My Panel of Business Catalyst works not even after re - import the site. How should I do?

Similar Questions

• Windows will work not day after I installed the windows updates.

  The next day, I installed the Windows updates, I turned on my laptop a short Vaio splash screen is displayed and a black screen comes up saying that "Windows couldn't start. A recent hardware or software change might be the cause. "I don't have the installation disc of Windows that it suggests to use the software is preinstalled.  The safe mode and last known good configuration and the start windows normally get Windows running.  It is simply scrolls a list of code and ends with a line crcdisk.sys, goes to a blue screen for less than a second, then goes to black screen.  All the help I could get to address this issue would be greatly appreciated.

   

  If Safe Mode doesn't work no and you don't have a Vista DVD from Microsoft, do a repair disc to do a startup repair or a system restore:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=1, 24,26,66,9,70,5,72

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  See you soon.

  Mick Murphy - Microsoft partner

• My contact form does not work, not even in business catalyst

  My contact form does not work, not even in BusinessCatalyst, need help so I need to work, my BusinessCatalyst site is http://foodtrucksdecolombia.BusinessCatalyst.com and it works in my own server which is www.foodtrucksdecolombia.com need

  I see what you mean now. Seems to be a problem with your phone field. Did you by chance change the email for a field phone field? I see that you do not have a field of electronic mail and an email field is required for the form to work. If I add an email to the contact number field, it works fine.

• I have several websites in Muse. Everything was fine until last night. When publishing to Business Catalyst I get a message, teling me the following: unknown authentication problem - shared unknown error: 80. What should do?

  I have several websites in Muse. Everything was fine until last night. When publishing to Business Catalyst I get a message, teling me the following: unknown authentication problem - shared unknown error: 80. What should do?

  Hello

  To resolve this problem, you will need to disconnect muse and connect again.

  Here are the steps to the disconnection of Muse:

  1. help > log out.

  2. Once signed on restart Muse (please sign using Adobe ID if she invites to connect)

  You should be all set.

  Concerning

  Vivek

• Every great product - does not show my model of the site layout

  I'm working on a project (can't post links to it at the present time, the person that I asked that I keep it confidential) but I'm developing a site for it using Business Catalyst with webCommerce and I already have the design of the page layout in Dreamweaver and then used to create a model of Business Catalyst for pages.

  I created catalogs and began importing its products, but I have two questions. Although first level catalogues show the layout of the site very well, those who have a second level did not, despite seslected the default for them - instead, they show a version of odd look that is stripped of all the CSS formatting... Also, each product all of the shows not my layout of the site, and instead shows the same CSS stripped version.

  I'm new to BC, and I know I'm missing something here - is - anyone able to give me some advice on what I'm missing?

  Also, I am currently using the free trial 30 days of British Colombia, and I have already let him know that I will have some difficulty learning the program so it will take me a little more long-she's cool with it

  Hi Mike.
  To me, it sounds like he did not / his CSS and other paths to script. This is the common problem with new people in British Colombia.

  Lauren, make sure that all your CSS, javascript and image in your model as early...

  "SRC ="/yourfolder/yourcss.css "so that / tell BC to read root. without it or if you ... / , you will see the questions.

• My Belkin router has stopped working. After talking to Belkin support, we got it to work, but I can't access the site of iiNet connection.

  original title: Wireless router problems

  My Belkin router has stopped working the other day, so I tried the usual stuff (turning on an etc) in the end rang Belkin and after about an hour the router started working again, but would go only on the iiNet connection site! Go figure, not even with them. The woman to the Belkin told me to ring my ISP I did, and they got me online, however, my printer, the laptop and the iPhone is no longer will connect wireless. They were all working perfectly before the router dropped out.

  I went through all the procedures that several times. Uninstalled and reinstalled the printer and the router... still does not work.

  The printer can not just to find the wireless network. The test report said that everything went except the SSID, which has been a FAILURE. How can this be when I haven't changed the

  SSID?

  I've updated as well.

  Hoping really frustrated, can someone help!
  Thanks in advance!

  Hello

  1 are there any changes or updates made on the computer before the show?

  2. What is the exact model of the router number?

  3. do you get an error message? If Yes, what is the full and exact error message?

  4. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Check out the links and check if that helps:

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  The link applies to the Windows Vista and Windows 7 operating system.

  Problems of network with a router in Windows XP

  http://support.Microsoft.com/kb/315978

• Why my Muse formatting does not disappear when I open the site in DW CS6? I need to change the PayPal shopping cart code to account for my shipping options. I exported the Muse test in a folder and then created a new Site in DW using this file, so any CSS

  Why my Muse formatting does not disappear when I open the site in DW CS6? I need to change the PayPal shopping cart code to account for my shipping options. I exported the Muse test in a folder and then created a new Site in DW with the help of this file, so all CSS should be there, but I don't see on the page about the elements without formatting, any stop to the left. Thank you!

  PS: Muse will be the most impressive program ever when they fix these bugs or drop because not every user will be paying through the nose for Business Catalyst. Grrrrrrrrr.

  Best approach would be not to use the PayPal widget and instead copy and paste the PayPal code embedded in an object > object to insert the HTML in Muse. This way you can edit the HTML code to embed PayPal code from Muse and without having to modify the exported code.

• Pop - up window asking if I want to known password don't pop up why I'm not in private browsing, and the site is not on the list of exceptions please help

  I can not the firefox window to ask me if I want to remember my password. I'm not in private browsing. The site is not on the list of exceptions in the security zone where all other sites of passwords are stored.

  Hello, Web sites can specify whether browsers should be able to save the name of user and password (through the AutoComplete = "off" attribute in the login form in the html source code)-it is often the case when a high level of security is probably held by these sites.

  You can either install an addon or use a bookmarklet to work around this restriction.

  Usernames and passwords are not saved

• Processor/fan continues to run even after turning off the laptop

  I'm using Inspiron 15 3542

  I've updated my OS to Windows 10, but sometimes will not stop the fan from the processor/even after discontinuation of the laptop (as well as the display goes off)! The fan continues and continues. And after this laptop won't turn on even! I have to open the battery, and then it lights up!

  I downloaded almost all the software required for my laptop dell for Windows 10 x 64 software download through bit.

  PS: I searched the forum google/checked, and the solution I found was to download Intel Management Engine. I did download and install it, but the problem seems to stay...

  Kindly help and thanks in advance!

  Sorry for the double post!

  Found a solution: https://www.dell.com/support/home/in/en/indhs1/Drivers/DriversDetails?driverId=NFY3D&fileId=3497768106&osCode=WT64A&productCode=inspiron-15-3542-laptop&languageCode=EN&categoryId=FW

  I have installed, be informed after several tests

• Save and exit feature available in FF6, even after I adjusted the browser.showquitwarning

  Save and exit feature available in FF6, even after I adjusted the browser.showquitwarning

  Firefox 4 and later versions Save the previous session automatically, so it is no longer need for the dialog box asking if you want to save the current session.
  
  Use ' file > leave "or" Firefox > Exit "(Mac: ' Firefox > quit Firefox") If you want to restore multiple windows.
  
  You can use ' history > restore previous Session ' to get the previous session at any time.
  
  You may need to click the Firefox orange/gray button to see history.
  
  There is also a button 'Restore previous Session' on the default on: Home home page.

  Another possibility is to use:

  • Firefox/tools > Options > General > startup: "When Firefox starts": "show my windows and tabs from last time '.

• Windows import program does not close after you import photos from a camera.

  Windows import program does not close after you import photos from a camera. It is frozen on the desk and the computer must be restarted to use the program again, windows does not detect a problem, how to fix it.

  original title: importer of photo and video for windows

  Hello

  1. which version of the operating system is installed on the computer?
  2. don't you make changes on the computer before the show?

   
  Method 1:
  You can perform a clean boot and check if the problem occurs.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 2:
  Alternatively, you can change settings for importing pictures and videos in windows by following the steps from the link.
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos
   

• create dvd Windows will not import the mp4, how to get around it, someone knows?

  create dvd Windows will not import the mp4, how to get around it, someone knows?

  It must convert your mp4 to WMV format video, and then add the wmv in Windows DVD Maker.

  There are other formats supported by Windows, but I chose WMV format because it is the most reliable and foolproof format for Windows.

  You can google for a free video converter. No need to buy one, unless you are a 'huge' in the making of films and others.

  I use Prism video converter. It's free.

  I'm not fan of movie maker. Prism is what I need it to do.

  http://Prism-video-converter.en.softonic.com/

• Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  I have download all necessary Windows 7 updates, but they are not installed. Can anyone help?

  Kind regards

  Mitch

  Hi Mitchell,

  Please uninstall and reinstall the ESET program and check if it solves the problem:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  For further assistance:

  ESET knowledge base

  http://KB.eset.com/esetkb/index?page=home&locale=en_US&option=None

  Please post us with the result.

• Muse error 'public_html' folder does not seem to point to the site

  Still getting this error after checking my entries: muse error 'public_html' folder does not seem to point to the site

  What other ca I do?

  Try to use public_html/domain.com where domain.com is your site domain name.

  Related articles:

  https://forums.Adobe.com/thread/1581846?start=0&TSTART=0

  Folder does not appear to point to the site

  Thank you

  Sanjit

• Says Lightroom serial number entered is not valid after repair of the system occurred, require disabling series in order to reactivate the same computer

  Says Lightroom serial number entered is not valid after repair of the system occurred, require disabling series in order to reactivate the same computer

  Can you please send me the serial number, you have a private message ?