My page is too large for the screen and I don't see any site unless I move the bar back, I tried to reboot in safe mode, but it would not

Similar Questions

• When I open a tab/icon on my computer is much too large for my screen and I can't use my computer; 3 boxes in the upper right corner.

  When I open a tab/icon on my computer is much too large for my screen and I can't use my computer; 3 boxes at the top right corner with the-, square and X are too far to the right to do anything. How can I fit on my screen, so I can use my computer?

  Hello

  Please contact Microsoft Community.

  This problem is limited to any icon or it happens with all?

  Did you change to the computer?

  I suggest to refer to the following methods and check to see if it helps:

  Method 1:

  Install the latest display driver and check

  Uninstall the driver from Device Manager display.

  a. close all programs. This will ensure that the programs do not interfere with the update of the driver.
  b. right-click on my computer, and then click Properties. This will bring you from the System Properties menu.

  c. click Device Manager
  d. expand the display column of cards by clicking on them. This will show the graphical current map that is using your computer.
  e. right click on the adapter, then select Properties.
  f. click on the driver tab. This tab displays information about the current driver, as well as options to update, delete, uninstall, and back the driver.
  g. click on uninstall
  h. restart the computer

  You can install the latest display driver for download on the site of computer manufacturing, same driver will reinstall automatically after the restart, if the computer is connected to the Internet.

  Method 2:

  I suggest you try the system restore. Restore the system to a restore point when your computer was working fine

  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  You can also check the Device Manager to see if the video card has a yellow exclamation on it with an error any:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/device-management

  I hope this helps.

  Kind regards
  Anusha

• When the scaling in the layout, 1st page prints correctly, but the following pages were not properly/too large for the paper, parts of text missing scale

  When you try to print in Firefox and when the scale to the size of the page in the page layout, the first page prints correctly, but the following pages do not scale correctly and are too large for the paper, with the parts of the text are cut off at top and right. It is not fixed by checking or unchecking the scaling / shrink to fit page width "ignore" in the print window, or by changing the scale percent.

  I am running Firefox 15.0.1, on Mac OS 10.5.8.

  The same problem happens in preview print and if I save the copy in a .pdf file

  I tried all the fixes in the how to and others in various forums with no improvement.

  This happens everytime I try to print a document from scaling upwards or downwards in Firefox.

  I note the bug has been fixed and should in Firefox 21 right now, it will mean the use night http://nightly.mozilla.org/

• How do I resize Photoshop - it is too large for the screen of my Macbook Pro and I can't resize corners?

  Photoshop is too large for the screen of my Macbook Pro.  I can't access the sizing handles - they are off the screen and I can't drag.  Any solution?

  You see the buttons in red, yellow, and red window? If for this, click on the green.

  If you don't then you may be in mode full screen, and pressing once or twice on the "F" key to return to normal mode.

• When you try to transfer a file of 8 GB on external hard drive 'file too large for the destination system message' to get there is that much space on disk

  When you try to transfer a file of 8 GB on external hard drive 'file too large for the destination system message' to get there is that much space on disk

  Hello

  Discs formatted with the FAT be limited to files with a maximum of 4 GB. You can format outside
  drive drive with NTFS, contact the manufacturer if necessary pilot or split the file into parts under
  at 4 GB.

  Overview of FAT, HPFS, and NTFS file systems
  http://support.Microsoft.com/kb/100108

  How to go beyond the limit of 4 GB on FAT32
  http://lazybit.com/index.php/2007/03/01/how_to_get_over_the_4gb_limit_fat32

  -------------------------------------------------------------------------------------------------------------------------

  The ZIP file and then divided the ZIP which helps maintain the integrity of sharing files and restoring.

  Zip and Split - free
  http://zipandsplit.toolazy.me.UK/

  Split and Zip - free
  http://www.jtoolgame.com/tools/splitzip.html

  Akhir Split Zip - free
  http://www.mydigitallife.info/2009/04/24/Akhir-split-zip-splits-files-into-smaller-zip-files/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• "The file is too large for the destination file system? How to move this file to another folder with this error?

  Working with Windows 7. I'm trying to move files to other readers. . What is the work around whan "" the file is too large for the destination file system"is the error messages. Can it be fixed so you can move the files

  Either there is not enough space on the destination or the size of the file is larger than the destination system can accept, for example FAT32 cannot have a file size more than 4 GB.

• The file is too large for the file system

  While the installation of a new Virtual Machine or add a new hard drive to ESXi, I get and error message saying 'the file is too large for the file system. Could someone help to find out what it is and how to fix it?

  What is the HARD disk that you want to add to your virtual machine?

  It may be a problem with the block on your Lun size

  1 MB = 256 GB

  2 512 GB

  4 MB = 1024 GB

  8 = 2048 MB

• of course, HTML5 version is too large for the screen of the mobile device

  Hello

  He must be an old question, but I couldn't dig up a response.

  I published a few projects Cp7 for SWF and HTML5. Dimensions of the project are 1100 x 650. The evolving "Content HTML" option is disabled. Published a zip file that has been transferred to our LMS.

  On a desktop computer, it plays very well. On a smartphone, it plays, but the film is much too big for the screen. Have you tried with Chrome and FF, but this makes no difference.

  Any advice would be much appreciated.

  Best regards

  Marvin DuBois

  The evolving "Content HTML" option is disabled.

  Select this option, and then will scale the content to the screen on all devices.

  I don't know if there's a sequel to did not scale on desk and sliding scale, it's all or nothing.

• My screen is too big for my screen and I can't fix it

  For some reason, my screen is now too big for my screen. I can see is over the top (File, edit, minimize, close) or down (the Start button, the clock) at the same time without having to move my mouse in these articles. But it's not fair when I use the internet. That's all the time. When I try to change the resolution, it doesn't change what I see on my screen and I do not see how much of it. Restart do no good either. I have an Eee PC Netbook, model 1005HA. It is brand new. Can anyone think what I can try? Thank you!

  In fact, I realized what it was. Apparently, my screen was changed into a different mode, to do this. How he got that way, I don't know, but it's fixed now. Thank you!

• Windows XP Installer does not not for updates or MS Office 2010. Error says Safe Mode, but I'm not in it.

  Windows XP Installer doesn't work is not for the automatic updates or MS Office 2010. Error says Safe Mode, but my machine is not in Mode without failure.

  When I try to run MS Office 2010, it starts a dialog box "preparing to install...." "even if I had used it for a few years. In the end, it fails and tells me whether I'm in Mode safe or I need to reinstall Windows Installer, I have done several times.

  I can automatically download updates and they seem to be installed, but all fail at the end.

  Any ideas on how to address this problem? Yes, I know that it is probably recommended to buy a new PC, but I need this machine operate fully for the next months. Then by reloading the operating system does not, either. He told me that my XP disc is the wrong version.

  Thanks in advance for any ideas.

  Hello

  1. What is the exact error message that you receive?
  2 have you made changes on the computer before this problem?
  3. all of the updates fail to install?
  Method 1: Make sure that the Windows Installer service is not set to disabled.

  (a) click Start, click run and type services.msc and press Enter to open Services.
  (b) click the Windows Installer service, and then click Properties.
  (c) if the startup type box is set to Disabled, change it to Manual.
  (d) click on OK to close the Properties window.
  (e) right click on the Windows Installer service and then click Start. The service should start without errors.
  (f) click on the file menu, and then click exit.

  Method 2: Error message "Could access the Windows Installer Service" when you install a program in Windows XP
  http://support.Microsoft.com/kb/315353
  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756
  Also note: Please, do not KB315341 (how to perform an upgrade on the spot (reinstallation) of Windows XP)
  Method 3: You can also download the latest version of Windows Installer from the link below:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
   
  Reference: troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation issues
  http://support.Microsoft.com/kb/906602
   
   
  
   
   

• I use 'best home Ever' and itwent too large for the screen and my firefox too bar isn't there?

  I use a Best Ever home page to my home page and my son was using the computer while I wasn't there and it changed somethings. The 'homepage' is giant size now and I don't know how do it as if it was. Also the toolbar file, bookmarks, etc. is gone.
  I'm not the best to try to figure out what to do with the computer!
  I have no idea how some of the 'installed plugins' (belo) got there?

  Try to press and hold CTRL on the keyboard and press 0
  the control key is on the left background (& right)
  0 is the digit zero

  Using Ctrl + 0 to reset the zoom, it is fixed for each site, note.

  • See the font size and zoom - increase the size of web pages

  To get your toolbar back, try pressing the Alt Key keyboard (it's probably next to the space bar) and may temporarily cause the menu bar to display, pressing V then T should give you options to set the toolbars you want to display for example, the bookmarks toolbar. Note your sone may well make use of the firefox button, which also provide similar access to features

  • See the menu on the Firefox button instead of the toolbar from the view menu <-clickable links (blue)

  Be in full-screen mode, which also causes the menu bars disappear, display, try pressing the F11 key on the keyboard (wait a few seconds as the screen to redraw) should switch you to the full screen in.

  One thing you can in view of the future is implemented on your Vista operating system separate accounts for your self and your son, so that way everyone can to some extent make changes the way they like without unduly harming the other.

  When Setup like that each user has their own profiles for firefox and once again the changes can be made separately.

  There could be other reasons for your problems, but I assume that your son has just forgotten to redefine the parameters on those that you had used.

• my screen resolution is too large for the screen on my monitor. I can't get it back to the right size.

  I can't my screen where I can see it properly. Everything is too big and I don't know what to do.

  is today

  Only the web pages or the UI as well?

  Reset the page zoom on pages that cause problems: view > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)
  See the font size and zoom - increase the size of web pages and the font size and zoom - increase the size of web pages and http://kb.mozillazine.org/Zoom_text_of_web_pages

• The text is too large for my screen

  The text is too big for my new monitor Samsung (22A300B); How can I reduce the size of the text for all of the text is adapted to the screen? My list of contacts (including addresses) 1/3 of m's reliever; y right screen. How can I display the list of contacts to reveal the name and the list of transfer to the left clolumn of my screen to free up this space so I can more easy read my emails?

  Hello

  1 have had any changes made on the computer before the show?

  2. are you using the web browser or mail client to access emails?

  3. what browser you use on the computer?

  4 Windows operating system is installed on the computer?

  5. the problem only occurs with the e-mails?

  If you use Internet Explorer, I suggest you for the link and check if that helps:

  Change webpage text size in Internet Explorer

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-webpage-text-size-in-Internet-Explorer

  Note: section applies to operating system Windows XP, Windows Vista and Windows 7 with Internet Explorer 7 and 8.

  If the problem is not resolved, please provide more information to help you best.

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

• Firefox window is too large for my screen. Mac Firefox 29.0.1

  Using Mac OS X 10.9.2. Firefox worked fine before the last update. It doesn't matter if I'm in a window or full screen. The lower part of the window is constantly at the edge of the screen.

  Hi tremph,
  Thank you for your question. You can change the window size with some cool add ons Automatic Window Resizer and Firesizer.

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise! to keep the comments: config page.
  3. What is the function http://kb.mozillazine.org/Browser.display.screen_resolution

• The "iTunes" item cannot be copied because it is too large for the size of the volume

  I am trying to copy my iTunes of 26 GB on a disc (empty) 128 GB flash file. I get the message (above) that the file is too large. Help, please!

  A volume in FAT32 cannot store files of 4 GB or enjoyed, regardless of the amount of free space it is on the disk. Reformat it in exFAT, NTFS or Mac OS extended, as you wish.

  (139802)