My norton toolbar is disabled in the registry. How can I fix it

Similar Questions

• The sign @ arrives with the ' button and the "comes up with the 2 - How can I fix?"

  The @ sign with the ' key and the 'types of sign with button 2.  How can I fix?

  It looks like your dad keybaord was put at the disposal of the UK.  This can happen if you accidnetally you press a special combination keys that been implemented as the means of getting that deliberately.  Here's what to do: -.

  1 go to Control Panel, region & language, keyboards & languages, Change keyboards, general tab, select the correct keyboard in your area * if isn't one already shown [click on Properties... to see a preview of the keyboard layout] or click Add... & Select a new keyboard from the list [while you are in the list, click on the Preview button to see a preview]. When you have finished adding a new keyboard, move it to the top of the list using the buttons on the dialog box.

  [* The region for which the keyboard was made and for which its route has been set.  [I understand that there is a "US International keyboard" who suffers from this confusion between change quite easily, unless you have a need for special versatility, choose a keyboard layout United States specific instead if you find that this is what has been implemented on your system]

  2 then go into Control Panel, region & language, keyboards & languages, Change keyboards, tab bar of language and, if you regularly change the language settings, make the hidden language bar.

  3 then go to Control Panel, region & language, keyboards & languages, change keyboard, tab Advanced key settings where you can see the shortcut key sequence that could you have this problem by chance. You will also see the change key sequence that you may want to change by clicking on the button change the key sequence and affecting the switch input language & keyboard Switch not [when I changed them, I had to set not to switch input language and accept the change, then return to the dialog box set not to switch keyboard configuration].

• My firewll turns off and I have to go put on all the time how can I fix the itf

  Firewall current and must be rebooted how can I do to stay on

  Hi karnak72,

  ·         You did changes to the computer before the show?

  ·         Which antivirus program is installed on the computer?

  Method 1: Some suites of security software disable Windows default firewall.  Check if there are all these parameters in the program installed on your computer.

  Method 2: Run the following tool Fixit.

  Diagnose and automatically fix problems of Windows Firewall service

• My sreen has been moved to the right in all sites, but only on the internet how can I fix?

  my screen is on the right when I open internet, this isn't simply the computer internet. I want to focus, make them normal again.

  go to help at the top of your browser and then click on restart with disabled modules, firefox closes, then it will open with firefox comes from base, then you can swicth back on the Add-ons and it should be ok, ive just done it myself and it worked

• I can't download anything on the internet how can I fix it? !!! I use windows 7

  I use windows 7... When I try to download anything on the internet, the download could not be finished it will post about 100KB more or less, and then download it interruptions can be solved without reinstalling windows?

  Hello

  -What security software is installed on your computer?

  Please, try the following methods and check if you are able to download files.

  Method 1:

  Try to download a file on SkyDrive (www.skydrive.live.com) for a test. If the file can be downloaded very well, you may need to contact support for sites to help.

  Method 2:

  Step 1: Log in safe mode with network and try to download files.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If you are able to download files from networking in safe mode, and then put the computer to boot and check.

  Step 2: Put the computer to boot.

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual. See step 7 in the article.

  Method 3:

  Optimization of Internet Explorer.

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Method 4:

  Disable temporarily installed in your computer security software and check.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let us know if that helps.

• The back and forward arrows are grey all the time - how can I fix?

  I am currently using firefox ver 21. However, the front and rear buttons are grayed out and will not work. I'd be happy to re - install the program, but how do I re - install without losing all my favorites and settings.

  Please notify.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• A site has registered some names of user and password but will no longer offer the option; How can I fix?

  Local library website that I use has allowed me to save my data and a child. When I went to add data from other 2 of my children, it only allows me to save usernames and passwords. I can't find any information on why this happened or how to save again. I enter or would like to find a setting to turn this back on this site, or if I could manually the data in a file somewhere. Other sites will still let me save info. This is a setting or something from their web site has changed?

  Expansion of passwords Editor includes a feature that allows you to manually add passwords.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/saved-password-Editor/

• I CLICK ON READ MY EMAILS AND NOW, THE PAGE HAS CHANGED, CAN'T READ THEM I WISH THEYR, D LEAVE HOTMAIL ALONE, HE REPEATS TO ME DONE WITH ERRORS ON THE PAGE HOW CAN I FIX THIS PLEASE

  ERROR AFTER CLICKING ON READING EMAILS MESSAGES

  ·                        Hotmail forums:

  http://www.windowslivehelp.com/forums.aspx?ProductID=1

  They will help you when repost you your question in the Forums above for Hotmail.

  See you soon.

  Mick Murphy - Microsoft partner

• When turning on my computer, the screen is black and I can see only the cursor, how can I fix it? Help, please.

  I think I have a virus or a virus that I was invited then in a different line of pop ups for unwanted ads and many ads of anti-virus indicating that I had the virus.  Last night my computer worked but when I turned on the screen shows my windows option then turns black with only the cursor visible.  I can access the Task Manager by simultaneously pressing Ctrl-alt-delete, but I'm not too handy with computers.  Any help would be greatly appreciated.

  Thank you.

  Sandra

  If you can open the Task Manager try to manually open the desktop computer

  In the list of running tasks, type "explorer" (without the quotes) and run it.

  Which starts the desktop computer?

  If not boot in safe mode and try to load a restore point from before you had the problem.

• I am a member of the CC, how can I fix to reinstall my CC & apps on my second computer?

  I am trying to install on my second computer Member CC CC, but the CC menu remains empty. I had tried my CC Adobe & apps on the migration to my new laptop, but was invited to re - download when I tried to open applications. I was able to re - download CC, and the icon reappears in the top menu bar, so I thought that it was installed successfully.  However, when I tried to add Photoshop and the other apps that I use, they do not appear in the drop-down list CC, and I'm still not able to access it.  They act like they start, but then I invite me to go 'Get Application Manager'.

  Do I need to uninstall everything using the uninstaller for each application programs and start over?

  Thanks for the tips!

  Thank you, Sheena, but I already used those and that's why I posted - they do not solve the problem.  I found myself going through the cat (very nice) support Adobe and having to remove a bunch of stuff from my library, and then use a product cleanser, and then re-install from scratch.  The usual unistalls weren't working, but again did!

• upper and lower filters in the registry how ca I get it back

  in the registry, how can upper and lower filters I get them back. CD and dvd not being recognized

  Hello

  You are not absent from these filters, you do not want in most cases.

  This is for Windows 7 and Vista is very similar.

  ------------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I put the wrong address of the user, how do I fix

  I put the wrong address of the user, how can I fix - should I cancel and then reallocate?

  Hello

  You are right.

  All you need to do is just to remove the user from the license, and then assign the license to the correct e-mail address.

  Using creative cloud | Creative cloud to teams

  Kind regards

  Sheena

• How to load Firefox version I was using before the update for Firefox 29? The Norton toolbar has worked in the last version, but not in Version 29.

  I've just updated to 29 of Firefox. Since the update the Norton Toolbar is no longer compatible. The Norton toolbar has worked in the last version of Firefox that I had installed. Is there a way to get back to the last version of Firefox where this toolbar is compatible and keep all the settings (favorites) in the old version I am reloading? All my passwords (99) are in the toolbar Norton Safe ID. Now I can not connect to many Web sites.

  Hello jimb01, yes norton supports only the stable versions of firefox and Firefox 29 you are using the beta version of the browser. You can download the normal version of firefox 28 of https://www.mozilla.org/firefox/channel/#firefox and install it on top of your current installation...

• Disabled in the registry Security Center.

  A Malware "think point".  Took care of him.  Ran Malwarebytes.  Now Security Center starts.  went into services and rebooted but stop down after about 10 seconds.  A ran spybot and it found

  Cool WWWSearch.OleHelp: $F3F8B2C7 [SBI] Autorun settings (svchost) (registry value, nothing of fact)
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\svchost

  Cool WWWSearch.OleHelp: $F3F8B2C7 [SBI] program file (file, nothing of fact)
  C:\Documents and Settings\Gene\Application Data\Microsoft\svchost.exe
  Properties.Size = 96256
  Properties.MD5 = 9CC7AE444249B2B10CDD86F12A0A3298
  Properties.filedate = 1288239004
  Properties.filedatetext = 2010-10-27 23:10:04

  Microsoft.WindowsSecurityCenter_disabled: [SBI $2E20C9A9] settings (registry change, nothing in fact)
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wscsvc\Start

  How can I fix this?  All my system restore points have gone past the point of reflection problem.

  Thank you

  Gene

  Hello Gene,

  It seems that the Virus or malware is not completely removed from the computer. Iwould suggest you first try to run an online virus scan and remove items infected your computer.

  Run a Virus scan online direct assistance of a care utility.

  http://OneCare.live.com/site/en-us/default.htm

  Also, follow the steps mentioned in the link below as well as to get rid of malware.

   

  How to get rid of malware.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  You can also download Windows Defender on your computer and try to scan the computer using Windows defender and delete infected items.

  http://www.Microsoft.com/Windows/products/winfamily/Defender/scan.mspx

  http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx

  After the audit of scan virus online if you can start the Windows Security Center service. You can also check the dependence of the Security Center service and check if they have been set to automatic and started. You can restart all services of dependence for the Security Center and check if that helps you solve the problem.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Exe files disabled in the registry

  AV. EXE took my Malwarebytes, refusing to run in any capacity. In an attempt to remedy this, I adjusted some registry settings where "av.exe" was mentioned. Specifically, I left the empty parameters. Now, none of my exe files will not work. How can I fix?

  Hello

  See the following message to solve the problem of .exe if necessary once you are sure that the system is clean.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now) and
  Double-click it, and then run it like this. You can rename it back later. Do the same with
  other programs according to the needs. Use this method to others as needed - NOT assume all
  a program deletes all or that it is no other malicious software.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  There are MANY varieties of the latter with a lot of names, but all can be removed with
  the same methods:
  
  Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
  scams to get you to pay for them while they have no advantage at all.

  How to remove all THE varieties of this malware - please read the removal Instructions
  carefully.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform: (use a different name with the '.com'
  extension instead of .exe)
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
  taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.