my old motherboard was brockin so I replaced it with a new one and now I carnt activate windows pleae help

Similar Questions

• My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

  My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

  No, if you want to keep all rights to the service or support from Apple. Not to mention the fact that it then will be bork Touch ID and make the phone unusable if ever, you restore or update of iOS.

  Apple doesn't sell parts of the iPhone. There is no legitimate sources for replacement screens.

• How can I remove a hard disk to the raid set default and replace it with a new one

  Last Friday apparently began one of my raid drives failing.

  As I said on this forum I started having continuous beep.

  I was finally able to get the raid works at a degraded level.  I ordered a replacement hard drive, that happened today.

  (In the meantime, I made twice daily backups of my work...)

  Below is the message that I have the raid of browser-based software:

  Blahblah 09 1000,2 GB RaidSet Member SamSung HD103SJ

  Blahblah 10 GB 1000,2 free SamSung HD103SJ

  Blahblah 11 1000,2 GB RaidSet Member SamSung HD103SJ

  Blahblah 12 GB 1000,2 RaidSet Member SamSung HD103SJ

  (See this thread sooner if you wish!)

  http://forums.Adobe.com/thread/727867?TSTART=0

  
  At any given time when I did the checked the browser interface, I have seen the message failed and degraded

  As I said, I was able to work this weekend on the degraded system.

  This morning I had the new tone and made the rescue and now I use a "full raid" without the advice that a raid was 'free '.

  In all cases, the new drive arrived today.

  Should what precautions I take to integrate the new drive in the raid system.

  I have an OS disk

  and raid 4 TB drives.   One needs to be replaced with the new one I get today.

  Thank you

  Rowby

  Rowby,

  You currently have your background priority set to 20% IIRC, so it will take time to rebuild, but probably a lot less than 24 hours as for new construction. Even with 20% defined, I guess that it will be done in less than 12 hours, but you can set the background priority to 50% and it will be much faster at the expense of access to your raid. Reconstruction of the background is designed to give you access to all your data files and to continue the work, while the data is being rebuilt. You can continue your work, so if it takes 8 or 12 hours to find the full data intergrity isn't all that relevant. Your aura a functional slower than with a raid reaction complete, but has more speed than a single disk.

• My mother in disk hard laws burned and I replaced it with a new one when I went to reload the operating system, it would not accept the access key. How can I get a new one? with out having to buy new software?

  How can I get a new access key for windows xp pro?

  Hello

  There are several potential issues at stake here.

  First of all, make sure that you use the Windows product key is for the full XP Pro version not the upgrade version.

  Secondly, many manufacturers of computers for the last few years have provided computers with Windows XP installed, but a product key of Vista on the side.  If this is your situation, you need to call the manufacturer of your computer for the installation media or call microsoft to "downgrade rights."

  Thirdly, if you use a product key that was provided for Windows XP Service Pack 3, and you use the older installation media, it will not accept this product key.  You need to get your hands on support for XP Service Pack 3.

  Hope that helps.

• My MBPro crashed and I replaced it with a new one. Apple migrated my prem software to my new camera. I can not open them. I'm trying to download the same suite on the adobe site. My question is, can I uninstall existing software first?

  I am on Windows only have saved links for Apple issues, those below can help

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  You can also call your Apple store and tell THEM about migration and programs Adobe, with the request that they share information with all THE Apple stores

• I can't uninstall the old silverlight and replace it with the new version.

  Im trying to uninstall the old version of silverlight and replace it with the new. It won't let me uninstall. Help, please

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest you for the link and check if that helps:

  Uninstall previous versions of Silverlight on Windows

  http://www.Microsoft.com/getSilverlight/get-started/install/uninstall-win.aspx

  Also check out the link to install Microsoft Silverlight:

  Download Microsoft Silverlight

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  Method 2:

  I suggest to consult the article and try to uninstall the program:

  Diagnose and solve the program installation and uninstallation problems automatically

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Let us know if it helps.

• How can I replace my old ID with a new one.

  Yesterday I did and upgrade to 9.2 when finished my old ID pop up with my old email address, try to change but cannot do, how can I replace it with the new.  Sorry I don't have and Ipad 3gen.

  You will need to disconnect from the former Apple ID and then sign in with a new one.

• I downloaded red CS6 plugin and added to the contents of the package, replaced the existing files with the new without saving, now my thumbnails images RED and the color correction do not WORK! How to bring back my old file importerRed! ?? Help!

  I downloaded red CS6 plugin and added to the contents of the package, replaced the existing files with the new without saving, now my thumbnails images RED and the color correction do not WORK! How to bring back my old file importerRed! ?? Help!

  Try asking in the forum Premiere Pro seems to be an Adobe first Pro Lab

• HP Envy 5530: HP Envy 5530 told to replace the color cartridge, even after replacing with a new one.

  HP Envy 5530 said to replace the color cartridge, even after replacing with a new one.  Printer is 1 year old and I replaced the cartridges several times over the past year.  I am enrolled in the program of HP ink.  I can run the printer mode single cartridge using a black ink only and it works with my pc XP, Ipad, Chrome pc and mobile phone.  My pc win 8.1 will not print anything other than a test page.  Printer on the pc file lists always attention required when you try to print from the pc win 8.1.  I believe that the problem may be related to surface of cartridge for printing inside the HP envy heads 5530.  This part is available for purchase, and if so, where?

  I found a work around.  On the pc win 8.1, it seems that the print request must see a reset of the HP envy 5530 to print mode single cartridge.  I just start the pc and then reset the printer by lifting the hatch for the print heads.  That's all.  Once this is done, the 'attention required' message goes to the loan and it is able to print.  It will open a window, which suggests you add the color cartridge, but it will disappear when printing.  Simply open the door once and you can print until you turn off the pc.

• Pavillion G7 - replaced broken by a new screen. Now NO POST/BIOS

  Hey people, I replaced the broken screen with a new one on a G7 Pavillion.

  Now, I get only the rear lights showing.

  I see no post/BIOS or beeps when the portable powes upward.

  1 caps lock LED does not blink error codes, NOR is the num lock key.

  2. no error emits a sound signal or the other.

  3. reinstall the memory and HD. When they came out, I see the errors on the LED caps lock.

  I have read all the post that showed similar questions and have tried all suggestions of hard reset etc..

  Any suggestions?

  Hey,.

  So I found the problem.  It was the connector on the back of the screen.  Although the backlight of the screen came, he didn't display any kind of actuall.

  I removed the display and the cable at the back of the screen.   Re-attached and rebooted and everything seemed to work.

  The system is running, now back.

  In my opinion the connector on the back of the screen is not very strong.  When it seems his actually inserted, it really might not.

  Anyway, thanks a lot for all the help.  Closing this ticket.

  K

• Hard drive has been corrupted and replaced it with the new hard drive but couldn't get the windows genuine back 8

  Original title: recovery of original windows 8

  When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.

  Please help me to get my windows genuine 8 back so I could get additional updates downloaded.

  Hello Vishal,

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.

  See the suggestions posted by Andre Da Costa replied on March 7, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/how-to-get-Windows-8-product-key-in-preloaded/ea0e53ae-3506-4ba2-a092-f266ece7072f?auth=1

  In addition to this, see:

  Product key lost or misplaced (certificate of authenticity) for Windows

  If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.

  Hope this information was useful.

• I had an old iMac and had 2 external drives attached to it.  I got a new iMac and now can not plug old external drives were firewire 400

  I had an old iMac and had 2 external drives attached to it.  I got a new iMac and now can not plug old external drives were firewire 400 how can I hook up t he old external hard drives?

  You need a FireWire 400 adapter FireWire 800 and one FireWire 800 adapter Thunderbolt.

  (141473)

• Hi I had CS 5.5 Student edition (download no CD), but then the hard drive of my computer is dead. My computer has been "fixed", but was completely wiped out. I bought a new computer and want to download again - issue one - I can't find anywhere on the web

  Hi I had CS 5.5 Student edition (download no CD), but then the hard drive of my computer is dead. My computer has been "fixed", but was completely wiped out. I bought a new computer and want to download again - one question - I can't find a way to download the edition of students anywhere on the site, do I just download the normal edition? Two - question because my computer was wiped out how to uninstall / disable one I already downloaded? Because you get only 2 total downloads is that correct? I want to

  Please visit: https://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html

  Concerning

  Megha Rawat

• Pavilion dv6t-2000: replacing old HARD disk with the new SDS and loading the OS with 1 & 2 recovery discs fails

  I just successfully replace the SSD, exchanging an old 250 GB HDD with a new 250 GB HARD drive.

  I started with success, inserted the disc of recovery by the instructions on the screen. Disc 1 and rendered, it succeeded.  When you are prompted, load disc 2, which was also successful.  When asked, in charge of the "application and driver recovery CD" and continued.

  At this point the computer restarted several times, as he said it would be completion of installation of all elements.  Then he came with a message that says: the recovery attempt failed. Select one of the following buttons.

  "Save Log"; 'Details '; 'Retry '.

  Details says:

  ChkErrBB.CMD: Detects an error in the PININST_BBV.

  ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log

  Any suggestions here?

  I update my BIOS before proceeding with the Exchange.

  I found the solution to this problem was already answered here:

  http://h30434.www3.HP.com/T5/notebook-recovery/quot-detect-some-error-during-PININST-BBV-quot/TD-p/2593075

  Thank you!

• Old iCloud on invalid iPhone5S ID, how to replace it with my new ID

  I changed everything on my iPhone 5 to new ID, with the exception of iCloud. How to do that when the old ID is not valid?

  Tried to reset the phone and the content, but he asks the old invalid ID and not the new code. Help, please.

  If you mean that you are prompted for one password to another identifier Apple for your current Apple ID and if it is an earlier version of your current card, not another totally different.

  This feature was introduced to make stolen phones useless to those who stole them.

  However it can also occur when the user has changed their details Apple with Apple ID and not made the same changes to their iCloud account/find my phone on their device before upgrading to iOS 7 or if you are restoring from a previous backup done before you have changed your contact information and other circumstances.

  The only solution is to change your Apple ID to its previous state with Apple to my Apple ID with your current password, you need not to access to this address, if it has already been used with your Apple ID, nor do you need to check it out, once you have saved these details, enter the password as requested on your device and then turn off "find my phone" and delete the account of your device. It may take a few moments to remove the account.

  You then need to change your identifier Apple returns to its current state, save it once more and then log in using your existing Apple ID Finally, re - turn on "find my phone" once more.

  This article provides more information about locking Activation.