My big Hard Drive Partition will not be displayed in the Defragmenter

Similar Questions

• Distiller 4.0 will not be displayed in the topic of my printer (XP)

  Hello

  This isn't the right forum, but I couldn't find one that applied because I use XP and my system and SW is old but still works fine.

  I was deleting unnecessary files and deleted adobe pagemaker 6.5 which unbeknowst me deleted Adobe Distiller 4.0 that came with it.

  I love Adobe Distiller 4.0 because I can make a .pdf of what either.  I often use it to make a PDF on a Word, Excel, and even Web pages.

  I reloaded it, but it will not be displayed in the printers section.  Basically, I go to print something and choose the option to distil instead of my printer and it would create the .pdf.

  I was wondering if someone could help.  I don't really like to download any free .pdf decision-makers because I really liked how distillation works.

  Thank you.

  Paula

  To clarify a bit for you (I don't know which Acrobat Distiller 4 was designed for, but probably 4 or 5). At that time, there were 2 distillers that caused confusion. One was the printer driver that you are talking about and the other was in the program. The print driver was actually Setup to run Distiller in the background, where the name of the driver. In current versions, the driver was renamed the Adobe PDF printer. This may have been distributed as part of package PM that you had, but I don't think he was probably part of the packaging itself, but an add on. You should seek an additional part of the distribution to install. In addition, you also probably have Acrobat Distiller installed program and be available in another program in your system.

  When properly installed, you should have, the pilot program of printing and AcroTray.exe running in the background. (Listed under Acrobat Assistant a few announcements at the beginning of the program) is a program that runs in the background to allow the print driver send print file (.ps file) to send to distill the PDF creation to complete. All three should be there. You can check if you have an Acro... or such driver in the System32 folder. That would be your printer driver is needed.

• iPhone will not be displayed in the finder

  I'm trying to move some of the photos from my phone to a file on my computer and my phone will not be displayed in the tab "currencies" in the finder. It's an iPhone 6 and it is connected through the USB port. I know this isn't an error connection because when I plug it in it costs and is trying to import my photos in the section 'photos' from my computer. I went into the settings in the finder and all turned on and it will not always be displayed. Why is this?

  Because Apple has decided that OS X is smarter than you and me. They removed this option on the latest versions of Mac OS X (my devices do not appear more, grrrr...). Try instead to use Image Capture and import or remove photos from there.

• Before and after Image Slider widget will not be displayed in the lightbox display composition

  So my project involves a major project gallery page containing several compositions display lightbox that trigger when click.

  For some reason any when I add the widget before/after Image Slider Muse - Themes in the lightbox, the widget will not be displayed on the preview or Chrome.
  Please help me and thank you.

  You will need to contact the Support of the Muse-themes to see if it is compatible for this purpose or if it is possible.

• Downloaded Firefox and it will work in mode dmg but will not be displayed in the application folder, even if I hang out there.

  It will run fine (but slow) until I got disabling my computer. When I turn it back on, I need to click on the disc image as if it had not been installed.

  Make sure that Firefox is installed correctly.

  Open the Firefox disk image file and drag the Firefox program into the Applications folder on your hard drive.
  Do not double-click the Firefox to run from the disk image, but instead, drag it out of the DMG file.

  • http://KB.mozillazine.org/Installing_Firefox#Mac_os_x
  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac

• My newly created model swatch will not be displayed in the swatch Panel

  I created a model of plaid and dragged to the swatch group. When I tested, I realized there is some error so I deleted the swatch in the swatch Panel, then edited my original (created a bounding box with no fill, no stroke and sent to the rear). When I try to drag the new model highlight in the swatch Panel, this time that it will not be displayed; But if I create a new shade of single color it will be. Help!

  I had the same problem, but the answer by Monika helped me to understand the problem: I divorced from all elements in the model, then checked each one in the appearance Panel. I discovered that I had inadvertently forms filled with a pattern. When I deleted all those unwanted models of each shape and banded everything, I could record the reason as a sample.

• My programs on the creative cloud will not be displayed in the extensions Manager.

  Hi I am trying to install an extension for Flash, but it will not be displayed in my extensions Manager and will be one of my other programs.

  I try to install the image key Caddy Pro extension and it says to go to Windows-> Extensions-> keyframe Caddy, but I couldn't find where it says to install it manually with the extensions Manager.

  Here is a picture of my extensions Manager:

  

  And this is a picture of my creative cloud:

  

  Is there a way to make my programs appear?

  Thank you, Christian

  Dear Christian

  It should not be used today. Please see this link: Adobe Exchange

• Themes from browser will not be displayed in the iPhone app

  I created a few themes for a project in color.adobe.com (signed on my account) and went in my iPhone application (also signed on the same account) and attempted to access topics in the tapped app sign, creative cloud, 'my library '. "My library" has old themes, but the new will not be displayed even after dragging down to update. I tried to 'release' themes, but that does not work.

  In fact, now I notice only three of the seven themes of the mobile library are appearing in the browser. Y at - it a setting to synchronize? I am very confused.

  EDIT:

  OK, so apparently they were saved in "my themes. Which begs the question, what is 'my library'? Is it a vestige of the front changed spelling of Kuler Color and deleted everything? How can I save my themes just in folders and not to attempt to navigate the labyrinth of libraries, topics, files and some other subsections of the themes repeated I have? I'd like to organize all my themes and sync between all my devices, but... I am so baffled by all this.

  The color.adobe.com undergoes a lot of changes to manage the themes of color in a more meaningful way.

  Once this is done, the themes in the web and mobile applications will be synchronized.

  HTH,

  Vivek

• Re: Satellite A40 - hard drive error - will not start

  My friend bought this laptop in April 2007 and has been very happy with it until about a month when he stopped startup in windows xp.

  At the start, she now gets the message

  "PXE - E61 media test failure - check the cable for.
  "PXE - M0F outgoing intel boot agent"
  "Insert system disk in drive."
  "Press a key when you are ready.

  and then the laptop does not start in windows.

  I thought that the hard drive can have detached, so I took it out and he handed in a State, but in vain.

  I also tried to reinstall with the recovery CD but get the following error message
  status «»
  GDISK (E) no such fixed disk 1 "

  It is followed by * ERROR *.
  Error number 11030
  invalid message destination drive
  X;

  I ran a Toshiba (or he could have Hitachi) utility disk that I burned on a cd and went up on the audit boot.

  It said there are problems on Toshiba MK4025GAS, which is the hard drive. details coincide with what it actually says on the disc.

  The BIOS sees the drive start on as he is listed as the master, with the cd as the secondary drive.
  Therefore, is it true that the drive is broken. If so - can it be repaired or is there another solution.

  I tried Googling the error message and there are conflicting messages on this issue, so your help would be very appreciated.
  It seems crazy that the reader can break after only 18 months - was there a defective batch?

  If that's the case Toshiba offers a replacement or it will cost a lot?

  Thank you

  Nashy

  Post edited by: Nashy - sorry - it was bought in 2007 is NOT 2006

  In your case, the HARD drive is certainly defective and you need to replace. Satellite A40 is pretty old laptop without guarantee valid and there is no replacement from Toshiba.

  Just buy a new HARD drive. Hard drives for this good old classic are not more expensive.

• External hard drive will not be displayed in the PC

  I lifestudio HDD but I find it difficult to use because it does not appear in my computer and stores just anything I add to my PC.

  Why not show it?.

  How section of the hard drive?

  How can I move windows hard disk media player?

  I lifestudio HDD but I find it difficult to use because it does not appear in my computer and stores just anything I add to my PC.

  Why not show it?.

  How section of the hard drive?

  How can I move windows hard disk media player?

  Questions in order...

  The player support must come from the manufacturer of the drive. It appears in disk management at all?

  You would be partition. Also, using Disk Manager.

  You would not actually move the program to the external drive - do you hear your music?

• my hard drive cloning will not affect the computer in the new OS?

  I currently have a Gateway laptop that is running Windows Vista. The hard drive in the new ASUS that works under Windows 7 I just bought cloning affect or replace 7 with VISTA?

  Hello

  Yes, it will affect it

  It will not work for many reasons

  Your Gateway vista is an OEM license and is linked to the original machine on which it is installed

  It is not transferable

  even if it's a retail license, which is not the case, it would not start as gateway motherboard drivers are installed on the old hard drive

  and above all, it will not activate because it is only an OEM license tied to the Gateway Laptop

• hard drive partition does not open and his FIRST in format

  My hard drive works fine in my computer except a partition that I can not open and it is in RAW format.

  When I connect this hard to another computer, you try to transfer data, it appears as a single unit without a score.

  It would seem that the reader doesn't have

• My hard drive will not be displayed in the Finder, please help!

  I tried several options to try to solve my problem, but it is not good. I have an external hard drive Seagate 2 to. I used it for about 6 months, but one day it just does not appear in the Finder more. I checked in disk utility and it shows up there, but it is labeled as "Uninitialized 2 TB Windows NT specifien". It seems strange, that it now says Windows when I used it fine on my Mac in the past. It won't let me hit mount either. Please help me.

  Thank you.

  Did you have the Seagate utilities or any installed third-party NTFS software? The drive has never been formatted to support OS X?

  Connect the external drive and OS X Terminal, after the release of

  diskutil list

• New hard drive installation, will not register windows, uses too much of.

  Hello

  Recently, I upgraded my hard drive to an ssd, when I reinstalled windows that it would not activate to saying that it had been used on too many appliances. I bought a friend's computer.

  My main question is, is there a way around this without buying a new product key, windows 7 professional sound. Since its still the same machine it is used on and not another computer?

  Thanks for any help

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Seagate external HARD drive expansion will not identify Windows 7 x 64. OK in a first time and fine on Vista x 86.

  Recently installed Windows 7 Home Premium x 64 Vista Home Premium x 86. Under Vista, everything was fine. Less than 7, my Seagate expansion (1.5 TB) hard drive initially was recognized (I have iTunes library I can't play to prove :)) after a few days using 7, however, I lost the external HARD drive. I get the error message is "software device driver is not properly installed." In Device Mgr, it says it's an "unknown device" with the yellow! triangle. "Windows has stopped this device because it has reported problems. (Code 43) "appears in the details of the device. No updated drivers are available. Windows updates are up to date, nothing helps. Restart, reinstall, restore driver, deactivation, nothing works. Tried to update my BIOS, but it is already the latest version of Dell. Trying any other Dell Update, what it offers is the Download Manager, but not actual updates I select. I'm not allowed to use this player all of a sudden, after that it worked fine for a few days!

  Specific features of the system are as follows:

  Name of the operating system Microsoft Windows 7 Home Premium
  Version 6.1.7600 Build 7600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  System name PHIL-PC
  System manufacturer Dell Inc.
  Inspiron 530 s model system
  System Type x 64-based PC
  Processor Intel (r) Pentium (r) Dual CPU E2180 @ 2.00 GHz, 2000 Mhz, 2 Lossnay, 2 logical processors
  BIOS Version/Date Dell Inc. 1.0.18, 24/02/2009
  SMBIOS 2.5 version
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume3
  Hardware Abstraction Layer Version = "6.1.7600.16385".
  Physical memory (RAM) installed 4.00 GB
  Total physical memory 4.00 GB
  2.54 GB available physical memory

  Thanks in advance for any helpful info!

  All this occurred within three days of using Windows 7 x 64, so I don't think there is a previous restore point to go back to. However, I would not I install updates to be rendered unusable and allow my system, and their insecurity. And, as stated in my original post, I have gone through the drivers to uninstall or disable normal, remove, reinstall, etc. etc. without help.

  An update my original post, I finally got the unit of work, although not as fast as it was in Vista x 86. I did back up the device to a laptop from Vista Home Premium I have, let it load the drivers it needs, and then after reconnection to 7, it has been working well, but overall slowly in read/write functions and clicking on a lot more than he did primarily when operating. What I went through get this thing to work, I think that the currently loaded driver is for a 32 bit OS, and there is no update (again) for 64-bit. I leave it alone, because it is functional, and if it is not recognized after the next set of Windows updates, I guess I have to restore to a previous image.

  Dell doesn't seem to have anything for her, and Seagate plans explicitly on their site that they don't provide drivers for this HARD drive while referring to Microsoft or the manufacturer of the equipment for drivers.