My new user experience with PP5.5 (not so great)

Similar Questions

• How do I create a new user account with windows XP Home Edition after operational failure

  How do I create a new user account with windows XP Home Edition after operational failure

  Hi andyprice,
   
  -What is the operational flaw that you speak?
  -You receive an error message when trying to create a new user account?
   
  Write us with more information pertaining to the matter to help us help you better.
   
  In the meantime, you can refer to this article:
  How to create and configure user accounts in Windows XP

• User account problems - create a new user profile with the error message: the user profile service service doesn't have the opening of session/user cannot load profile

  I'm very used to make new user accounts and he have done many times, but this is the first time I had trouble with it. I'm just trying to create another user on my computer, but every time I try to create an and log on to it, I get the message: the user profile service service has no opening session/user profile cannot be loaded. I tried to create this profile as a standard user, administrator, and a customer. Does anyone know what is the problem?

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I created a new user account, but it does not appear to connect to it. (Vista Home Premium)

  I created a new user account for my admin account.  I tried to create a standard account and I tried to change to an administrator account.  The only place that this account presents itself is managing it new user accounts in Control Panel.  If I try to change user or sign out and then sign back, it never gives me the possibility to sign until the new user account that I created.

  I read another post that said to try to restart in safe mode, what I tried without success.

  I also don't get no error messages, so I was not trying to fix anything, given that I'm not sure it's broken and I don't want to do something worse.  I only use this computer and Vista for a few days now, so I hope it's something simple I'm missing because I am not yet familiar with the operating system.

  Thanks for any help you can offer.

  AFBurris

  Hello

  Logon as administrator

  You must open a command prompt at the entry of the order.

  Start - type in the search-> CMD box find top - make a right click on - RUN AS ADMIN

  Run CheckDisk and continue as needed.

  Good luck. Rob - bicycle - Mark Twain said it is good.

• Create a new user in Vista, but does not appear under c:\Users[user-name]\Music\iTunes\iTunes /.

  I tried to add a new user of Vista. The name and icon are created in the login screen, but when I tried to access the new user account, I received the message "user profile service logon failedthe. User profile cannot be loaded.
  I read the responses on the copy files to the user overall, but when I looked in the c drive, the new username has not been added. What should I do now?

  Hello

  The problem is probably damaged the ADMIN account, you were when you created the user account.

  Log on as an ADMINISTRATOR or use the HAA below and REMOVE the user account that you created. Then move forward
  as if your ADMIN account (the one you used to make this account user) has been corrupted. Once you are sure
  It is OK then DISABLE the HAA - login to your ADMIN account and make a different for USER account
  see if everything is OK.

  Try these to erase corruption and missing/damaged file system repair or replacement.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then do-, use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK
  then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the
  same for other accounts that may be difficult. Then if necessary you can also reset your password
  in the accounts. Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Mouse Microsoft and new mouse came with the PC not communicating is not with the PC.

  Original title: Microsoft Mouse

  My mouse is not always communicate with my PC.   I have to click several times.   For example, clicking as Facebook takes a few clicks.    The CD that came with the mouse is for Intellpoint 4.0 and Windows 8 does not work it says there is a compatibility issue.    Even if I use the new mouse comes with the new computer, it seems to be communication problems.

  Thank you for the response, I really appreciate it.

  I went back to the HP comes with my new computer mouse and now it works fine.   Guess the little Gremlin take the road.    I like better the Microsoft mouse, but oh, well.

  The model number on the back of the Microsoft mouse is: P/N X 802382-002 PID 56180-523-0661404 - 2.    It worked when I had Windows XP, but does not seem to be compatible with Windows 8.

  I wasn't getting any error messages with the new HP mouse, everything seemed to work when he wanted to.   But now that I switched to it, it works fine.

• New user experience

  New user here...

  It is absolutely the WORST user experience to join this cloud disaster I've ever known.

  Still don't know where is my application, if it's been - downloaded or WTF?

  There is no indication of the download procedure that I can find... nada.

  While I can find garbage Testware junk clogging my applications folder - no sign of the app download or pays off.

  Can someone tell me where download - if there is such a thing, will?

  Without hope.

  I won't be here any longer I need to be.

  OSX Yosemite

  Download the creative cloud desktop application which is your launching pad for individual applications.

  After installation and connection go to the applications tab, then click on next to each application that you want to install.

  Download Adobe Creative cloud apps | Free trial of Adobe Creative Cloud

• New user frustrated with slices!

  Hello everyone, I am a new user and having a problem with the slices.  I was sent a file .psd with slices already in the file.  A slice should be expanded - no problem.  BUT when I save for web and download the new .jpg that have been generated the positioning is all messed up with the slice, I changed, as well as with the other slices.

  What I am doing wrong? See my stupid screen captures below. The staggered square is my "adjusted slice.

  

  Yep, slices exported from Photoshop are simple images, it's the css/html/etc. of your site to get them in the correct position

• New user of creative cloud can not be implemented

  I just bought a license of creative cloud over the use of my hotmail as a connection account, but I can't seem to set up applications. The connection doesn't let me change my email to my ID I used to test a software.

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -If you have more than one email, but of course you use linked to your subscription

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  If the above does not work, you will need to uninstall and run the vacuum and installation using your account paying

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  As you have learned, using two IDS different Adobe on the same is confusing

• New logon user - new user account is created, but it does not work

  I have Windows Vista Home Basic Edition.  My computer has suddenly developed a little problem on user account and the guest account.  Every time a new user is created in the user accounts in the Control Panel, or the guest account has been enabled, users cannot open a session.  Any attempt to these users or comments of logon is greeted with "service user profile Service does not have the logon - user profile cannot be loaded."  When the new user is removed, and is used to save all the files, there is no file to be saved.

  The problem is not a corrupt profile or SID which should be deleted or renamed and so on.  The problem is that when I create a new user through user accounts in the Control Panel, no profile or anything else seems to be created with it. The computer shows absolutely nothing more than the new user in the title of the user accounts and on the logon screen.  The new user is not in the settings under the my computer properties. There is no document (desktop and so on) for the new user in Windows Explorer; There is no SID for the new user.  It seems that there is no profile or anything for the new user.  System Restore could not help, because the incident that wiped out all system restore points also annihilated profiles. There is no '.bak' file in the registry for all users.

  I have the same problem with the guest account.  There is nothing in the browser to indicate the existence of a guest profile. It doesn't seem to be a SID for the customer.  The guest account cannot be used because any attempt to logon as a guest is greeted with "service user profile Service does not have the logon - user profile cannot be loaded."

  Yes, please is there someone who can help us solve the problem of not being able to effectively create new users and have a guest account. Thank you.

  Hello temp8127,

  Thank you for your answer!
   
  You can do a 'repair Start Up' but will have installation disc.  If you perform a new installation, then Yes you will need to copy your personal files on a device.  Please let us know status.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged, that might prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx#ex
  NoteIf your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions. Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Add a new user of Runtime

  I googled and was looking for a documentation with a few images/image of how to add a new user to tide but some not found. I was wondering if any of you can give me a screenshot of how to add a new user to tide. my access does not add/edit a runtime user.

  Thank you very much
  Warren

  Hey Warren,

  You should communicate with a person with security privileges to grant you access to adding/changing user tide

  Administration - users.jpg

  

  Once granted, you should then be able to add users - start clicking on the box with the Green more on top to add a new user.

  User/group name = user/group name

  Full name = family name, first name

  Domain = AD, empty if Unix, or domain name

  Then select security policy: Super users, Runtime user only or other

  Users of runtime tab to specify which TIME users access the user/group, the agent tab to specify which users DURATION agent has access. Another tab allows you to specify the telephone number, electronic address of the group/user. If the runtime user needs to connect to a Windows agent, then the windows / FTP password field must be filled in the password tab. And if the runtime user needs to connect to a Unix agent, then the password fields can be left white.

  user - definition.jpg

  

  Just give it a try.

  ARO

  The Derrick

• Program is not associated with a file - new user on XP

  I just created a new user account on my computer for my mother, and I'm not able to open Firefox or one of the Control Panel options (display, etc.). It works fine on my account, and we two system administrators. It is said: "the program is not associated to a file" and asks me to change it in 'Folder Options '. I don't want to start messing around with it until I know what I'm doing!

  Why isn't he working on a new user account and mine only? Very confused. Any help is greatly appreciated!

  Please see:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/associate_file_with_program.mspx?mfr=true

• I set up the new user on my MacBook Pro with the parental control, and I want to allow access to Word, Excel, PowerPoint for Mac.  I have those checked in the dialog box list, but they may not appear in its applications. Am I missing something?

  I set up a 'user' for my son and use parental controls.  I want to him to have access to Word for Mac, and it appears in the list of applications I can check to allow use for.  However, when we opened a session under his username, these applications do not seem to be anywhere.  When you configure new users, applications such as Word for Mac or the available Pages on users?  I can't find any information to help in this regard.  I don't know if I'm missing something under user put up, or parental controls, or both.  Any help would be greatly appreciated!

  These requests should be made available, provided you installed then in the folder/applications, not in a private folder ~/Applications for a specific user.

• What to do with the old user profile after you have created a new user profile

  original title: new user profile

  I was told my user profile is corrupted and create a new one, if I do this is it recommended to give up and delete the old? Or simply use the new profile for the intended use of the new?

  Hello

  They are similar, if not the same, as your question then use these methods to correct problems
  with the account or migrate to another (explained in the last link however you please, don't skip the)
  other measures to start).

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Retrieve the user profile for a new user after user profile Service failed and could not be loaded

  I use Windows Vista Home Premium operating system.

  I wasn't able to log onto my user;  I searched online for an answer and advise him to create another user - I had 'Admin' status with the original user.

  I followed the following instructions:

  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&CS=19&docid=39CC797DE6882CB6E040A68F5B285C29&l=en&s=DHS

  According to these instructions, I've logged on the account current and open a session on the new user account.  However, all my documents, pictures, music, files, office, Microsoft Office Suite, Microsoft Outlook Email, etc. have disappeared!

  I not created it of new files or documents under the new user in the fear that it crushes everything and help restore everything back to its original state.

  When I performed a search of the system / "C: drive", none of the documents or files have been found.

  How to restore these things, especially my photos?  Or, how to restore the original user?

  Any help you give me for this problem will be greatly appreciated.

  original message: error message: "could not load user profile and user profile Service failed". Made a function to create a new user, but all my files, pictures, music, desktop icons and other stuff are GONE AND I can't FIND them ANYWHERE!

  Hello

  Your data and files are still there in the C:\Users\Your user name where C: is the drive where
  user profiles are stored.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google
  Earth) has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with
  a temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.