My new build computer runs like a piece of cake on fedora, but when I try to install windows 7 it restarts during installation

Similar Questions

• Get the error access denied when you try to install Windows 7-64 bit Okidata IBM-ML321 of windows update. Error reported in the newspaper like 80070005

  Can install printer drivers which are in 'standard list of printers', but when I try to install a local printer and choose update windows for the Okidata IBM-ML321 on Windows 7-64 bit driver, it errors when you try to install.

  Hi David,

  I suggest you scan the computer antivirus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  2) if you run the virus scan of the program which is infected with the virus will be deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• I bought LR6 upgrade of LR3.6 that my new camera is not compatible. I could download LR6 on my PC but when I try to install I get error messageeven after many unistalls and reinstalls: setup initialization failed. This may be due to a m

  I bought LR6 upgrade of LR3.6 that my new camera is not compatible. "I could download LR6 on my PC but when I try to install I get the error even after many unistalls and reinstalls:" setup initialization failed. This may be due to a missing file. Download Adobe Support Advisor to detect the problem". Of course, that no longer exists. Help, please... Thank you

  Hi Lilianh71023988,

  'Could not initialize installation' could indicate a corrupted download. If you haven't done so already, try the following steps:

  1. Uninstall Lightroom 6: How to manually uninstall the Lightroom
  2. Use the Adobe Cleaner tool to remove the remains of program use the Adobe Creative Cloud cleaning tool to solve installation problems
  3. Download a new copy of Lightroom 6 to install Photoshop Lightroom
  4. Try reinstalling the program.

  If, after re-downloaded, you keep getting the same error, I recommend you to review the installation log files to identify the specific error: Troubleshooting Adobe Creative Suite install problems with log files.

  Let us know if you need help.

  Best,

  Del

• When I try and install windows 7 64 bit on my new custom pc I get this 0xc0000225 error what should I do?

  I just built this system: processor intel i5 quad core 3.4ghz

  8 GB corsair memory
  EVGA gtx superclocked 660
  250 GB seagate hard drive
  Gigabyte d3h - z77
                                  
  When I tried to install windows 7 64 bit, everything was fine unitil randomly, it stopped and gave error 0xc0000225. I really need help I spent a lot of money on this system and it does not work please help!

  Try to reduce the amount of RAM installed on a unique key or 2 GB and try to install the new.

  Also:

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Error "Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "When you try to install Windows.

  How can I configure my windows 7 after restoring my laptop to the factory conditians?

  My laptop had a blue screen and I couldn't get rid of it, I went into safe mode and restore my computer to factory conditions. When the computer says "the installation program starts services" you stop and I couldn't turn it back on for 15 minutes. When I turned on and tried to contained my setup, a message keeps poping up "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "But no mader, how many times I reboot my laptop, the same message appears. What should I do? I've restored my computer several times and never had this problem.

  You should try another recovery.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

• When you try to install Windows 7, download "this computer's hardware may not supported booting from this drive.

  I have a LG laptop I want to install Windows 7 on my try to choose a hard drive it says hardware on this computer, but it may not support booting to this disk. Ensure that the drive controller is enabled in the computer's BIOS menu. Please tell me the solution of this problem.

  See the following topics:

  http://support.Microsoft.com/kb/925481

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Original title: problems with updates

  I tried to install windows updates since the store won't let me update to 8.1 otherwise, but I've been miserably lacking 4 days in a row now. Commissioning Windows Update in Control Panel or the charm of parameters found 133 available updates and informs me that they will install automatically. If I then try to install progress remains at "downloading 0 KB", after a while updates are shown as installation. When the installation is completed I'm prompted to restart my pc. After the reboot if I'm greeted by the "Failure configuring Windows updates" screen for about an hour, then I'm able to reconnect to the desktop computer. I've been searching the forums for similar problems looking for an answer and trying different solutions, such as:

  Stop the update service then renaming or deleting the folder C:\Windows\SoftwareDistribution. No positive results on this one.

  Using SFC and DISM, first came up with my system is clean, the second did find and fix corrupt elements of store, but the problem persists.

  Download the tool for troubleshooting Windows Update from Microsoft page, who reported finding and repairing problens with service, but again without success.

  Reduce the installed updates at a time, in the instance that Windows can't handle most of the many updates at the same time. I tried this and it seemed to go well, but a strange point of interest that is so annoying is that several edits I checked are installing somehow, even if it is the only example that shows the number of updates being installed before restarting. Yet I always comes to the same conclusion. Failure of Windows updates the screen. What should I do?

  Hello

  Please update us with the State of the question. We apologize for the delay in responding

  1. You have a disk to install for Windows 8?
  2. Can you please explain what did you mean by update failed?
  3. Have you an error message when the update failed?

  I propose to perform the refresh once more using the Installation of Windows 8 disc, but before to perform updating please follow the procedure below

  Step 1: Repair of drive

  One of the best ways that you can check the alteration in the hard is to run a check disk on this subject. Please follow the steps below to repair the disk using the disk check.

  1. Open This PC by hitting on any fly in the Dashboard screen, quilting Search (or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking search), recording this PC in the search box, and then tapping or clicking on This PC.
  2. Press on and hold or click the drive that you want to repairand then tap or click Properties.
  3. Tap or click the Tools tab, and then, under error-checking, tap or click check.   You may be prompted for an administrator password or to confirm your choice.
  4. Follow the instructions. You may have to restart your PC after that error checking is complete.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Step 2: command tool (DISM) deployment image Service and management.

  By running this command, we can retrieve or modify information in an image. To run the DISM command, please follow the steps below:

  1. Go to the Windows Start menu.
  2. Type cmd on the keyboard.
  3. Right-click on the program from the command prompt and choose Run as administrator.
  4. The command prompt dialog box.
  5. Type the command Dism.exe / online/cleanup-image/Restore health and press ENTER.
  6. Wait for the command to run which can take about 30 minutes.
  7. After running the command, please try to make the backup of the system.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• I am sent updates to Firefox, but when I try to install them, they run and run and never download.

  I regularly receive updates. When I click on the button to download the update, the program runs continuously without having to download. By clicking on the button "Hide" does not work.

  Hi richardelfers

  If there is a problem with the update or permit the best and safest is to download and install firefox:

  1. download a copy of the latest http://www.mozilla.org/en-US/firefox/all.html firefox

  2. Trash , install the current application of Firefox to do a cleaning.

  3. install the version you downloaded.

  Do not select to delete your personal data, your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks or other personal data.

  See also: Installation of Firefox on Mac

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• When you try to install Windows XP I deleted some unwanted partitions on my hard drive and now my computer will not start.

  original title: file system

  Finally, I tried to install a new xp on my pc, I had to remove some unwanted parttions and trying so I deleted some system files and its caused me

  problems with my laptop will not start again.

  I try to boot from a cd, but it keep posting so tat files cannot be copied. to restart and boot from the system itself is not also possible.

  I got a copy of my xp on a USB but I can't get my laptop to boot from it

  I need help badly thanks

  pc files cannot copy

  Cannot copy the Office

  Win87.em

  Win_dos-chm

  Windows.hlp

  WinHelp.exe

  WinHelp.hlp

  wininstP.chm

  WMIC.chm

  wmifltrlW.chm

  wmiscmgr.dll

  windW.chm etc.

  Sonyvaio11, xp professional

  Hello

  not all motherboards were Boot from USB active

  Make sure to set the ot of CD/DVD drive USB key to be 1st in the boot order to boot from the XP disc

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to clean install XP

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  ___________________________________________________________

  Here is the vista forums

  Try the forums xp on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Get the error "Windows cannot be installed to this disk" when you try to install Windows 7 after Ubuntu was installed on the desktop computer

  So I installed Ubuntu 12.04 on my newly built office. I didn't like, so I had windows 7. I started Windows, and choose to perform a custom, Setup since I did not have before windows. Now, here's the problem, is not letting me install on my drive. I get the message: Windows cannot be installed to this disk. the selected disk is a MBR partition table. on EFI systems, Windoos cannot be installed on GPT disks.    Is my previous installation of Ubuntu, the cause of this? How can I resolve this problem and install windows7?

  GParted allows to format the disk, and then try the installation again.

  Operating instructions GParted: 9 steps - wikiHow

  http://gparted.sourceforge.NET/LiveCD.php

• I restarted my computer, but when I try to install later he repeats to me "Please restart!" How do I get this with?

  I use Firefox 17.0 and I tried to install later. But I can't even install it because before it starts, he says "Please restart to install the OLD version! Help me! Also, I can't use the installed Firefox!

  Happy to help you. Let us know how you did. Happy holidays.

• I recently moved notebook I have all my sequential codes. But when I try to install new downloaded it tells me that the installation program could not initialize the .dmg files. Even with the PES, PS and flash player. None of my installers will initialize

  Literally what the title above says. I just can't get anything to boot. CS4, CS5, PSE 8 PSE 9. It worked just the other day when this laptop had NOTHING on this subject. but now that I have all my files migrated absolutely nothing does not yet have flash player.

  Have you checked: error: "Setup cannot initialize ' | Windows

  Failed to initialize the installation of Adobe

  Mac - installer failed to initialize. (etc.) Help! I can't install the CS6 Master Collection Suite.

  Installer [CS5.5] initialization failed. Please download Adobe Support Advisor to detect the problem.

  Setup could not initialize photoshop cc, Fixed - YouTube

  Concerning

  Stéphane

• I downloaded CS5 on my new macbook, but when I try to install it says 'install' cannot be opened because it comes from a developer that is unidentified. Help!

  The download was successful website to adobe cs5, but there is an installation error.

  'Install' cannot be opened because it comes from an unidentified developer.

  Your security preferences allowing installation of only the applications from the Mac App Store and identified the developers.

  Hi Molly,

  Please check these links and turn off the doorman.

  • OS X Mavericks: open an app from an unidentified developer
  • OS X: on Gatekeeper - Apple Support

  Thank you

  Atul Saini

• When you try to install Vista, receive the message "this computer hardware can not supported booting from this drive." Disk 0 unallocated space.

  Original title: Disk 0 space unallocated: when I tried to install Windows Vista.

  Unallocated space of disk 0: when I tried to install Windows Vista on my laptop and the screen table "Windows Installer"down I got the important message"hardware on this computer may not support booting to this disk. Make sure that the drive controller is enabled in the computer's BIOS menu "...

  Name: Disk 0 unallocated space total size 149.0 GB free space 149.0 GB Type: (empty).
  Please tell me what to do, I'm desperate. Thank you!!!

  Hi n m,

  Boot you from the DVD to start the installation, or have you started the installation in the existing version of Windows?

  I would like to know if you want to perform a new installation or an upgrade installation.

  You can not install Windows on an unallocated partition, if you install vista on brand\fresh the new hard disk, you will need to create partitions on the hard disk.

  Method 1:  Format the partition and then try to install Windows Vista.

  Important: The applications on the computer and all data will be lost when you format (New Installation) of the partition.

  Method 2: You can follow the steps mentioned in the article below

  Error message when you try to install Windows Vista on a computer that has initialized the hard drives: "this computer's hardware can not supported booting from this drive.

  http://support.Microsoft.com/kb/925481

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************