My NEX - L 6 freezes after I turn it on, then press the film. Need to remove the battery.
I have the NEX-6 with a 16-50 lens and it freezes when I turn it on then press the movie button. If I wait longer before pressing the button, it seems to be OK, but if not, the goal remains unretracted and start and stop again does not help. I have to remove the battery and restart the device. It took me a while to understand why it was freezing upwards, and there is at least one situation where I seen it happen on a regular basis. Does anyone else have this problem? I hope an update of the firmware wouldn't be now, but have not seen.
No when I turn it on, it gets stuck, like a windows pc stuck with the sandclock or the circle around truning
Its either a bug software or a problem with the 18-200mm lens, it doen ot havppen with the 16-50mm lens.
Also, sometimes he will, but refuses to focus, as the engine focum does not report you to turn.
Tags: Sony Products
Similar Questions
-
Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?
Hello
The best way to save battery life is to go into the settings and turn off Apps Refresh
I now get 3 / 4 hours of battery life more.
You cannot return to a previous ios 9.1
See you soon
Brian
PS
If you still have a problem iCloud backup now
Then restore settings to get rid of any bugs.
-
Does anyone know how to turn off this setting when your phone is at a certain angle turns on without you pressing the button side feed or House? Please if you know tell me!
Settings > display and brightness > raise to Wake
-
I have a Brother HL2140 printer. When I turn it on and press the go button, all 3 LEDs light up and then begin to Flash. I need help...
The brother of contact support.
-
Problem with Internet connection - connect only after you turn off allowing then again.
It is a recent problem that unfortunately I have very little information on. In other words, after months be happy and connection to the internet when you start the computer has decided he won't d more, instead he wants to deactivate and then activate the connection to the local network before it will connect.
There is no error message and the convenience store could not find that something wrong then directed me here! I tried to diagnose too but didn't know what was wrong either. There are two computers connected through a router and the other is fine, ISP technical support assures me it's nothing to do with them either.
It left me speechless. I tried the system restore, I crossed the two diagnoses available in internet options and I called ISP support. Although this isn't a direct threatening problem, it's one of those little niggles you want just leave.
If anyone has any ideas on how to fix things, I'd be grateful.
* Acer Revo running Win 7.
Hi tmaxwell83,
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
3. What is the type of internet connection you use?
This would happen if the NIC driver is corrupt or needs to be updated.
I suggest that you install the updated drivers for the network adapter on the computer by visiting the network card or the computer manufacturer Web site, the check if it works fine.
Updated a hardware driver that is not working properly
Network adapter problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
"Error 49 - Turn Off Service, then press"-M251nw LaserJet200
HP Laserjet 200 - M251nw series
OS X 10.7.5
The printer keeps displaying:
"49 Service error - turn power off then on.
I bought the printer a Best Buy only 4 days ago new. Only the first night the printer work properly. I installed it on my wireless network and never plugged the USB cable during installation, as suggested in the installation guide. As I said, the first night, it was fine. Printed everything fine, apps worked top (still do actually), and the printer I slept very well that first night. He never woke up (as I know).
Now, he will not sleep. Nothing has changed on my computer, but now I have the "49 Service error." I have no way of knowing what that means that even. She will run her mistake, and if I don't get to her in time (only about 30 second window turn off while he says this), it will turn off and restart. After reboot, it shows the homescreen very well for about 3 minutes, then gives "ERROR 49", and the cycle starts again. This happens about 50 times a day now.
I unplugged for several hours at a time, the printer will behave for about 30 minutes, and then start the cycle again.
I turned off the wireless on this subject, still happens.
I checked and ran an update of the firmware on it, still happens.
I turned off the wireless on my computer (just in case he called to the printer), still happens.
I've uninstalled and reinstalled the drivers on the computer, still happens.
On another note, I have to reinstall the drivers, whenever I want to print it seems. If I let it sit for a day, the computer can't find the printer. Even if that nothing has changed. I do not close my computer, if the drivers are not lost, I turn off the printer (I try to let him sleep, but it will not), but when I go to print, the printer "can not be found", and the document will sit for 15 minutes before giving the impression that and start troubleshooting. Even while the computer and the printer are on the same network. To get an impression, I launch a round of restarting my computer after uninstalling the drivers and unplug the printer power cord. After that I feel, the printer is fine for about 20 minutes, then again any mistake about me.
I am very frustrated with this situation. I'd like to think that just, I have a printer of bum, because the print quality is really outstanding on this thing, and that's exactly what I was looking for, but I can't deal with this much more.
Help, please!
After hours of messing around with these printers, here is how I solved the problem of the 49 service error...
I unplugged the network cable from the printer, then created a network of peer to peer directly from the printer to my laptop. I had to manually assign an IP address from my laptop.
For example: the printer had a manually assinged IP of 192.168.10.45. Subnet: 255.255.255.0. Default gateway: 192.168.10.1
I plugged a cable ethernet directly from the printer to my laptop and assigned to my laptop the following IP model:
IP address: 192.168.10.35
Subnet: 255.255.255.0
Default gateway: 192.168.10.1
Then I logged on the interface chart user of the printer by typing 192.168.10.45 in Internet Explorer. Under the 'Network' tab, I clicked on "Advanced" in the left menu.
Then I unchecked all the "features" except "IPv4", "DHCP" and "printing 9100. Let those audited.
After clicking 'Apply', I have connected the printer to the network and everything works great.
I guess you can reactivate the other feautures to please "Airplay."
Don't know why HP comes with all these processes... He has this hassle and creates so many problems.
If you have any questions do not hesitate to contact me at {{Personal Information deleted}}
~ Chris
Network of elite technology
IT consultant
-
Satellite A40 turn off once all cases the battery is not connected
I felt that my battery has something wrong and I do not use much. I seconded to work on current alternative. The strange thing when windows or linux or any bootable cd running after while the laptop is turned off. But when I entered under windows in safe mode, it is not turned off.
When I plugged the battery again the laptop works very well. I have the Satellite A40. Is this a problem in my power unit or there is a problem in the video card?
Hello
It's not easy to say what could be wrong. The fact is that the laptop should work without any problem with and without the battery.
You said that this happens with any bootable CD but that this problem also occurs if the operating system has started?
However, I put t I think it happened because of the video card. This any sense doesn t.
It looks a bit like an electrical malfunction of the power supply. But it's not easy to tell without any trial. I think you should ask Toshiba service for assistance. -
BlackBerry Smartphones wallpaper won't stay on the home screen after pressing the battery
I'm really starting to get annoyed with this phone!
My wallpaper will not stay on my homescreen after a battery pull or a software reset! I don't understand! This is not new in terms of programming! What is the problem? Is there any solution for this or I'm stuck affecting my wallpaper everytime I reset my phone? Go RIM! It is a ridiculous problem that should have been fix before going out the phone! same for 5-10 sec freeze after you enter your security password to unlock the phone! As well as the slow transformation of cpu for some activities! I'm sticking with this phone at the moment, but I don't have a great feeling for this phone seriously!
Does anyone know what I should do to fix my bottom screen problem?
Hi once again, everything
I have foud a solution for my problem!
By installing the application to the os 6 given by the carrier, I was able to solve this problem! So, I backed up my data first and then downloaded from the EDGE of the application OS 6 AT & T then re-installed and erased all the data! After I reloaded the data I needed and tested! Now my loads of wallpaper is a reboot of the device! But I always saved my image on the internal memory of the phone and not the micro SD! I don't know if you leave image on micro SD so it will again make the same question!
Thank you all for the help!
-
Leaving the iPad on the charger when it is fully recharged bypass the battery and that the iPad runs on an external source as most of the laptop? Or is the battery constantly being drained and charged at the same time?
I often play with my iPad 2 plugged Air (often after full load because I think the iPad is directly using the external power source) and I don't know if that night to the iPad or not.
No, there is no harm in using the iPad during the charge or leave fixed after the battery has reached 100%.
-
I don't seem to be able to put a screenshot in this post but the screen is basically more often black. I tried to uninstall and reinstall Firefox, to no avail. He suddenly began to do last week. Is there something I can do to put it right? I'm running a 64-bit Dell laptop if that's any help?
Thanks for any help you can provide!
Kind regards
PaulIs working in normal mode with hardware acceleration disabled?
If it works in Mode safe mode and normal mode with all extensions (Firefox/tools > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit ' (Windows: Firefox/file > quit;) Mac: Firefox > quit Firefox. Linux: Firefox/file > exit)
-
I have photosmart all-in-one c310 printer and whenever we have a power outage, the printer will not print at startup power upward. I have spend hours trying to download drivers or updates and check the printer that says it's fine and the computer that says it can't find the driver. The last 2 times I finally got running again, but I did something different every time and I don't remember what it was. I just spent 2 hours on a hamster wheel keeps back me for a download, after you download it twice, I finally understood was the SAME download (the 3rd time I was directed here) and the printer STILL does not work. I'm pulling my hair out and I'm about to throw this worthless piece of scrap metal by the window. Help!
Are you connected wireless? If so, you will need to reconnect the printer to the network of the SCW wireless on the printer itself. When you have power, he can hit just the printer off of the network from the router and just reconnect.
-
I have reset the browser firefox, deleted all caches and cookies and deleted and restored my bank account online. No matter what I do account page always seems to cool off at least two times before that I can move forward. I tried to use other browsers and they work very well without the slightest trace of this problem. Any ideas please?
Start Firefox in Safe Mode {web link} by holding down the < shift >
(Mac options) key and then from Firefox. Is always the problem? -
Has anyone have the same problem and maybe a Solution?
Hey mksuperplus,
Please check this link Windows 10 update breaks Microsoft Adobe CC - missing - MSVCR110.dll community for the solution.
Kind regards
Nicos
-
My CQ57 229YWM compaq persario is not turn on no lights except her flashing battery three times I did everything I thought about doing but did not work.
What should I do?
You mean just for the cable of the wall power brick? You're lucky, those that cost a little money.
-
Satellite M100 - screen turns white when you press the bottom of the frame of the screen
Hello
I have a strange problem with my Satellite M100.
When to start the laptop, the screen is totally blank.
When hand press to the middle part of the bottom of the frame of the screen (black plastic frame) the display looks fine, as long as I am pressing on it.
When let pressing, the screen becomes funny,Also noticed, when top screen downstairs, appears blurry white screen.
But the screen is OK as long as I pressed the plastic at the bottom of the screen frame.Any idea would be greatly appreciated, want to confirm which part is faulty, so I can avoid replacing the whole LCD.
Thanks in advance.
Hello
For as far as I know the small part called FL inverter is hidden behind the frame s screen.
Maybe it s something with this part. Who knows it would be necessary to test this
On the other hand, one cannot rule out a display problemYou see, it's hard to say, really a malfunction which part
Therefore, it would be advisable to contact a technician for laptopSee you soon
Maybe you are looking for
-
YouTube does not work after upgarde to SMART TV 39L4300VE
Can someone help me how to do youtube works after the recently upgarde to youtube? None of the video can be play for SMART TV model 39L4300VE? It shows error when I click to play.
-
How to use webcam? TouchSmart 520
I've never used the front webcam and need to know at least the basic functions.
-
HP g6-1047sx: any update for HP G6-1047sx
Hi guys, maybe you can help me with this one, what I can upgrade my computer hp laptop g6-1047sx 32-bit of Windows 7. Thanks in advance.
-
Windows Explorer has disappeared from my HP Vista computer
After that Windows Explorer failure has disappeared from my system, when I rebooted my computer. Is it possible to download a new copy?
-
Acer laptop CD/dvd drive does not
My cd/dvd drive worked perfectly until a few days ago but now it only reads CD/DVD blank and I can't burn discs as well. Device Manager indicates that the sound works properly and drivers are up to date. I tried to uninstall drivers and reinstall, no