upgrade

  put Mavericks at yosimar, upgrade windows 8.1 to 10 level

  updated yosimar at el capitan

  None of the improvements on each side have ever on the other side

  but there were a lot of people talk about people who, after the initial installation of bootcamp, resizing their scores with problems during the upgrade to osx where windows stop working correctly

• Photoshop CS4 and Prime Elements 8 will still work with Windows 10?  Currently on Windows 7 64 bit

  Photoshop CS4 and Prime Elements 8 will still work with Windows 10?  Currently on Windows 7 64 bit.

  Laurence, CS 4 and elements are now end of life, we have limited resources for them. They have never been tested in 10 to win, that's why you may find some compatibility issues.

  Please check the system requirements.

  • System requirements | CS4, individual products
  • System requirements | Adobe Photoshop Elements

• If I buy adobe Elements 10 or later what software should I make the DVD to mov files, the files are large and I know they must be compressed and I don't want to lose quality... I know that adobe pro you still need software, but will still work with el

  If I buy adobe Elements 10 or later what software should I make the DVD to mov files, the files are large and I know they must be compressed and I don't want to lose quality... I know that adobe pro you still need software, but will still work with the elements and may itself make the compression... I know it can burn DVDs...

  vidog

  If you burn to a DVD disc in first items 10 and later versions, some choices are

  a. DVD-VIDEO standard screen or 4:3 16:9 on DVD disc

  Both will have the frame size of 720 x 480 pixels. But the big screen comes with a 16:9 flag that extends approximately 856/480 16:9 display video after encoding. The screening is not adjustable by the user... and you end up with the DVD-VIDEO format @ 29.97 images per second interlaced.

  b. format of the AVCHD on DVD

  Here is the video display 1920 x 1080. And, depending on the version, can be 29.97 images interlaced per second, or 23.976 progressive frames per second (if not just 29.97 images per second interlaced). Although you can generate some AVCHD DVD with a regular DVD burner, DVD AVCHD is in need of a blu - ray player that supports supported AVCHD DVD or one of these drives multimedia multi which is also.

  c. If the player allows... you can export your Timeline file saved on a USB Flash drive and then insert this USB Flash drive in the drive to get the reading of the file. On this route, you can set the Premiere Elements avancΘs to customize your choice of export preset.

  Please consult the bulletin and consider then, let us know if we have targeted your question. If this isn't the case, please give more details in the areas where we do not have.

  Thank you.

  RTA

• My 2010 CS4 serial number will still work if I re download and install the software? My 2010 CS4 serial number will still work if I re download and install the software?

  My 2010 CS4 serial number will still work if I re download and install the software?

  Yes, as long as you dl exactly the product that matches your serial number.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine, but of course, this should work if you think you need.
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.

  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.

  The scans by operating clean, reboot, test and we can fix any other issues

• Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?

  Windows easy transfer will not work.  I get the message: "migwiz.exe - point of entry not found.  How can I fix it?

  Hi PTTimothy

  1. what operating system is installed on the computer?

  2. you are the administrator of the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Step 1:

  You can open the administrator and verify if you can open Windows Easy Transfer correctly.

  You can even check if you face the same question in the user account different or new user account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  An analysis of the SFC and audit-
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• If I cancel my subscription will still be able to use the products that I downloaded?

  Hello

  I wonder about buying a subscription cloud creative adobe but I want to know if I will still be able to use the producats I downloaded if I decide to cancel.

  Laughing out loud

  Other than the initial trial period of 30 days, you may use the software only if you pay a member.

  This is a subscription service. As a Subscriber, you can use the software. When you cancel, you lose access until you join.

• Satellite C660D - 10 d will not start unless I have remove the battery and reinsert

  Present a strange problem that I can't solve.

  Brand new, open all laptop worked perfectly.

  Turned off normally and left it overnight with the power supply connected.

  Next day morning pushed the button market / stop the portable green power on but light did not start.

  Press and hold the button for 10 seconds does nothing.

  I remove the battery for 10 seconds and put again and then you press the power button and you get a full boot up normally.

  Everything on it works perfectly, you can restart the laptop without problem, you can even turn off then turn on half an hour later with no problems.

  This problem occurs only when it is off and that the power is plugged in for several hours.

  Back to toshiba warranty, I've attached a note explaining the problem and even returned what he locked up so he wouldn't turn until they removed the battery.

  10 days later they returned it saying that the intensively checked the laptop and found no abnormalities.

  I plugged the battery and pressed the power button / stop and the same question once again outside of this period, that the fan runs for 2 seconds then turns off, I removed and re inserted the battery about 15 times before it started normally.

  Last night went out as normal and this morning the question of the standard of don't turn is not on at all.

  Just to clarify him when the power supply is left connected overnight or for several hours so that the system is power off the laptop does not start, the Green led lights, no fans spin, no sign of life. One way to start is to remove the battery for 10 seconds.

  I've been on toshiba again and said that if I return it a second time and they can't find a fault that I would have to pay £80 for it returned. I recorded the fault to prove that they is a fault but they seem not interested in that.

  Up to now, the bios has been updated, reinstalled windows, I can't replace drive HARD or RAM that the warranty will be voided. However issue and im 90% that this is a motherboard.

  All the ideas that I'm completely stuck on this one!

  Sorry to hear you I have a problem with your laptop.
  Problem you have is certainly hardware related issue and it should be solved by Toshiba.
  In my opinion you should not spend money for new parts, trying to solve this problem.

  Laptop warranty valid and should be set the laptop for free.

• computer falls asleep and only wake him up is to disconnect and remove the battery and it will come back, and then reinsert the battery it's a dell

  My computer is asleep and won't wake up. If I unplug the unit and remove the battery, it will be ok. Then

  I can reinstall the battery. It's a dell intel Insider core 13

  Hi Jim,.

   

  This problem may occur because of low battery or power problems. Please follow the instructions to solve the problem:
   
  Refer to the suggestion of Leo Huang dated Tuesday, September 14, 2010 09:01
   
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/0866de60-A16B-41c4-8a6e-b56c848478f3
   
  Let us know the result. If the problem is still not resolved, we will be happy to help you further.

• my iphone 5 c screen stops working when I remove the case

  my iphone 5 c screen stops working when I remove the case

  Delete this case? Please explain what you ask a little more clear.

• Satellite A200: Should I remove the battery when working on the power supply

  Hello

  I've been running an A200 machine for the last 2 months, bought as a desktop replacement in order to fit in my small apartment. I realize now that I never ued work on battery - it is always powered on sector. Since this is unlikely to change, should I remove the battery? Deing battery degrades remaining in the machine while it is continusouly by the industry feeding, or does it not matter?

  Thank you very much in advance for your reviews.

  GW.

  You can remove it, but it should not be done. For me, it's stupid to remove the battery and let the dust make the battery place dirty. The batteries we use today are very good and Scott wrote the electronic power supply just to check if the battery is full and care the battery and the battery capacity.

• Lenovo Ideapad 100: Removing the battery

  Hello, I have problems with my removing the battery. As my title says, I have a Lenovo ideapad 100, and I'm supposed to send it off for repairs. For my problem, I need to take out the battery because it is not part of the problem; However, I can't get out. I've read here to take off the base, but in trying to do this, it seems he breaks the internal clamps keep attached. I don't want to keep these break just to pay for them to be repaired afterwards. Is there an easier way to take this base off?

  Those who may be generic instructions. In the case of your machine, you can contact the Service to confirm, but my feeling is that it does not apply to batteries regarded as cards.

  Kind regards.