My newly created model swatch will not be displayed in the swatch Panel

Similar Questions

• I reinstalled Vista on a new hard drive and after installing the drivers Bluetooth, the icon will not be displayed in the control panel

  A few weeks ago my drive hard out crapped on me and I bought a new one. I installed Vista on it and thought that I installed all the drivers. Yesterday, I had to use my bluetooth and noticed that it has not been installed. After knowing that I need a patch for it, I was able to connect my phone to my computer. But now the icon is not in the control panel so that I could easily adjust settings or view paired devices. I can only adjust the settings of the icon in the bottom left of the taskbar. Whenever I try to view paired devices I get the icon of waiting and then nothing happens.

  Macuahuitl salvation,

  Ø what service pack is installed on your computer?

  If you don't have SP2 on your computer, you may not be able to see the icon in the control panel. Try to install SP2 on your computer and check the status.

  OR

  You can uninstall the device blue tooth from the Device Manager and restart the computer that will install the generic drivers, then check if the icon is listed in Control Panel.

  Please post back the result.

  Bindu S - Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Distiller 4.0 will not be displayed in the topic of my printer (XP)

  Hello

  This isn't the right forum, but I couldn't find one that applied because I use XP and my system and SW is old but still works fine.

  I was deleting unnecessary files and deleted adobe pagemaker 6.5 which unbeknowst me deleted Adobe Distiller 4.0 that came with it.

  I love Adobe Distiller 4.0 because I can make a .pdf of what either.  I often use it to make a PDF on a Word, Excel, and even Web pages.

  I reloaded it, but it will not be displayed in the printers section.  Basically, I go to print something and choose the option to distil instead of my printer and it would create the .pdf.

  I was wondering if someone could help.  I don't really like to download any free .pdf decision-makers because I really liked how distillation works.

  Thank you.

  Paula

  To clarify a bit for you (I don't know which Acrobat Distiller 4 was designed for, but probably 4 or 5). At that time, there were 2 distillers that caused confusion. One was the printer driver that you are talking about and the other was in the program. The print driver was actually Setup to run Distiller in the background, where the name of the driver. In current versions, the driver was renamed the Adobe PDF printer. This may have been distributed as part of package PM that you had, but I don't think he was probably part of the packaging itself, but an add on. You should seek an additional part of the distribution to install. In addition, you also probably have Acrobat Distiller installed program and be available in another program in your system.

  When properly installed, you should have, the pilot program of printing and AcroTray.exe running in the background. (Listed under Acrobat Assistant a few announcements at the beginning of the program) is a program that runs in the background to allow the print driver send print file (.ps file) to send to distill the PDF creation to complete. All three should be there. You can check if you have an Acro... or such driver in the System32 folder. That would be your printer driver is needed.

• iPhone will not be displayed in the finder

  I'm trying to move some of the photos from my phone to a file on my computer and my phone will not be displayed in the tab "currencies" in the finder. It's an iPhone 6 and it is connected through the USB port. I know this isn't an error connection because when I plug it in it costs and is trying to import my photos in the section 'photos' from my computer. I went into the settings in the finder and all turned on and it will not always be displayed. Why is this?

  Because Apple has decided that OS X is smarter than you and me. They removed this option on the latest versions of Mac OS X (my devices do not appear more, grrrr...). Try instead to use Image Capture and import or remove photos from there.

• Before and after Image Slider widget will not be displayed in the lightbox display composition

  So my project involves a major project gallery page containing several compositions display lightbox that trigger when click.

  For some reason any when I add the widget before/after Image Slider Muse - Themes in the lightbox, the widget will not be displayed on the preview or Chrome.
  Please help me and thank you.

  You will need to contact the Support of the Muse-themes to see if it is compatible for this purpose or if it is possible.

• Themes from browser will not be displayed in the iPhone app

  I created a few themes for a project in color.adobe.com (signed on my account) and went in my iPhone application (also signed on the same account) and attempted to access topics in the tapped app sign, creative cloud, 'my library '. "My library" has old themes, but the new will not be displayed even after dragging down to update. I tried to 'release' themes, but that does not work.

  In fact, now I notice only three of the seven themes of the mobile library are appearing in the browser. Y at - it a setting to synchronize? I am very confused.

  EDIT:

  OK, so apparently they were saved in "my themes. Which begs the question, what is 'my library'? Is it a vestige of the front changed spelling of Kuler Color and deleted everything? How can I save my themes just in folders and not to attempt to navigate the labyrinth of libraries, topics, files and some other subsections of the themes repeated I have? I'd like to organize all my themes and sync between all my devices, but... I am so baffled by all this.

  The color.adobe.com undergoes a lot of changes to manage the themes of color in a more meaningful way.

  Once this is done, the themes in the web and mobile applications will be synchronized.

  HTH,

  Vivek

• My programs on the creative cloud will not be displayed in the extensions Manager.

  Hi I am trying to install an extension for Flash, but it will not be displayed in my extensions Manager and will be one of my other programs.

  I try to install the image key Caddy Pro extension and it says to go to Windows-> Extensions-> keyframe Caddy, but I couldn't find where it says to install it manually with the extensions Manager.

  Here is a picture of my extensions Manager:

  

  And this is a picture of my creative cloud:

  

  Is there a way to make my programs appear?

  Thank you, Christian

  Dear Christian

  It should not be used today. Please see this link: Adobe Exchange

• After the reset of all plug-ins has recently installed the plugin no longer works and will not reinstall. It will not be displayed in the modules arrived saying that he installed

  I recently had to reset my plugins by using 12 Firefox in safe mode to get rid an extension/add-on causes a redirection problem. All was well, except for a plugin I need is no longer works. It is called 'missing-e' and is for Tumblr.

  I tried put it back at least 5 times, according to their instructions and am now here, after they said it was a browser issue. I do I get invited to install on firefox, I install, I get the message that it has been installed correctly - but then it never appears in the Extensions or Plugins area under modules area (even if nothing never appears in the Extensions). And the features, it allows tumblr are not enabled.

  The 'missing-e' people sent me here say they believe that it is a browser problem.

  -> Create a new profile to check if your profile is causing problems, as described in this article-> Basic - a new profile troubleshooting

  • Now, launch Firefox with the new profile.

  -> IF this new profile works, then you can retrieve your history, passwords, bookmarks, etc. from the old profile, as described in this article-> recovery of data from an old profile

  Check and tell if its working.

• CDAQ-9139 StandAlone will not be displayed in the MAX Host computer using Ethernet cable

  cDAQ-9139 will not appear in computer Max Host. Portable time controller and host running NOR-DAQmx worm 9.6. Can test both directions and cDAQ-9139 appears in the browser on the host computer which is connected to the cDAQ-9139 via cable directly thru cable OR network Ethernet. Host a no anti-virus and firewall is set to off.

  Ah, thank you, sfrosty.  I think I understand your Setup now.  You are running Windows 7 on the computer laptop and WES7 on the cDAQ-9139.

  In this case, you must program your application on or deploy an executable compiled directly on the cDAQ-9139.  There is no way to use the laptop to program for and deploy a LabVIEW application to the cDAQ-9139 system.  Instead, you may want to use remote desktop to access the system of cDAQ-9139 directly, or you could fix a computer, keyboard and mouse for the cDAQ-9139 screen and use it as an onboard computer.

• Aspire VN7 - 791G: SSD will not be displayed in the BIOS

  Hello

  I bought this SSD for my VN7 - 791G https://www.amazon.fr/gp/product/B016DR1MBE/

  But it does not appear in the BIOS.

  Could you tell me if I bought the right one?

  Thank you

  Mickael.

  Hello

  791G does not support the is or looks like. As other people have said on this forum that the SSD will not work because is a SSD is. You need to buy one that is compatible SATA like this for example: https://www.amazon.fr/Samsung-Evo-SATA-250GB-MZ-N5E250BW/dp/B00TGIVZTW/ref=sr_1_1?s=computers&ie=UTF...

• Smartphone Ringtones blackBerry will not be displayed on the device, but are on my card.

  I put mp3 ringtones on my 9530 via Media Manager in Desktop Manager 5.  I did several battery grips and the tones I put on it will not show up in my ringtones.  I put them on the map of support and no device.  I tried a second time and two of each tone appear in the Media Manager, but not on the device.  I had this happen before, but usually a battery pull fixes the device.  Help please.

  Hello

  Go to the hidden file /ringtones show and remove the BBTHMBS. DAT file it as an index to theBlackberry file.

  Traction battery, let the device reindex and see if they appear.

  Thank you

  Bifocals

  No data will be lost when you do the following: remove the battery while the device is activated.
  Remplacer replace after one minute, let the device reboot 1-3 min, see if the problem is corrected.

• My big Hard Drive Partition will not be displayed in the Defragmenter

  So, it's weird, but when I start my derangementer disc, it will not show my 'c' drive  I have 2 drives, a 'C' drive and a drive to "D".  D is just for backup, while C is for all program/system files.  Then, of course, C must defraged for the computer normally elapse.  Does anyone know a good work around or if I can re - install disk from somewhere Defragmenter (please include the link to all sites if you have a method of re-installation). Also, I tried planning as a task and C will not always be displayed.

  Hi DanSiroky,

  Windows that reports using its built-in algorithms and these standards, drives
  do not defragment. However, there are other commands to change how the Defragmenter
  reorganizes the files on the disk. 3rd party tools can also be used for added functionality and/or
  different methods for the arrangement of the file.

  Take a look at the links with a similar question.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Disk-Deframenter-not-working-opening-in-Windows-7/90ff4b35-8086-4A80-bc48-0d8e4fc6d758

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-defrag-system-shows-5-fragmented/7101a9ee-F163-4176-8F19-85b7d6e48ce4

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/defragment-program-does-not-show-my-c-drive/304a2323-5771-4545-94c4-18982bd0f81e

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/how-to-defragment-disks-in-Windows-7/949c847b-b1fb-445C-8445-8734ef91f17f

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/c-drive-does-not-appear-in-Disk-Defragmenter-after/4a121b3e-530b-4f4a-a6d1-66235cb1301f

• The effects will not be displayed on the Rectangle

  I work with Illustrator cs4. I'm doing a flyer to be printed and saved in PDF format. I drew two rectangles with the Rectangle tool in the context of the simple design. I have their color and then applied the effect water effect paper > Photoshop - Sketch effects. My boss would like rectangles of a different color. When I change the color, the effect is no visible solitaire, except on the edge of the forms. The effect still appears in the appearance, under Fill Panel, however. When I change the color on the back, the effect is once again visible. I can add the effect to all rectangles drawn in this color. All rectangles drawn in other colors will not display the effect more often at the edge of the form. What happens in the world, have I done to make this happen?

  In the options of paper water decrease the setting of the brightness to about 46.

  That should cure your problem with the Green object.

• Is it possible to create a page that will not be displayed in the menu bar?

  I would like to create a page that my visitors will be sent to only after submitting a form. I want this page to be unique and not available through the navigation bar. Whenever I have create a page in the plan view it appears so in the menu bar or in one of my submenus when I create a subpage. Is it possible to have a page that is "invisible" to the menu bar?

  Thank you.

  Under the PLAN form, do a right click on the page you want to exclude from your list of menu, go to the Options Menu and select exclude Page of Menus.

• Store shared data will not be displayed in the laboratory Manager

  I have a shared data store that is fully recognized by both my ESXi hosts in pointing that client vSphere vCenter Server. I can browse the data store, download files, delete files, but not even opinion in Lab Manager. I tried to remove and re-add the data several times store. using a different initial host each time. The data store is picked up again by the two hosts and its status shows as usual in the vSphere Client. No matter what I do well, I can't make it appear in the laboratory Manager. Does anyone know where I could go wrong?

  Thanks for your help,

  will be

  You don't want to say that in the resources tab Datstores, you do not see this at all shared data store? You are in global org global org or not? What version of LM do you use?

  If you are in an organization overall, newly added data store should appear immediately. But if non-global organization, go to the Organization-> properties-> data warehouses and add this new data store.

  MoHA-