My Photoshop reads very low ram!

Similar Questions

• the windows of the cc of photoshop is very low in 4 k monitor

  I bought a new Lenovo laptop with 4K monitor, then I install photoshop cc, but the windows and the police is very small and it is difficult to see.

  the windows of the cc of photoshop is very low in 4 k monitor

  How can I solve this problem?

  my device is: Lenovo 20378

  Hi hussain alhaiky,.

  Greetings.

  Open PS, click edit - preferences - interface and change the UI scale to 200%

  Click ok, and then restart Photoshop.

  Concerning

  Rohit

• curve in photoshop with very low angle = pixely

  OK, for a particular design, I tried to make a curve like this as a backdrop for a white text:

  

  but, as you can see, the end result (only the bottom curve) is enough pixely, I know it's from the perspective of the curved space by being so close dish that a large number of pixels are spread over neighbouring countries.

  Y at - it a good technique that I can use to avoid the pixelish look? I applied a shadow very subtle to help relieve try it... but he always looks below par for me.

  advice most welcome.

  Vielen Dank im Voraus

  Use a higher resolution. How do you get the curve?

  Your screenshot doesn't show much, you should have zoomed in a bit.

• Why 4 GB of ram exhibits very low performance in vista 64-bit?

  IAM using windows vista 64 bit and I have installed 4 GB of ram I noticed very low performance and low score 4.5 I tired to change the positions of the ram and tried to use a different kind of ram, but my score of 4.5 with 2 GB or 4 GB ram sucked into this score with a low yield iam very disappointed of what can one help me?

  2 * 2 GB samsung pc2 6400 4 GB
  and I tried transcend pc2 5300

  HI BUD85

  Contrary to what said 'DaGreenOne' on 'thread lock', I can assure you that we will not do.
  We strive to help you with this problem.  However, I kind of sharing what he or she said several suggestions have been posted but nothing is your problem.  There was some good suggestions posted here.

  It's frustrating, I know.  Question: If you put the 'original' of return RAM in the system and restore the system back to how it was when you bought, 1st you get the experience index you originally?  This is assuming that you are ready to perform a system recovery which erases the hard drive clean and make it the way it was when manufacturing built the machine.

  Please confirm you "not" mix the different types of RAM in the computer, which means that you put in two sticks of 6400 and two sticks of 5300 (these numbers used for example)

  Thank you

  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I open my application on my Macbook pro using bootcamp, the photoshop CS3 opens very low.  How can I solve this problem?

  When I open my application on my Macbook pro using bootcamp, the photoshop CS3 opens very low.  How can I solve this problem?

  Legacy versions do not support the higher resolutions / poster of the retina. Refer to this:

  My UI elements appear tiny. | Error postal codes of Mylenium

  Mylenium

• my picture is very low in photoshop - how to increase the size

  My images is very low - how to increase look a size so I can manipulate the color?

  Hi art1203,

  You need to go to the Image menu > Image size to change the size of the image in Photoshop.

  Tutorial reference: resize an image. Tutorials Photoshop Adobe CC

  If you want to only increase the view, you can use the zoom tool to zoom in the image:

  Work with the Zoom tool. Adobe Photoshop CC tutorials

  Kind regards

  Claes

• LR catalog is very low on space

  Often, I get a pop up message that my disk containing my LR catalog is very low on space, and he says there are at least 20 MB of available space. The fact is however that I have 36 GB (Yes, GB) available. What should do?

  Your problem is a problem of operating system, is not a problem of Lightroom.

  Good reading what follows a post on another site on the management of space free PC HARD drive.

  City. "Best answer: the amount of space used on your hard drive and how his organization (if you defragmented recently or files are not unionized) affect your speed when reading or writing to the HARD drive." If you are using latest software such as games and photo and video editing equipment you need to keep at least 10% of your free HARD disk for virtual memory (where the pc stores recently used for his work with a program to basically free RAM).

  Generally as a rule of thumb:
  (1) delete or transfer the data to your not planning on using for a while or use rarely on a drive or a second drive hard (I recommend a second hard disk if you store a lot of large data files such as videos on your pc).
  (2) uninstall all of the programs that you do not intent to make regular use of old games and other software that is rarely used or has not been used for a while just to create your pc work more hard.
  (3) remove any programs that you do not use that are shipped with your pc. There is generally a 1/2 dozen or better programs you can remove which come in a pack of pc.
  (4) defrag often, often depending on how you use your pc, and how much you write on the HARD drive and remove it. For some people once a month is enough, for every 3-4 days really heavy users would be better for most of the people weekly 1-2 is a lot.
  (5) when you do a defrag not so a cleaning disk before you defrag to get rid of unnecessary files pc stores when to perform the task.
  (6) your PC will work substantially more slow when your HARD drive is full of 50% (when its almost empty). It is simply because it has more data to sift through. find a specific tree in an empty field is much easier to find a specific tree in a forest. The only problem this causes really is slightly longer wait times until you reach approximately 10% of HARD disk space. Once you dip below 10 percent, you can run into problems of virtual memory simply because left them with not enough space to increase the virtual memory. This could ultimately lead to some program your work to crashing. If you want to have 10% more free on your main HARD drive.

  Note: Some say 20%, technically you can cram full, but his will alter the performance to do this. As mentioned the most comprehensive hard disk the longer it will take to defragment it (defragmentation unless space empty to put temporary files).

  If you keep a large number of data files transfer disk too (I always keep everything on the disc with a master disc and the backup disk in the event of a single disk is destroyed) OR get a second HDD.

  If you have just a files of many programs (or large program files) that occupy space but you get full you will need to invest in a bigger primary drive. (which means you need to invest in the OS software, unless you have a copy already practicing).

  End of quote.

• Photoshop is very slow in a very high-powered computer

  Hello to the entire community.

  Recently, I have a new PC and I all CC buyed adobe software.

  Here are the specs of my PC:

  -W7 64 bit

  -Seasonic M12II EVO-750W 80Plus Bronze

  -Samsung 850 series PRO 256 GB 2.5 "SATA 3

  -Extreme6 ASROCK X 99

  -Intel Core i7 - 5820K 3.3 GHz CPU

  -RAM: G.Skill 32 GB DDR4-2133 (F4-2133C15Q-32GRK, Ripjaws 4 black)

  -NVIDIA Quadro® K620 2 GB GDDR5 Low Profile in bulk

  -GIGABYTE GeForce GAMING OC - G1 GTX970 4GB

  -CORSAIR Hydro Series H105

  As you can see, I have 2 graphics card, the 970 for games and use common and the Quadro for uses of the work.

  The thing is, software like After Effects and first works very well, but Illustrator, Indesign, and especially Photoshop works very slowly, in the case of the Ps, so slow even with small files...

  I do not know why get this if I have a very nice computer. Maybe one of you know the solution or what happens? I tried to find a solution to the search in internet, but I can't find it again.

  Thank you very much!

  My hypothesis would be bug in the (update of the GPU manufacturer) video card driver, bug in a third-party utility (antivirus, firewall, etc.) or a corrupt font that is originally font previews to spend too much time (try to disable the font previews).

• Equium A200 1v0 - DVD Volume very low

  Hello!

  I noticed DVD playback volume is very low (even when the cursor of the volume on the drive and windows is max had). MP3 playback is very good and volume is much stronger, he just seems to be a problem with playback of the DVD. I tried a Toshiba DVD player software and Windows media player, but they give the same result.

  Someone at - it suggestions?

  Thank you.

  Audio controller: Realtek
  OS: Windows Vista editions Home Premium

  Hello

  I presume that you have played the MP3 from the HARD disc and movies from a CD/DVD player

  In the control panel - settings, you will find different audio audio controllers
  You must choose the reading and put all the controllers of possible sounds at a higher level.

  Best regards

• Satellite A100 - very low speaker volume

  Hello

  Recently, the volume of my speaker has been very low - barely audible.
  The speakers are Realtek High definition.

  The volume is set at 100%. I checked the properties of reading, recording and sounds and they all work very well.
  The problem occurs if I play CDs, videos online or applications such as RealPlayer - anything really.

  Any advice would be much appreciated.

  Thank you

  Gary

  Hello

  I guess you are which means that the sound card (it s Realtek High definition) and not speakers ;)
  However, have you checked the settings in the control panel-> Manager Realtek HD?

  Do it! There are a lot of different parameters that control the quality of the sound and there you can assign different audio effects

  I think you should check this certainly!

• Computer says disk C and F are weak and memory Windows is very low. and I have the same thing in so many programs.

  I have windows xp home edition, he received from a friend. Tells me disk C and F are close to full. Make cleaning disc, but not enough. AND says the window is very low on storage space. Don't know what to delete and keep programs are

  http://Windows.Microsoft.com/en-us/Windows-Vista/preventing-low-memory-problems

  Read what you and answer a few questions about your system:

  1. What is your current antivirus?

  2.

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  You can change the personal information.

  3. look in disk management, how many partitions? How much free space on each?

  4. optimize your pc:

  Stanley Zhang tips

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  ·                                 MalwareBytes (FREE)

  ·                                 SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

• Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone?

  Webcam with integrated microphone.

  Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone? more details on settings please

  to check your setting first:

  Right click the speaker icon in the notification area and choose: Adjust Audio properties.

  Or: Control Panel, sounds and Audio devices.

  Volume tab: click Advanced under Speaker settings and open the drop-down list for the speaker setup and choose your speakers, click on apply.

  Click the performance tab and move the sliders to the complete and best, click OK.

  According to the Volume of the device, click Advanced.

  On the page of the Volume control, click Options in the menu, click Properties.

  Mixing should be your system and not one of your pickups.

  With reading selected all the check boxes.

  Click record, peripheral mixing system, check all the boxes.

  Click play again, and then click OK.

  Volume control, "as you like it".

  Vague, put the max slider.

  All others are ok in the middle.

  Close the Volume control.

  Now we will install your micro Genius:

  Click on the Audio tab:

  Audio playback: System.

  Sound recording: click the menu drop down and choose your Genius mic, click on apply.

  Click the voice tab:

  Reading of the voice commands: System.

  Voice recording: click the menu drop down and choose your Genius mic, click on apply, click OK

  When you want to use your Web Cam microphone, you will need to go back and select again instead of your micro Genius.

• HP Officejet Pro 8500 best has come out very low but the printer works fine.

  I was always able to make great copies.  The quality of the document that I copy is excellent and I've copied before.  Now everything I copy is very low and cannot be read.  The printer works without any problem.

  Hey 1265yankee,

  I see that you have a problem of quality of the copy with your Officejet Pro 8500 (A910) a model-all-in-one.  Have you tried to reset the printer hard and ensured that the device is connected to a wall outlet directly?

  • Unplug the printer while on
  • Unplug the other end of the power cord from the wall jack directly
  • Wait 30 to 60 seconds
  • Plug the unit back to

  Also, take a look at the steps in the document found here.  The document is not directly applicable in the present case, but the steps are the same for your question.

  Let me know how it goes.  If this does not solve your problem, then I have the steps to perform a factory reset on this product to see if an internal reset will be able to get the device to work as expected.

• Windows 7 crashing on a regular basis, at startup I get continuous beeps which go at a level very low after 30 seconds.

  I have a problem with Windows 7 crashing on a regular basis,

  The following error can be detected,

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 2057

  More information about the problem:

  BCCode:                                               7a

  BCP1: FFFFF6FC4004A5F8

  BCP2: FFFFFFFFC000000E

  BCP3: 0000000080AF4BE0

  BCP4: FFFFF880094BF000

  OS version: 6_1_7601

  Service Pack: 1_0

  Product:                                               256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\051014-44772-01.dmp

  C:\Users\Alun Davies\AppData\Local\Temp\WER-128997-0.sysdata.xml

  I don't know if it's the same problem but on startup, I get the continuous beeps, who go to a level very low 30 seconds.

  Any help will be appreciated

  Thank you

  Original title: failure of Windows

  Hello

  "beep" codes normally indicate a hardware problem / failure.

  Go to your computer manufacturer's website and look at the specifications of your PC to see what BIOS you have

  Then read this on the 'beep' error codes to try to see what failed:

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  If you are unable to determine the hardware problem yourself, contact the manufacturer if under warranty.

  If it is not under warranty, find a good repair shop premises to take.

  See you soon.

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892