My lumix fz330 is listed as having raw support but I can't convert files

Similar Questions

• C: drive turned into raw and now I can't see file display options etc on my computer.

  Original title: instability of the system.

  I have xp s3. I had trouble with my main drive lately. Previously, I had my shot raw c drive and I can either logon in safe mode. I used checkdisk by my slave hard drive someone to another disk and it comes back with a few interface problems. Yet once the obtained c drive turned into raw and now I can't see file display options etc on my computer. I tried to use to start the system restore but not its use before and now. I have avira for antivirus and Registry Mechanic only. Is there a way I can fix my windows without formatting evrything?

  Hi Windflash,

  I had a similar problem also and it turns out that the hard drive is dead. You can probably do is to connect the hard drive to a working another computer & use data recovery tools to recover files from it but usability will always be a question.

  Data recovery is an another stressful job as for me it took 3 days to recover data to a 500 GB drive.

  After which I tried to format it own it but has not as well so I poured the reader.

  You can try my snack suggestions if your drive starts to work again I strictly recommend you to use it as a primary drive.

  Let me know if it helps.

  [If this post was helpful, please click "Yes" under "Was this helpful option?". If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How can I download NFE raw support 8.8, 9.0 plugin file

  How can I download NFE Raw file support plugin

  8.8, 9.0

  Hi szeyam

  Use this link to download the latest Adobe Camera raw 9.1.1 install plug in Camera Raw

  See also supported by Camera Raw devices

  Concerning

  ~ Assani

• Will Adobe Camera Raw DNG Converter 7.4 or the work version 8.7.1 on premium design CS5.5 Adobe on a MAC OSX Version 10.7.5 Lion, I recently acquired a new X100S of Fuji camera that is listed on 7.4 Mac download, I can't open the Raw of RAF FRO files

  Will be Adobe Camera Raw DNG Converter 7.4 or the work version 8.7.1 on premium design CS5.5 Adobe on a MAC OSX Version 10.7.5 Lion, I recently acquired a new X100S of Fuji camera that is listed on 7.4 Mac download, I can't open the files Raw of RAF of the camera in photoshop CS 5.5 or will I have to spend to CS6 and it will work then?  Thank you very much, Paul

  I'm afraid that the answer is the same as your other request. It is not a question of the difference between Photoshop CS 5.5 and the Design Premium version. This is the version number. And Photoshop CS Design Premium 5.5 is only compatible with Camera Raw up to 6.7. The DNG Converter is always your best choice if you're not ready to upgrade your Photoshop.

  But then I realize I have not read your question closely. The DNG Converter does not work with any program. It is a separate stand-alone program which is used only to create copies of your DNG (digital negative) raw images. You can use the DNG Converter as your software download, conversion of images as they are transferred to your computer. Then, you will be able to open them with older versions of Camera Raw that are compatible with your version of Photoshop. Some people fear that the DNG Converter means a step further. But if you use it in your download software, I think you will find that it can streamline things considerably.

  When you configure the DNG Converter, make sure that a compatibility option that is compatible with your version of Camera Raw. Also, take note that the DNG Converter will prompt you for a FILE containing raw images. Choose the folder, but do not open it.

• Cannot sync picture added to the collection on Lightroom Mobile iOS 2.4 (with the last RAW support)

  Hello

  I have the following timing problem:

  1. I created the new collection of event using Lightroom Office and added some photos to my DSL
  2. And then synchronize this collection with my last Lightroom 2.4 Mobile iOS (last with RAW support)
  3. Using LR Mobile has added some photos to the additional event captured by my iPhone to the same previously synchronized collection
  4. It seemed that everything worked ok... the new picture has been added to the collection on LR Mobile, it is also visible in LR Web... but
  5. ... when I run Desktop LR he tries to synchronize this 1 photo indefinitely... it never stops and my LR Office is the synchronization...... synchronization synchronization... showing 'Sync 1 photo.

  When I create new collection of my Mobile LR (and the first step in office), then add picture... then everything works well... but it isn't I wish I had. The ideal situation is when I normally treat most of the photos of the event, coming for example from my DSLR and then could be added to the collection even some additional shots of the iPhone directly in LR Mobile so it could appear in LR Desktop collection with photos DSLR.

  Any help will be much appreciated.

  Kind regards

  Alex

  Have you double checked the status of clouds within the application Mobile of Lr. are still pending downloads listed. If so, the County gets down when you have Lr Mobile running for a few minutes in the foreground? -Guido

• The RAW files on the SD card "appear to be damaged or not supported" but JPEG work very well.

  When I use my Rebel T3 SD card, jpegs load very well but lightroom 2.7 will not load the raw on a SD card files. Anyone else having a problem with that?

  Devices supported by Adobe Camera Raw

  The Canon Revel T3 was initially supported by Lightroom 3.4.1.

  You will never be able to open this camera Raw files in Lightroom 2.7.

  If you do not upgrade then you must download the free Adobe DNG converter, convert all the Raw files to DNG and then edit DNG files in Lightroom 2.7.

  Digital Negative (DNG), Adobe DNG Converter | Adobe Photoshop CC

  Camera Raw: How to use Adobe DNG Converter - YouTube

• I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

  I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

  Hi tonyf,.

  Greetings!

  Each device is compatible with a minimum version of camera raw.

  Here is the complete list: https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html

  Please check if you have this version of the camera installed which include your raw files.

  It would also be that your photoshop will not have to install this version of camera raw as its very old.

  In this case, you can convert your raw files to DNG and can use it.

  To convert the files to DNG, you must download and install the DNG Converter.

  Here is the link:

  Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows

  MAC: http://www.adobe.com/support/downloads/product.jsp?platform=Macintosh&product=106

  Concerning

  Jitendra

• Create the list of virtual machines to exclude the script through .csv file?

  Hello

  I have a script that runs all day off hours to check my VMs respect some things, like having the option to 'VM tools upgrade policy' checked. The script will export a list of virtual machines that DO NOT have this option enabled and then later to fix the problem. Now, for some specific VMS, I don't want to have the option active and want to exclude them from this review. I try to add a list of these virtual machines I want to exclude from my check script of VMTools_UpgradePolicy via a .csv file containing their names. Here's what I have:

  ##############################################
  #VMTools update during the feeding cycle - report
  ##############################################
  function Report_VMTools_UpgradePolicy {}
  $list = import-Csv "C:\VMware\PowerCLI\Scripts\EXCLUDE LIST\EXCLUDE_vmtools_upgradepolicy.csv".
  foreach ($entry in $list) {$exclude = Get-VM-name $entry. Name}
  $vms = get - Vm | where {$_.} Name - not $exclude - and (Get-View-Id $_.) {ID). Config.Tools.ToolsUpgradePolicy - eq 'manual'} | Select name
  $vms | Export-Csv "C:\VMware\PowerCLI\Scripts\REPORTS\vmtools_upgradepolicy.csv" - NoTypeInformation
  }

  The content of the EXCLUDE_vmtools_upgradepolicy.csv is as follows:

  'Name '.
  "VM1.
  "VM2.

  "VM3.

  I try to get all the virtual machines in my environment who have the ToolsUpgradePolicy - eq 'manual' (unchecked), AND which do not match any of the names on my list of exclusions (VM1, VM2, VM3). My script so far will do what I want, except that only the last entry in my list of exclusions will take into account. VM1 and VM2 will still be reported as VMs that need to be addressed.

  I'm not sure that I am taking the right approach with this, I will continue to seek a solution for what I want, but any help would be appreciated! I prefer to make my list of exclusion to a separate file, for example "EXCLUDE_vmtools_upgradepolicy.csv", because I want that other administrators to be able to just open this .csv file and add virtual machines to this list without having to touch my scripts.

  Thank you!

  Vince

  Hi Vince,.

  It is like that I think because of your statement:

  foreach ($entry in $list) {$exclude = Get-VM-name $entry. Name} -> it
  $vms = get - Vm | where {$_.} Name - not $exclude - and (Get-View-Id $_.) {ID). Config.Tools.ToolsUpgradePolicy - eq 'manual'} | Select name
  $vms | Export-Csv "C:\VMware\PowerCLI\Scripts\REPORTS\vmtools_upgradepolicy.csv" - NoTypeInformation
  }

  $exclude is a variable that contains only 1 entry., that's why you see only the last element inside. It will not be an array.

  foreach ($entry in $list) {[string []]+ $exclude = Get-VM-name $entry.} Name}

  This will fill $exclude table with entries of string that will contain the names of virtual machine.

  And when you will be comparing. I think you should use

  where {$exclude - notcontains $_.} Name - and... the rest

  Kind regards

  Greg

• Camera Raw Support for Canon 7 d MkII

  Just try to get an idea if I should spend the $99.00 to buy at the Apple Store opening.  This may seem a little over the top, but the workflow, I miss by not having not RAW support in Lightroom is worth the expense of buying from opening.

  I find it very disappointing that Adobe do not have as the support yet for the new Canon 7 D MkII.  It is a VERY popular camera.

  Mostly I find this slowness on the part of very disappointing Adobe because they sell CC buy saying: "you always up-to-date software.  When you think Apple and Google Picasa have already taken care of the Canon 7 d MkII.  I might add that they had both for the camera within days of its release on October 31.

  So, after my little mug shot.

  Someone from Adobe can advise when we see Camera Raw support the new Canon 7DMkII?

  Although it is in beta, I'd be very happy to be a beta tester.  I have extensive experience in software testing and would be ready to do the beta-test structure.  I would be very happy if someone on Adobe Labs would contact me to Beta test for the 5 d MkII 7 Camera Raw support.

  Kind regards

  Tom Croll

  We have just released the new support for the 5 d MkII 7 with Lightroom 5.7. Here are the details from the release: 5.7 now available Lightroom

  Let us know how it goes.

  Kind regards

  Pete

• Third-party TTS voices appear in the list of agents of speech, but Sam eventually read

  I'm trying to use a trial version of Yvonne voice to generate text-to-speech in CP5, to test the ability. Ivona speech agents appear in the list of voices in Captivate, but when you generate text-to-speech, Microsoft Sam ends up being the voice. Is there an extra step, I'm missing? I was able to make it work with the demo version of Cepstral voices, but I'm having a problem with the voice of Yvonne both Loquendo. Has anyone got this working, and if so, what are the steps missing?

  I should mention that Loquendo and included with Captivate Neospeech voices work very well. In addition, it is a purchased version of Captivate 5.

  Thank you!

  Hello

  Thanks for the nod. I wanted to see the dialog box to check if the speaker is defined as Yvonne. Indeed, it is that I can see the snapshot of the dialog box.

  As you mention speaker by default, Windows ends up reading the text. You can try the following.

  1. Start Control Panel for Windows 7

  2. Locate the icon of 'Voice recognition' and launch the speech properties dialog box

  3. go to the "Text to Speech" tab in the dialog box, and then select the voice of Yvonne (if present in the menu drop-down)

  4. with a default text preview voice.

  Check-out at the 4th level if Ivona voice reads the text or Sam bed. Let me know

  If here Ivona does not read then it might be a problem with the voice. If Ivona reads successfully then launch Captivate in trial and in Admin mode the generation of speech processes again.

  Let us know if it worked.

  Thank you

  Ashwin B remi

• Camera Raw CS4: cannot open more than one file?

  It is a very strange problem. I recently installed CS4 and started using it with a Canon 5 d RAW files Mark II camera. By choosing File-> open as-> Camera Raw, I can't select more than one raw file in the file dialog box. I can not open a single raw, no problem, but no matter what I try, or ctrl-A, now the SHIFT key or ctrl does not allow me to open several files. With the CS3 version, that it worked well.

  Is there a setting in preferences to control this (seems very strange there)

  PS: I see that there are two selections available in the list Camera Raw file types: what is the difference between them?

  Thank you

  If they are raw files, then simply use File-> open, you just go the file-> open as a route if you want to open JPEGs in Camera Raw without going through the bridge.

  There is no point in listing of camera Raw file formats because each device produces its own version anyway, one. CR2 file produced by a camera is not the same as that produced by another camera, the Camera Raw plugin must be constantly updated.

• I installed "downloadhelper". It shows in the list of add-ons/extensions, but it does not appear in the toolbar

  I installed "downloadhelper". It shows in the list of add-ons/extensions, but it does not appear in the toolbar. I reinstalled foxfire, various foxfire files updated, tried other modules, but none of this helps.

  Have you tried to click on "Restore default settings" in the palette to customize?

  Have you checked the settings in the VDH extension?

• I did a new address book list and added 12 emails. How can I view the separately?

  Each of the new contacts and emails that I added to my "new list" in my address book appears in my "personal address book".
  I want to check this list is complete, but I can't find a way to display it.
  The personal address book icon shows a subdirectory under my new name for the list, but when I click on it it shows a blank page.

  Contacts must be in the address book created in the list. He is not a second entry. It is a contact that has been added to a mailing list.

  This explains the mailing lists.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Create_Mailing_List

  If you are wanting a different address books to separate the contacts then create a new address book.

• I can't find a list of the RSS FEED so I can remove a. I import into Outlook, where I deleted the flow, but can not reload the RSS.

  When I use Explorer, there is a place that lists all the my FLOW RSS I can delete, open, etc... I can't find a similar place on FireFox.

  There is an RSS feed that I have download problems on my Outlook, and I would like to remove the workflow & recharge. (I deleted my Outlook.).

  Any suggestions on where I can find a list of my RSS FEED?

  Firefox does not have a specific list of items in RSS feed.
  
  Those who are treated like all the other favorites and are managed in the bookmarks (library) Manager.

  • Bookmarks > show all bookmarks

  IE stores each favorite as a separate folder on the hard drive and probably need a special treatment for its elements of flow, but Firefox stores the bookmarks and history in a file places.sqlite database.

  So if you have not placed the RSS all items in a folder of bookmarks or otherwise marked then them it will be difficult to locate them all.

  • https://support.Mozilla.org/KB/live+bookmarks

• On the right of the adressbox, I always have Yahoo then Google, how can I solve that, I already delete Yahoo from the list in the box search, but every time I start firefox Yahoo is back. Thanks Ron Mijtelen ter, Amsterdam.

  Question
  On the right of the adressbox, I always have Yahoo then Google, how can I solve that, I already delete Yahoo from the list in the box search, but every time I start firefox Yahoo is back. Thanks Ron Mijtelen ter, Amsterdam.

  Hi Ron,

  Have you looked at article in the Knowledge Base using the search in Firefox bar? There are lots of good information in there. You happen to have an installed Yahoo! toolbar? You must disable or delete as well if you do. Try to start Firefox in Mode safe mode by holding down the SHIFT key while starting Firefox. If you have any problems using the safe, it's a matter of add-on or extension.

  Hope this helps!