When I try and install windows 7 64 bit on my new custom pc I get this 0xc0000225 error what should I do?

Similar Questions

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• Get the error access denied when you try to install Windows 7-64 bit Okidata IBM-ML321 of windows update. Error reported in the newspaper like 80070005

  Can install printer drivers which are in 'standard list of printers', but when I try to install a local printer and choose update windows for the Okidata IBM-ML321 on Windows 7-64 bit driver, it errors when you try to install.

  Hi David,

  I suggest you scan the computer antivirus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  2) if you run the virus scan of the program which is infected with the virus will be deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• When you try to install windows 7 64 bit, he asked me to remove the disc and start over, but it does not help. Help, please.

  So I have a 32-bit windows system 7 and I'm trying to upgrade to a windows 7 64-bit system.

  I have an installation disc, and my pc should be able to handle 64-bit.

  However, when I insert the disc (yes my drive is started first in the BIOS)

  The installation program starts,

  I have chosen the language,

  Accept the terms and choose to upgrade.

  He then gives a compatibility report:

  "the computer has started using the windows installation disc remove the installation disc and restart your computer so that windows starts normally.

  When I restart my pc while the disc nothing happens and when I restart my pc with the drive the process repeats.

  I'm looking for for a long time on the internet and I can't find all the solutions that work for me.

  Please give detailed answers, all help its appreciated.

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)
  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:
  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.
  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  After the first reboot, set the BIOS to boot from the hard drive.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• I get the error code 646 when I try to install windows updates.

  I get the error code 646 when I try to install windows updates. I have Windows Vista Home Premium. I disabled my firewall and I still get the error code 646.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I get the error code 6046 when I try and install updates KB973593, KB973704, KB975960 and KB974661

  I get error code 6046 when I try and install updates KB973593, KB973704, KB975960 and KB974661 and am invited to re - download the updates (which aren't yet.) Help, please.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

  I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
  One of the installation files seems to be corrupted. HR:0 x 80070003

  Hello Amawob,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

  Original title: could not start the Service "Windows Defender" (WINDEFEND)

  When you try to install Windows Defender, I get an error message that

  "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

  How can I check which privileges I have and I need?

  I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

  Help please

  Hello

  This error message is because you have Norton installed on the computer. See the for more information section below.
  http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

  Let's try the steps and check them off below if it helps.

  Step 1: You can try to uninstall Norton and then check if the problem persists.
  Note: Reinstall Norton after verification.
  Reference: http://support.microsoft.com/kb/307895

  Step 2: Change the registry value and check.

  a. Click Start, type regedit.exe and press ENTER.
  b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
  c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
  d. enter 0, under value data, and click on the OK button.
  e. close the registry editor.
  f. restart the computer.

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Error message saying signature not valid fatal error, System log files are missing or damaged 426 error when I try to install Windows XP.

  I get an error message that I need help to solve

  I need help making past error fatal error of invalid signature, the system log files are missing or damaged 426 error when I try to install windows xp pro on the new hard drive I upgraded too.  He was the original operating sysytem who accompanies him.  I use an installation cd from microsoft windows xp with service pack 3.  Whenever I get the same message and it wasn't to restart with the cd and it install all over again, can you help me please?

  Well, you need to format the hd before xp can be loaded onto a new drive...

  If it's a microsoft retail xp cd, installation cd, boot the pc on a cd, to the xp cd menu, select install xp,.

  Okay, choose the option to format before xp begins to install, the rest is automatic. In addition, do

  of course, the old hd is unplugged, plug once xp installed, disconnect printers, etc...

• Product ID invalid when you try to install Windows XP on VMware.

  XP installation of VMware

  Hello

  I have a PC under win 7. and I am trying to Flash an old router to wireless access point for a spot of dead in my house. To cut a long story short, I need to Flash the router using a software program that does that on XP (I tried the compatibility options in Windows 7 and it does not work). Then I put on the implementation of a virtual machine using VMware and an old copy of XP, I had. However, when I try and install XP I get the error that the product id is not valid. Now, I know that the software is legitimate - it was part of a XP operating system provided with an HP laptop - so my question is how I can get through the installation? I will not buy another XP code - after all I will ever use again once I finished the flash - and for the same price, I could buy a new router!. I just want to save the Earth, a small piece of discharge potential and save myself $20!
  Any help appreciated
  M
   

  Hi MarkPinches,

  Follow the steps in the article.

  You receive an error message after you enter the product key when you try to install Windows XP

  http://support.Microsoft.com/kb/310637

  If the problem persists, contact VMware support for more help and information.

  http://www.VMware.com/support/

  For reference:

  How and when to contact Microsoft and support Customer Service

  http://support.Microsoft.com/kb/295539

• Error 0 x 80070103 when you try to install windows vista

  I have windows xp media center edition version 2002 with service pack 3, when I try to install windows vista home basic he said: I do not have enough memory for temporary files and I should free space on my drives. What exactly should I do? I don't have much on my computer to begin and I already uninstalled all unnecessary files, I could think of. Any help would be appreciated thanks.

  Hi sargent_bilko,

  Please use the forum for Support of Vista,

  What is your hard drive? Did you check how much free space on your hard drive?
  Please run the Vista Upgrade Advisor before trying to upgrade to identify your problem:

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx

  Let us know the result of Vista Upgrade Advisor, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get error 80070490 Windows updates when you try to install Windows Vista service pack 2.

  error 8007090

  I keep getting the error 80070490 update of the window when you try to install windows vista service pack 2. help Windows and support suggested that I insert the windows dvd the disk drive but I don't have a disk with my computer. I chose automatic convenience store on the microsoft support site. but I still have the same problem

  Hello

  Are you sure this is the error Code?

  And not this one?

  It is the opinion of Microsoft about the error code 80070490.

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  http://support.Microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821

     (http://support.microsoft.com/kb/947821/)

     Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  2. Try to install updates again.

  Method 2: perform a Windows repair installation

  If method 1 does not resolve this problem, you can perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  If you do not have a DVD of Microsoft Vista, you will need to borrow a DVD of Vista Microsoft from a friend or work acquantance to do a repair upgrade Installation.

  "This has occurred as soon as I updated from Windows XP"

  You have the upgrade DVD?

  Here is a tutorial on how to do it:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• error code80004002 when I try and download windows updates

  get error code 80004002 when I try and download windows updates on my windows vista 64-bit system...  Have tried windows repair and this does not help, any other ideas?

  Fix it what particularly did you try?

  http://support.Microsoft.com/kb/956708

  Error message when you try to install updates by using Microsoft Update or Windows Update Web site: «0 x 80004002»

  also

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-Error-80004002
  This link applies to Windows vista.

• 64 c the error code when you try to install windows update kb2505591

  Why do I 64 c error code when you try to install windows update kb2505591

  Hello

  The kb2505591 is for the download of Bing Bar 7.0.

  You can try the methods provided below to solve the problem and then try to download the update for Windows.

  Method 1:

  I suggest to reset the Windows Update components and check if that helps resolve the issue.

  http://support.Microsoft.com/kb/971058

   

  Method 2:

  Follow the instructions in the link below to rename software c:\windows\system32\catroot and distribution records and try to install the service pack.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  If the methods above do not help then try to download Big bar 7.0 maually starting from the link provided below and check if the problem persists.

  http://support.Microsoft.com/kb/2505591

• My new build computer runs like a piece of cake on fedora, but when I try to install windows 7 it restarts during installation

  My new build computer runs like a piece of cake on fedora, but when I try to install windows 7 it restarts during Setup after loading files? Configuration
  ZOTAC GE Force GTX 670
  PSU Antec 900 W
  Intel core i7 - 3770 k
  Card Asus P8 Z77 - Mother V PRO
  WD 2 TB hard drive

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.