my_netstream. Play (my.flv, 23) does not

Similar Questions

• Microsoft headset - I installed Microsoft LifeChat 1.4 but when I play music the headset does not work

  I installed my microsoft lifechat 1.4 I can receive my microphone, but when I play my music, it does not work

  Hello

  ·         Never work earlier?

  Check to see if this article helps you.

  Activate the sounds in the LifeChat headset

• FLV file does not start or play

  Hello

  New brand of strobe, watched a few vids you turn everything off and downloaded the StrobeMediaPlayback_1.5.1 - full.zip.  Setup.htm to create a code... my flv was encoded with Sorenson Squeeze 4.1 using the Spark Pro codec... I copied the file StrobeMediaPlayback.swf in my file on my computer (local test) source put the flv file in there too... made sure paths have been set correctly... when I run the web page (locally) for the test, I see the player load but when I hit play I have error "we have problems with playback. Excuse us... »

  So I built my own device player using Flash MX 2004 (I know this is an old version) and put this player in the same place and my flv file will play with this drive, but not the strobe light... am I missing something?  Is it supposed to be more the files copied to the source than just StrobeMediaPlayback.swf folder?  Strobe not play flv files encoded with the Spark Pro codec... I think these are the h.263?  Any help would be great... Thank you.

  Hello

  SMP was designed to read files from a URL. If you tested it on your file system, providing the source would work as expected.

  definition in the verbose = true flashvars will give you a more detailed error message.

  My recommendation is to host both the video file and the player on a local web server and play or debug from there.

  S.

• Play File.vi sound does not work in Windows 7 x 64 Ultimate, LV2009 SP1 x 64

  Hello

  For some reason any "Play Sound File.vi' in LabVIEW 2009 SP1 x 64 won't read my files .wav on Ultimate Windows 7 x 64.  It gives this error:

  LabVIEW:  (Hex 0x12C3) The sound driver or card does not support the desired operation.
  

  The exact same code works (it will play .wav files) with LabVIEW 2009 SP1 on Windows 7 Home Premium 32 x 32 x.

  Here are the results of the test cases I've tried so far:

  Box 1: Dell Precision T3400, Ultimate in Windows 7 x 64, LabVIEW 2009 SP1 x 64 [does not]

  Box 2: Dell Optiplex 755, Ultimate in Windows 7 x 64, LabVIEW 2009 SP1 x 64 [does not]

  Box 3: Lenovo X100E Netbook, Windows 7 x 32 Home Premium, LabVIEW 2009 SP1 x 32 [works]

  The "Beep.vi", however, works on all three machines.  Audio devices on all three machines work fine when used by other non-LabVIEW applications.

  I also tried several different .wav, including those stored in C:\Windows\Media files.  None of them breed in BT on the zone 1 or zone 2.

  The user account that I use still has privileges administrator on all 3 boxes.

  All this experience?  How can I fix it?  I tried to dig into "Beep.vi" to see if I could reuse all subvis, but Beep.vi is password protected.

  Thank you

  Richard

  I got the wav files to play by calling the PlaySound method contained in C:\Windows\System32\winmm.dll.

  Had to create a library function call and research, PlaySound interface.

  The VI is attached to this message.

• Gamepad Xbox 360 plugged into USB with "Play and Charge Kit" does not work

  Hello, I have Windows 7 as OS, and I'm having some problems with my Xbox 360 controllers. When I bought the game and load to my xbox 360 controller kit, I heard that it was possible to connect to you pc to play with games for windows live. So, I started looking for drivers, and I found them in the official site of microsoft hardware. I installed it, and then I restarted my PC, I plugged it into the USB port, WIndows recognizes the material. I thought it was very good. But, even if the hadrware has been noted, it doest work. Then I discovered that 'Xbox 360 accessories 1.2' does ' t detects hardware, and it is not recognized as a game, but as a generic Hadrware material.  at this point I have gived up! I surfed the net, trying to find somethig or somemone can help me, but it was useless. Now, I hope that you will be able to solve my problem!

  PS: I already tried to change the controller, to change USB port, to change the cable, to uninstall and repeat the installation of the driver...

  I hope that I was clear and sorry for my bad English!

  Hello TheRick.

  Unfortunately, this won't work.  The Play and Charge kit connects only up to the actual battery.  Still, the controller connects more wireless.

  You would need a wired Xbox 360 controller or Xbox 360 Wireless Gaming receiver that connects to your wireless controller existing.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• in my bonus collector since the last day, keeps giving me a message: GREAT TO KEEP PLAYING PLEASR RECONNECT: it does not add the coins and .please difficulty

  There is not much else, since the last update I can't collect coins of the bonus because of the message auto collector to reconnect. I clicked and nothing happens. can you help me with this

  Hi janetgriffin,

  Thank you for your question, and I'm sorry to hear that the bonus collector does not work. Please make sure that Firefox is configured to connect to the internet, the same way your computer. These settings are in this menu:
  Firefox > Options/Preferences > advanced > network >

  The error is a common player http://service.real.com/help/faq/top5/rp_cannot_connect.html problem help please this as well. You can temporarily turn off the firewall and Antivirus as well to ensure that it is not blocking the connection.

  I hope this helps.

• Sound recording play, sound safe mode does not!

  Well, I have a Lenovo T61 and it began to show the blue screen. It won't let me boot up normally, but when I go into safe mode the Audio does not work. Is there a way I can fix this?

  Hi MoniqueHinds,
   
   
  1. What is the operating system installed on the computer?
  2. What is the exact error message you get with error blue screen of death?
  3. did you make any changes before the blue screen of death error?
  4. are you able to start your computer in normal condition?
   
   
  Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. Sound does not work in safe mode as the audio driver is not loaded. To learn more about safe mode and the drivers loaded in safe mode you can follow the links below.
  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode
   
  http://Windows.Microsoft.com/en-us/Windows7/which-drivers-get-loaded-in-safe-mode
   
   
  I suggest you re-read returns with more details on the Blue Screen of Death error, so that we can help you solve the problem with the blue screen of death error.
   
   
  If you use Windows 7 as the operating system, I suggest you follow the steps to fix the problem with the blue screen of death error.
  Resolve stop (blue screen) error in Windows 7

   

   

• His record game. I can't play the sound. troubleshhoot does not work

  Next to my changer volume, there is a small 'X '. When I go over it with my mouse, it says: "no speakers or headphones are connected ', but the speakers are integrated into my PC, so my monitor. Also, if I click it, it brings up to solve problems, but that does not work either! Any help is appreciated, I can't do that without sound on YouTube!

  Next to my changer volume, there is a small 'X '. When I go over it with my mouse, it says: "no speakers or headphones are connected ', but the speakers are integrated into my PC, so my monitor. Also, if I click it, it brings up to solve problems, but that does not work either! Any help is appreciated, I can't do that without sound on YouTube!

  Have you tried to uninstall and reinstall sound card driver? You may need to visit the manufacturer's Web site to download and install the latest sound card driver.

• Disabling "Click to Play" in all: config does not not for Acrobat Pro 10

  "I'm having a problem of disabling ' click to Play", the function that displays the gray screen inviting you to activate a plugin before proceeding further. By clicking on "Allow and remember" doesn't seem to work, because I always see the screen, even if I visit the same site.

  I set the plugins.click_to_play option to false in: config, but I still don't screen "Click to Play".

  I'm trying to view the PDF files in the browser itself * WITHOUT * the trigger for the game screen popping up everytime, which ages quite quickly. Can someone help, please?

  The plugin in question is Adobe Acrobat Pro version 10. I have the reader on your computer as well (v 11). I prefer to use the reader to view the PDF files, it is more common, but I can't make it work in Firefox, despite all the operations described in the relevant sections of the KB and the options dual control in Acrobat Pro and reader. Therefore, I'm stuck with Acrobat Pro, which is older and so the problem with the incessant "click to Play" screens.

  See if you have these two, and if you can get rid of the Acrobat one:

  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\MozillaPlugins\Adobe Acrobat

  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\MozillaPlugins\Adobe Reader

  You can always export all first before deletion in case you want to re - import later.

  Note: If anyone reads that it is a 32-bit Windows user, check under HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins instead.

• play button on Vimeo does not

  Hello

  None of my vimeo videos seem to work on my site.

  They work very well, but since the Firefox 18.0 update, the game buttons have stopped responding.
  You can view the question of the link below:

  http://www.glengranttasting.com/en-us/personaltasting.aspx#How%20To%20Run%20A%20Whisky%20Tasting

  You must identify yourself with the client code 1234

  Hello
  Just so you guys know we have found and corrected this problem.

  It was caused by the arriere-visibilite face: hidden on the slider, which was intended to prevent glitches in webkit browsers, but fortunately it was not necessary for our specific cursor.

  Once we have removed the CSS backface-visibility: hidden property play button has functioned well in Firefox on Mac 19.0.

• play taptiles now, it does not open

  I play taptiles, now, he won't play it continues to get stuck on a blank screen, displays the background for the game but not tiles

  Notawindowlover, welcome to the forum.

  I suggest to uninstall and then reinstall the game.  It sounds like a glitch has occurred.  Reinsert may solve your problem.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• Project file will not play back, and PremPro does not end without force quit.

  One of my projects seems to be broken, it will not play to wither the source window or timeline. All changes are intact but the rendered bar seems to be either red of missing on top of the timeline. All the backup automatically of the project seems to be affected, BUT other projects are ok. Also everything by opening this first project pro will not stop and instead comes up with "premerie pro has experienced a serious error...". "When you are prompted to force quit.

  
  

  What is the problem? !

  Found a solution, open a new project and import the sequence starting from there, the first cart.

• Reading FLV, source does not

  I don't know why the videos are not playing in my web application.

  I added the f4v mime type to the server

  I have triple checked the paths and watched videos online.

  URL: http://appesl.englishfreeonline.com/ videos are is assets /... check the source below

  When I clear the cache and load the userL.f4v first, he plays.

  If I try to load any video first of all it doesn't.

  Also if I load a video after the first loading userL.f4v... well they still do not play.

  Any ideas? Here is the source code:

  import flash.display.MovieClip;

  import flash.events.MouseEvent;

  Import fl.video.VideoEvent;

  Import fl.video.FLVPlayback;

  public class info CME extends MovieClip {}

  public void mcInfo() {}

  flashCards.addEventListener (MouseEvent.CLICK, maps)

  training.addEventListener (MouseEvent.CLICK, trainingL)

  user.addEventListener (MouseEvent.CLICK, wear)

  }

  private void cards(e:MouseEvent):void

  {

  Player.Stop ();

  Player.source = ' assets/flashCards.f4v ";

  Player.Play)

  }

  private void trainingL(e:MouseEvent):void

  {

  Player.Stop ();

  Player.source = ' assets/trainingL.f4v ";

  Player.Play)

  }

  private void userL(e:MouseEvent):void

  {

  Player.Stop ();

  Player.source = ' assets/userL.f4v ";

  Player.Play)

  }

  }

  all your compiled code is in your swf file.  Anyway, you attempt to load your c drive trainingL.f4v.  you have probably navigated to using the properties panel when the flvplayback component is selected.

• Record/play why my pc does not burn a cd of sound? He's going through the motions, but there's nothing on the disc when it finishes burning?

  Why my pc is not burn a cd? He's going through the motions, but there's nothing on the disc, cd, when it finishes burning. It was working ok and then just stop?

  Hello

  ·         What operating system do you use?

  ·         What application are you using to burn the CD?

  ·         What exactly you are trying to burn on the CD?

  .      There the latest changes on the computer before the show?

  Please provide us with more information about the issue so that we can help you further. During this time, I would suggest to run this Microsoft fix it to the tool and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• Its FLV AS3 does not stop

  I have a SWF with 4 scenes, in every scene, there is a FLV video. I have pimples will prevScene and nextScene and when to return back and forward, I hear the sound of an another FLV, ideas?
  
  the code for the buttons (for example) is
  
  Button1.addEventListener)
  MouseEvent.MOUSE_UP,
  {function(evt:MouseEvent):void}
  myPlayer.stop ();
  SoundMixer.stopAll ();
  prevScene();
  }
  );
  

  sounds you hear must be instantiated after executing your stopAll().