Similar Questions

• Computer does not restart after the update

  Description of the problem: I am unable to restart my laptop after receiving the update of microsoft onSaturday.  I have a gateway MT6707.

  I got the following error. "Unable to start Windows.  A recent hardware or software change might be the cause.

  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, choose start windows normally. »

  Start the reboot system (recommended)
  Start Normal Windows

  No matter which option I choose, the system attempts to restart and takes me right back to this screen above information.

  No other changes have been made to the other than the update.

  Please let me know how to proceed.
  Operating system: Windows Vista

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• 29RC1 Firefox does not start when the update service enabled.

  W8.1 update 1 running. I installed FF29RC1 that works without problem, however when I close FF I can't repeat it because it says its already running. When I stop the service of FF in the Task Manager, turn off the update in the FF options, it works wihthout no problem and I can start FF whenever I want without any problem.

  29,0 Firefox has been released, so no need to install a release candidate.

  You can find the full version of the current version of Firefox 29,0 in all languages and for all systems operating here:

  • http://www.Mozilla.org/en-us/Firefox/all.html

  Have you checked in the system monitor if there is still a running Firefox process?

  Did you install Firefox in your user account (~ or/Home / < user >) or in a place that requires root for write access privileges?

  See:

  • http://KB.mozillazine.org/Profile_in_use
  • https://support.Mozilla.org/KB/Firefox+is+already+running+but+is+not+responding

• system does not restart after the update?

  I downloaded an update to microsoft web view for my windows XP home Edition... it's KB9955759

  "After you download was finished, then I tried to restart my computer as it has been restarted I tried to say, log in under my user name, then a pop box brought up something like" windows cannot load the locally stored profile. Rights of possible insufficinet?

  I can't connect in safe mode but not in normal mode?

  any suggestions

  John

  If you start in Mode safe mode, uninstall KB955759 & reboot, the behavior persists?

  Despite what http://support.microsoft.com/kb/955759 suggests, KB955759 isn't a critical security update. After you have uninstalled KB955759, you can use the difficulty here to achieve the same ends, if you wish: http://support.microsoft.com/kb/954157 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite Pro A300-15 t does not restart on the current after BIOS update

  Hello

  There is something wrong with my Satellite Pro A300-15 t. I made an update of the BIOS of toshiba recently with the latest Web site and it installed successfully. But after the installation, I noticed that my laptop does not restart when it is connected to the power adapter. It restarts and works perfectly when its power on the battery.

  After restart or start-up the laptop (on battery), it will be well when the adapter is connected.

  But, when I reboot when the adapter is connected, after his stop, just power light turns on for a second or two and gets off automatically. And not even the laptop starts manually by pressing the power button (LCD is turned off when the power light comes on for 2 seconds) when the adapter remains connected.

  So what I do is to pull the plug on the adapter, then start the computer manually by pressing the power button and reconnect the plug of the adapter to the laptop starts. It works well this way. Rest everything works perfectly.

  And this problem started after the update of the BIOS. Now, I don't know how to remedy the situation I don't know if there was a bug in the last update of the bios.

  Details of the update from: http://gulf.computers.toshiba-europe.com/innovation/download_bios.jsp?service=AE

  30/07/08
  Update the BIOS
  This Bios update adds functionality to your system.
  Satellite Pro A300 Toshiba of 3, 60 - WIN

  So please help me to solve the problem.

  Thank you best regards &,.
  Manjit M.

  Hello

  Try to update the BIOS again
  In addition, access the BIOS settings and set the default parameters. Save it and try again.

  Good bye

• Cannot install After Effects CS6 for Mac running Yosemite 10.10.3. Tried to run the update, does not. Tried the update of the application Manager initialization failed. Referred to as Support Advisor, abandoned.

  Cannot install After Effects CS6 for Mac running Yosemite 10.10.3. Tried to run the update, does not. Tried the update of the application Manager initialization failed. Referred to as Support Advisor, abandoned.

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• USB-6009 DAQmx meter task stops and does not restart when you restart the VI

  I have the task of counter DAQmx which "hangs up" while troubleshooting a VI and does not restart when I restart Traoré.  See attached fragment VI.  The counter works reliably in normal operation, but some combinations of interruption and running "highlighted" causes to stop work.  It's in LabVIEW 2009.

  It will restart if I close the VI and reopen it.  However, this causes losing me my window probe laboriously built with ten

  the probes.

  Is it possible to re - initialize a DAQmx task without closing the VI?

  This significantly slows the troubleshooting.

  As an alternative, if anyone can suggest a way to preserve a probe Watch window after closing of associated VI, it would be a work around.

  Please do not take into account.

  Counteract the work of task - it's the rest of the program which is hung up.

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...

• iPad will not restart after the update iOS9.3. Should force us the reboot?

  iPad will not restart after the update iOS9.3. Should force us the reboot?

  By restart do you average will not turn on?

  There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

  Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

  You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

  http://support.Apple.com/kb/HT1414

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• MS Money 2005 - I rebooted the software, but it does not automatically download the update needed to read my existing data files

  Due to a hard drive crash, I had to reformat my hard drive,
  therefore lost my copy previous update of MS Money.
  I reloaded the software from the CD, but it does not automatically download the update needed to read my existing data files.
  Can someone help me read my old data files?

  Microsoft or anyone have made available as a patch to download?

  Hi Derek,.

  Since the problem is related to Microsoft Money, I suggest you post your question on the Forums of money from Microsoft.

  Microsoft Money Forum

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• HP pavilion ab027tx 15: Equalizer b &amp; o does not properly after the update of windows 10

  I've updated to windows 10. .and I have installed the latest driver realtek audio on my laptop from the HP website.

  The B & play 0 appears in the control panel and list of icons. But I am not able to change the mode(music/voice/movie) in the room B & O when you listen to music and watch YouTube etc .i have reinstalled the driver realtek audio, but the same problem appears. Please tell the solution for this problem

  It does not work when I use my headset

  Hi there @pavan_014.

  Thank you for visiting the Forums HP's Support and welcome! I think the problem you are having is your sound and headphones since the Windows 10 upgrade.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Although you had already uploaded/updated new drivers, I would suggest trying to uninstall all the drivers of its current:

  • Go to the Device Manager
  • Click sound, video and game controllers
  • Right-click on the audio driver
  • Click on uninstall
  • Restart your computer laptop twice
  • Try the speakers

  You can use the HP Support Assistant's drivers. Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated for Windows 10.

  Are - what you happened to try the audio Troubleshooter? It might be able to solve your problem automatically.

  You can find the great troubleshooting steps in document No. sound from speakers as well as resolution of the headphones and headset problems. This document contains several troubleshooting steps that may prove useful.

  Please follow provided the troubleshooting steps, re-post and let me know the detailed results of the troubleshooting.

  Thank you!

  Have a great day!

• Camileo P30 does not work when the 8 GB SDHC card is inserted

  Hello
  I just got a new camcorder Camileo P30.
  I also bought a card 8 GB class SDHC 6 100 'Lexar Premium' x
  And it does not work with the card inserted.

  Here are the symptoms:
  (1) when the card is not inserted I can do everything OK - take pictures and video, use the menus, it turn on and off.
  (2) when the card is inserted, the following occurs:
  2.1) I can't take pictures or video - it does not meet the pressed buttons.
  2.2) I can't access menus.
  2.3) I can't shut off again.
  2.4) I do not identify the amount of memory is available (shows only 0 recording time remaining).
  (3) I have tried different combinations of:
  3.1) Insert the card so that the camera is turned off.
  3.2) Insert the card so that the camera is turned on
  3.3) Insert the card while the device is switched on and in one of the menus.
  (4) the camera doesn't always work if I take the card again.

  During these expriments (#3), I was sometimes able to get a record time correct left (#2.4), but still #2.1 to 2.3 # were a problem.
  At one point, I was also able to "format" the card and subsequently, he showed a record very long time available (not matching only not to the size of the map) and #2.1 to 2.3 # were still in force (i.e. I couldn't use the camera or turn it off).

  Note to work around the #2.3 I took the battery.

  I was not yet looking for updated firmware, or connect it to the PC.

  Has anyone of you has met with such a problem?
  What did you do to solve it?

  Thank you.

  Hello

  Have you tried another card SDHC?
  I m not very well what is happening here, but I recommend you another card in this camcorder.
  I m P30 not owner but I have a: 30 and the camcorder reads without problems for 16 GB SDHC card. It works perfectly.